|
"1553 Interface Test" (Test 001)
|
| |
|
5.2.2.1.1: Command, Telemetry, and Data Bus Protocol - SC |
|
5.2.2.1.3: Data Format |
|
5.3.3.5: Command Format |
|
5.3.14: Ancillary Data from SC |
|
5.3.14.1: SSR Usage |
|
5.3.14.2: LAT In or Out of SAA |
|
5.3.14.3: GPS Status |
|
5.3.14.4: Transmitter Status |
| |
|
"Additional Science Processing - GRB detection and location" (Test 012a)
|
| |
|
5.3.10.2: LAT GRB Detection |
|
5.3.10.2.1: GRB Location Accuracy |
|
5.3.10.2.2: Modification of GRB Criteria |
|
5.3.11.1: Burst Filtering |
| |
|
"Additional Science Processing - Repointing Logic" (Test 012b)
|
| |
|
5.3.11.3.1: Send Alert Message |
|
5.3.11.3.3: Process Attitude Data |
|
5.3.11.4: GRB Message to GBM |
|
5.3.11.5: LAT Closeout to GBM |
|
5.3.11.6: GRB Alert Message Latency |
|
5.3.11.7: LAT GRB Repoint Request Message to SC |
| |
|
"Command Functional" (Test 002a)
|
| |
|
5.2.2.1.2: Command Rates |
|
5.3.1.4.1: Soft Reset |
|
5.3.1.10.1: EPU Secondary Boot |
|
5.3.1.10.2: SIU Secondary Boot |
|
5.3.3.1: SC Command Processing by SIU |
|
5.3.3.2: Command Execution Notification |
|
5.3.3.3: Command Completion Status |
|
5.3.3.4: Command Dispatch |
|
5.3.3.6: Command Execution |
|
5.3.3.7: Command Execution Sequence |
|
5.3.3.8: Multiple Block Commands |
|
5.3.3.9.1: Data Integrity Errors |
|
5.3.3.9.2: Parameter Validation |
|
5.3.12.1.2: TOT Parameters Stored in File |
|
5.3.12.2.2: Threshold Scan Parameters Stored in File |
| |
|
"EPU Internal Configuration Test" (Test 006b)
|
| |
| |
|
"Electronic Calibration" (Test 008b)
|
| |
| |
|
"Event Filtering - Reception of Events and Verification of Filtering Algorithm
" (Test 008a)
|
| |
|
5.2.1.2: Interface from the Event Builder |
|
5.3.9.1: Event Filter Rates and Capacity |
|
5.3.9.3: Event Filter Bypass |
|
5.3.11.2: Burst Buffering |
| |
|
"FSW and LAT initialization" (Test 009a)
|
| |
|
5.3.1.1: Power-up |
|
5.3.1.2: Boot from SUROM |
|
5.3.1.3: Boot with Watchdog Safeguard |
|
5.3.1.4.4: Reset Source |
|
5.3.1.5: Store System Errors |
|
5.3.1.6: Automatically Send Errors |
|
5.3.1.7: Retrieve System Errors |
|
5.3.1.8: Boot Status |
|
5.3.1.9: Boot Housekeeping |
|
5.3.1.11: LAT SEU Protection |
|
5.3.1.12: LAT Memory Scrubbing |
| |
|
"FSW and LAT re-initialization and recovery" (Test 009b)
|
| |
|
5.3.1.4.2: SIU Reboot Signal from SC |
|
5.3.1.4.3: Event Processor Reboot |
|
5.3.2: Watchdog |
| |
|
"File Management and Memory Upload and Dump Verification" (Test 002b)
|
| |
|
5.3.7.1: Directory Create |
|
5.3.7.2: Directory Delete |
|
5.3.7.3: File Delete |
|
5.3.7.4: File Copy within a Processor |
|
5.3.7.5: File Copy from SIU to EPU |
|
5.3.7.6.1: File Dump Command |
|
5.3.7.6.2: File Dump Data |
|
5.3.7.6.3: File Dump Cancel |
|
5.3.7.7.1: File Directory Dump Command |
|
5.3.7.7.2: File Directory Dump Data |
|
5.3.7.8.1: File System Status Dump Command |
|
5.3.7.8.2: File System Status Dump Data |
|
5.3.7.9: File Loads |
|
5.3.7.10: Upload Cancellation |
|
5.3.7.11: Memory Pool Status Dump |
|
5.3.7.12.1: EPU Memory Dumps |
|
5.3.7.12.2: SIU Memory Dumps |
|
5.3.7.12.3: Memory Dump Data |
|
5.3.7.12.4: Memory Dump Cancel |
|
5.3.7.12.5: Memory Loads |
|
5.3.7.12.6: Memory Load Data |
|
5.3.9.2: Event Filter Reprogramming |
|
5.3.11.7: LAT GRB Repoint Request Message to SC |
| |
|
"GRB Handling/Repointing Requests" (Test 011)
|
| |
|
5.2.3.1: Discrete Signals from the GBM to the LAT |
|
5.3.10.1.1: GRB Alert Message from SC |
|
5.3.10.1.2: GRB Alert Message from GBM Instrument |
|
5.3.10.1.3: GRB Interrupt from GBM Forwarded by SC |
|
5.3.11.8: GRB Repoint Request Response Message |
| |
|
"LAT Diagnostic and Calibration Modes" (Test 014)
|
| |
|
5.3.12.1.1: TOT Measurements |
|
5.3.12.1.2: TOT Parameters Stored in File |
|
5.3.12.1.3: TOT TACK delay |
|
5.3.12.2.1: Threshold Scan Measurements |
|
5.3.12.2.2: Threshold Scan Parameters Stored in File |
|
5.3.12.2.3: Threshold Scan TACK Delay |
|
5.3.12.3: TKR Trigger Check |
|
5.3.12.4.1: Configure ACD Charge Injection Calibration Mode |
|
5.3.12.4.2: ACD Charge Injection |
|
5.3.12.4.3: ACD Charge Injection Calibration Mode Data |
|
5.3.12.5.1: Configure CAL Charge Injection Calibration Mode |
|
5.3.12.5.2.1: CAL Charge Injection Triggers |
|
5.3.12.5.2.2: CAL Charge Injection Charge |
|
5.3.12.5.3.1: CAL Charge Injection Histogram |
|
5.3.12.5.3.2: CAL Charge Injection Calibration Mode Data Telemetry |
|
5.3.12.5.3.3: CAL Charge Injection Calibration Mode Data Histograms |
|
5.3.12.5.3.4: CAL Charge Injection Calibration Mode Data Event Data Option |
|
5.3.13.1.1: ACD Cosmic Ray Sample Events |
|
5.3.13.1.2.1: CAL Log-Accept Occupancy Histogram |
|
5.3.13.1.2.2: CAL Log-Accept Occupancy Histogram Content |
|
5.3.13.1.2.3: CAL Log-Accept Occupancy Transmission |
|
5.3.13.1.3.1: CAL Range Occupancy Histograms |
|
5.3.13.1.3.2: CAL Range Occupancy Histogram Content |
|
5.3.13.1.3.3: CAL Range Occupancy Histogram Transmission |
|
5.3.13.1.4.1: CAL Log-Accept Occupancy Rates Accumulation |
|
5.3.13.1.4.2: CAL Log-Accept Occupancy Rates Content |
|
5.3.13.1.4.3: CAL Log-Accept Occupancy Rates Transmission |
|
5.3.13.1.5.1: CAL Trigger Request Rates Accumulation |
|
5.3.13.1.5.2: CAL Trigger Request Rates Content |
|
5.3.13.1.5.3: CAL Trigger Request Rates Transmission |
|
5.3.13.1.6.1: CAL Log-Accept Occupancy Data, Detailed Accumulation |
|
5.3.13.1.6.2: CAL Log-Accept Occupancy Data, Detailed Histogram |
|
5.3.13.1.6.3: CAL Log-Accept Occupancy Data, Detailed Transmission |
|
5.3.13.1.7.1: CAL Trigger Rates, Detailed Accumulation |
|
5.3.13.1.7.2: CAL Trigger Rates, Detailed Content |
|
5.3.13.1.7.3: CAL Trigger Rates, Detailed Transmission |
|
5.3.13.1.8.1: CAL Range Occupancy Data Accumulation |
|
5.3.13.1.8.2: CAL Range Occupancy Data Content |
|
5.3.13.1.8.3: CAL Range Occupancy Data Transmission |
|
5.3.13.1.9: CAL Cosmic Ray (CR) Calibration |
|
5.3.13.1.9.1: CAL CR Calibration Enable |
|
5.3.13.1.9.2: CAL CR Calibration Disable |
|
5.3.13.1.9.3: CAL CR Calibration Prescale Triggers |
|
5.3.13.1.9.4: CAL CR Calibration Trigger |
|
5.3.13.1.9.5: CAL CR Calibration Trigger - Additional |
|
5.3.13.1.9.6: CR Calibration Data |
|
5.3.13.2.1: ACD Trigger Mode |
|
5.3.13.2.2: ACD Pedestal Data |
|
5.3.13.2.3: CAL Pedestal Value Data |
|
5.3.13.2.4: CAL Pedestal Histogram Data |
|
5.3.13.2.5: TKR GTRC Rates |
| |
|
"LAT Performance Monitoring and Operations" (Test 016)
|
| |
|
5.3.5.3: Alert Telemetry |
|
5.3.8.1.1: Occupancy Monitoring |
|
5.3.8.1.2: Warm Channel Occupancy Data |
|
5.3.8.1.3: All Occupancy Data |
|
5.3.8.2.1.1: Acquisition of VETO Rates from GEM |
|
5.3.8.2.1.2: Adjustable Accumulation Period |
|
5.3.8.2.2: Level 1 Trigger Rates |
|
5.3.8.2.3: Monitor CNO rates |
|
5.3.8.2.4: Random Rates |
|
5.3.8.2.5: 24-bit Compressed Raw Data |
| |
|
"LAT Pointing Calculations" (Test 010a)
|
| |
|
5.3.11.3.2: Receive Attitude Data |
|
5.3.11.3.3: Process Attitude Data |
| |
|
"LAT Thermal Control System (TCS)" (Test 015)
|
| |
|
5.3.19.1.1: Sensor to ADC Mapping |
|
5.3.19.1.2: Set of Sensors to be Read |
|
5.3.19.1.3: Set of Sensors for Algorithm |
|
5.3.19.1.4: Raw ADC Data |
|
5.3.19.1.5: Control Parameters |
|
5.3.19.2: Thermal Control Initialization |
|
5.3.19.3: Convert ADC to Temperature |
|
5.3.19.4: Filter Input |
|
5.3.19.5: Determine Heater Setting |
|
5.3.19.6: Shut-Down |
|
5.3.19.7: Thermal Constraints for Power-On |
|
5.3.19.8: Load Shedding Action |
|
5.3.19.9: Survival Limit Action |
|
5.3.19.10: Watchdog Open |
|
5.3.19.11: Watchdog Stop |
|
5.3.19.12: Heater Control Signals |
|
5.3.19.13: TCS Telemetry |
| |
|
"LAT Time Signal Processing" (Test 010b)
|
| |
|
5.3.4.3: GPS Message from SC |
|
5.3.4.4: LAT Clock Correlation |
|
5.3.4.5: Time Stamp Accuracy |
| |
|
"Narrowband Telemetry Verification" (Test 003)
|
| |
|
5.2.1.4: Command, Configuration, and Data Collection Interface to the Instrument Subsystems |
|
5.3.5.1.1: LAT Housekeeping Data to SC |
|
5.3.5.1.2: LAT Housekeeping Data Set |
|
5.3.5.1.3: Housekeeping |
|
5.3.5.1.4: TKR HSK Anomaly Response |
|
5.3.5.1.5: ACD HSK Anomaly Response |
|
5.3.5.1.6: CAL HSK Anomaly Response |
|
5.3.5.1.7: Low Rate Science |
|
5.3.5.2: Diagnostic Telemetry |
|
5.3.5.3: Alert Telemetry |
|
5.3.6.3: Deadtime Monitoring |
|
5.3.19.13: TCS Telemetry |
| |
|
"Operational Modes - Safe Modes" (Test 013a)
|
| |
|
5.3.14.2: LAT In or Out of SAA |
|
5.3.15: Mode Control |
|
5.3.16.1.1: Safe Mode Notification from SC |
|
5.3.16.1.2: Safe Mode Notification to Ground |
|
5.3.16.2.1: Load Shedding Notification from SC |
|
5.3.16.2.2: Load Shedding Notification to Ground |
|
5.3.18.1: Configure ACD for SAA |
|
5.3.18.2: Configure CAL for SAA |
|
5.3.18.3: Post-SAA Reconfiguration |
| |
|
"Operational Modes - Science Modes" (Test 013b)
|
| |
|
5.3.6.1: Deadtime during Normal Operations |
|
5.3.6.2: Deadtime During Gamma Ray Bursts |
|
5.3.8.1.1: Occupancy Monitoring |
|
5.3.8.1.2: Warm Channel Occupancy Data |
|
5.3.8.1.3: All Occupancy Data |
|
5.3.8.2.1.1: Acquisition of VETO Rates from GEM |
|
5.3.8.2.1.2: Adjustable Accumulation Period |
|
5.3.8.2.2: Level 1 Trigger Rates |
|
5.3.8.2.3: Monitor CNO rates |
|
5.3.8.2.4: Random Rates |
|
5.3.8.2.5: 24-bit Compressed Raw Data |
|
5.3.15: Mode Control |
| |
|
"SIU/EPU CPU-to-CPU Communications Functional Test" (Test 006a)
|
| |
|
5.2.1.1: EPU-SIU Interface |
| |
|
"T&DF, TKR, CAL, and ACD Internal Configuration Test" (Test 007)
|
| |
|
5.2.1.4: Command, Configuration, and Data Collection Interface to the Instrument Subsystems |
|
5.3.17.1: Configuration of Subsystems |
|
5.3.17.2: Configuration by File |
|
5.3.17.3: Readback of Subsystems |
| |
|
"Vehicle Signals Interface Verification" (Test 005)
|
| |
|
5.2.2.2: Discrete Signals from the SC to the LAT |
|
5.2.2.3: Selection of Primary or Redundant Discrete Signals |
|
5.2.2.4: Discrete Signals from the LAT to the SC |
|
5.3.4.1: GPS Time Hack from SC |
|
5.3.4.2: GPS Time Hack Integrity Check |
| |
|
"Wideband Telemetry Verification" (Test 004)
|
| |
|
5.2.1.3.1: Science Data Rate |
|
5.2.1.3.2: Science Data Volume |
|
5.2.1.3.3: Science Data Packet Format |
|
5.2.1.3.4: Science Data Packet Synchronization Word |
| |