GLAST/LAT > DAQ and FSW > FSW

FSW Requirement 5.3.12.5.1 (prev, next)

Req. 5.3.12.5.1: "Configure CAL Charge Injection Calibration Mode"

Upon receipt of the appropriate command specifying "abbreviated" or "detailed" configuration, the FSW shall configure the CAL for CAL Charge Injection Calibration Mode, as defined in [TBS CAL document].

Basis (help)

[1] (3.1.3.2.2), [4] (5.4.14)

    1: "Mission System Spec." (NASA 433-SPEC-0001)

      3.1.3.2.2: "Calibration"

      The GLAST system shall perform calibration observations as required during the course of the mission.

    4: "LAT T&DF Subsystem Spec. - Level III Spec." (LAT-SS-00019)

      5.4.14: "Calibration"

      The dataflow system shall provide commands to calibrate and readout the sub-systems.

Context (help)

Function(s)

Test(s)

    014: LAT Diagnostic and Calibration Modes

    This test shall verify that the SIU FSW properly transitions to Diagnostic and Calibration Modes upon command, then properly executes the requested diagnostic and calibration algorithms.