Test 013a: "Operational Modes - Safe Modes"
This test shall verify that the SIU FSW can perform the correct transition of the LAT into Safe Mode upon command, can properly execute the Safe Mode algorithms, and can perform the subsequent recovery via Engineering Mode. It shall also verify the correct response to SAA entry commands and subsequent recovery.
Context (help)
Related Requirement(s) (help)
| Section | Description | Other Tests | |
| 5.3 | Functional Requirements | ||
| 5.3.1 | Boot | ||
| 5.3.2 | Watchdog | 009b | |
| 5.3.3 | Command Processing | ||
| 5.3.4 | Time Services | ||
| 5.3.5 | Telemetry | ||
| 5.3.6 | Deadtime Management | ||
| 5.3.7 | File and Memory Management | ||
| 5.3.8 | Event Monitoring and Delivery | ||
| 5.3.9 | Event Filtering | ||
| 5.3.10 | GRB Detection | ||
| 5.3.11 | GRB Response | ||
| 5.3.12 | Charge Injection Calibration | ||
| 5.3.13 | Diagnostics | ||
| 5.3.14 | Ancillary Data from SC | 001 | |
| 5.3.14.1 | SSR Usage | 001 | |
| 5.3.14.2 | LAT In or Out of SAA | 001 | |
| 5.3.14.3 | GPS Status | 001 | |
| 5.3.14.4 | Transmitter Status | 001 | |
| 5.3.15 | Mode Control | 013b | |
| 5.3.16 | Safety | ||
| 5.3.16.1 | Safe Mode | ||
| 5.3.16.1.1 | Safe Mode Notification from SC | ||
| 5.3.16.1.2 | Safe Mode Notification to Ground | ||
| 5.3.16.2 | Load Shedding | ||
| 5.3.16.2.1 | Load Shedding Notification from SC | ||
| 5.3.16.2.2 | Load Shedding Notification to Ground | ||
| 5.3.17 | Configuration | ||
| 5.3.18 | SAA Transit | ||
| 5.3.18.1 | Configure ACD for SAA | ||
| 5.3.18.2 | Configure CAL for SAA | ||
| 5.3.18.3 | Post-SAA Reconfiguration | ||
| 5.3.19 | Thermal Control System (TCS) |