Test 009a: "FSW and LAT initialization"
This test shall verify that the SIU and EPU(s) can correctly boot themselves, report system errors during primary boot in housekeeping telemetry, establish a reference state based upon information in non-volatile storage, signal boot status over a discrete line to the SC (SIU only), and then power and initialize the remaining LAT subsystems in an orderly manner, resulting in a known reference state at the end of the process. This state shall be verified through internal configuration read back and LAT telemetry. The test shall also verify that the SIU and EPU(s) can write a boot error log and return the contents of the log in telemetry, on command.
Context (help)
Related Requirement(s) (help)
| Section | Description | Other Tests | |
| 5.3 | Functional Requirements | ||
| 5.3.1 | Boot | ||
| 5.3.1.1 | Power-up | ||
| 5.3.1.2 | Boot from SUROM | ||
| 5.3.1.3 | Boot with Watchdog Safeguard | ||
| 5.3.1.4 | Resets/Reboots | ||
| 5.3.1.4.1 | Soft Reset | 002a | |
| 5.3.1.4.2 | SIU Reboot Signal from SC | 009b | |
| 5.3.1.4.3 | Event Processor Reboot | 009b | |
| 5.3.1.4.4 | Reset Source | ||
| 5.3.1.5 | Store System Errors | ||
| 5.3.1.6 | Automatically Send Errors | ||
| 5.3.1.7 | Retrieve System Errors | ||
| 5.3.1.8 | Boot Status | ||
| 5.3.1.9 | Boot Housekeeping | ||
| 5.3.1.10 | Initiating Secondary Boot | ||
| 5.3.1.11 | LAT SEU Protection | ||
| 5.3.1.12 | LAT Memory Scrubbing |