Test 008a: "Event Filtering - Reception of Events and Verification of Filtering Algorithm "
This test shall confirm that fully assembled, properly formatted events are received directly into EPU memory, where they can be processed by EPU FSW. This test shall also verify that the on-board filtering algorithms running on the EPU(s) achieve the purity/efficiency ratios predicted by Monte Carlo. The test shall include running a specific set of scenarios derived from Monte Carlo simulations with known, expected results. The filtering algorithms must provide acceptable results for each scenario in order to pass this test.
Context (help)
Related Requirement(s) (help)
| Section | Description | Other Tests | |
| 5.2 | Hardware Interfaces | ||
| 5.2.1 | Hardware Interfaces Internal to the LAT | ||
| 5.2.1.1 | EPU-SIU Interface | 006a | |
| 5.2.1.2 | Interface from the Event Builder | ||
| 5.2.1.3 | Science Data Interface to the Event Builder | ||
| 5.2.1.4 | Command, Configuration, and Data Collection Interface to the Instrument Subsystems | 003, 007 | |
| 5.3 | Functional Requirements | ||
| 5.3.9 | Event Filtering | ||
| 5.3.9.1 | Event Filter Rates and Capacity | ||
| 5.3.9.2 | Event Filter Reprogramming | 002b | |
| 5.3.9.3 | Event Filter Bypass | ||
| 5.3.11 | GRB Response | ||
| 5.3.11.1 | Burst Filtering | 012a | |
| 5.3.11.2 | Burst Buffering | ||
| 5.3.11.3 | LAT GRB Alert Message to SC | ||
| 5.3.11.4 | GRB Message to GBM | 012b | |
| 5.3.11.5 | LAT Closeout to GBM | 012b | |
| 5.3.11.6 | GRB Alert Message Latency | 012b | |
| 5.3.11.7 | LAT GRB Repoint Request Message to SC | 002b, 012b | |
| 5.3.11.8 | GRB Repoint Request Response Message | 011 |