Telecommand Packet Index, by LCAT Name within Package

Cmd. Packet (L) APID FC Description (L)

UploadCancel 0x641 1 File Upload Cancel

UploadCommit 0x641 2 File Upload Commit

UploadData 0x641 3 File Upload Data

UploadEPU 0x641 4 File Upload to EPU

UploadStart 0x641 0 File Upload Start

LCI (prev, next)

Cmd. Packet (L) APID FC Description (L)

ABORT 0x67C 2 Abort a running calibration

CALIBRATE 0x67C 1 Initiate the calibration

NOOP 0x67D 0 No operation

LCM (prev, next)

Cmd. Packet (L) APID FC Description (L)

CmdResponse 0x695 1 Change task command confirmation level

CpuReset 0x695 4 Reset a CPU

ErrorCfg 0x694 2 Configure CPU error handling

ImageDump 0x695 8 Dump complete module/task information (to SDI)

ModuleDump 0x695 2 Generate CPU code module listing

MsgOutCfg 0x695 7 Configure MSG output interface

MsgResponse 0x695 0 Change task messaging level

Noop 0x695 6 LCM no-op

ScrubCfg 0x694 1 Configure the memory scrubber

ScrubRun 0x694 0 Run memory scrubber

Stats 0x695 5 Set up the SMON statistics monitor

TaskDump 0x695 3 Generate CPU task listing

TurboReset 0x696 0 Turbo reset command

LFS (prev, next)

Cmd. Packet (L) APID FC Description (L)

DirCreate 0x648 2 Directory Create

DirDelete 0x648 3 Directory Delete

DirDump 0x648 5 Directory Dump

FileCopy 0x648 1 File Copy Local

FileDelete 0x648 0 File Delete

FileDumpCTDB 0x648 4 File Dump CTDB

FileDumpSSR 0x648 8 File Dump SSR

Noop 0x648 9 LFS No-Op

SysCheck 0x648 7 File System Check

SysFormat 0x649 0 File System Format

SysMount 0x649 1 File System Mount

SysRepair 0x649 2 File System Repair

SysStatus 0x648 6 File System Status

LHK (prev, next)

Cmd. Packet (L) APID FC Description (L)

CancelDiag 0x650 4 Cancel a request for diagnostic packets

NewSchedFile 0x650 5 Request a new housekeeping schedule by file ID

NewSchedInst 0x650 6 Request a new housekeeping schedule by CDM instance number

Noop 0x650 3 LHK No-Op Command

ReqDiagPacket 0x650 0 Request a Housekeeping Diagnostic Packet

StopDiag 0x650 2 Stop Diagnostic Sample

SysReset 0x650 1 System Reset

LIH (prev, next)

Cmd. Packet (L) APID FC Description (L)

DumpLimits 0x654 9 Dump the complete limits table

DumpLimitsAdc 0x654 8 Dump the limits table for a single ADC

EnableActions 0x654 2 Enable/disable actions on ADC state changes

LoadLimits 0x654 1 Load ADC limit sets from CDM database

Noop 0x654 0 No operation

SetActionsAdc 0x654 4 Set actions for a limit transition on an ADC

SetLimitsAdc 0x654 3 Set limits boundaries for an ADC

SetNagTimesAdc 0x654 5 Set the nag periods for an ADC

SetPersistAdc 0x654 6 Set persistence time (msec) on an ADC

SetSettleAdc 0x654 7 Set the maximum settling period (msec) for an ADC

LIM (prev, next)

Cmd. Packet (L) APID FC Description (L)

ARR_Abort 0x661 1 ARR Abort

ARR_Response 0x661 0 ARR Response

Bias_ACD 0x663 10 Set ACD Bias Voltages

Bias_ACD_Off 0x663 25 Turn Off ACD Bias Voltages

Bias_ACD_On 0x663 22 Turn On ACD Bias Voltages

Bias_CAL 0x663 11 Set CAL Bias Voltages

Bias_CAL_Off 0x663 26 Turn Off CAL Bias Voltages

Bias_CAL_On 0x663 23 Turn On CAL Bias Voltages

Bias_TKR 0x663 12 Set TKR Bias Voltages

Bias_TKR_Off 0x663 27 Turn Off TKR Bias Voltages

Bias_TKR_On 0x663 24 Turn On TKR Bias Voltages

Config_GBM 0x663 13 Configure GBM Interface Handling

Config_HV 0x663 14 Configure ACD High-Voltage Handling

Config_PID 0x663 15 Configure PID Signals

Hold_Enter 0x663 2 Enter HOLD Mode

Hold_Exit 0x663 3 Exit HOLD Mode

Latc_Config 0x663 19 Call the LATC_cache, LATC_configure, and LATC_ignore functions

Latc_Record 0x663 17 Call the LATC_capture and LATC_consign Functions

Latc_Verify 0x663 20 Call the LATC_capture, LATC_verify, and LATC_consign functions

Load_Shed 0x662 1 Load Shed

Look_At_Me 0x664 0 Send The Look-At-Me Command

Main_Feed_On 0x663 4 Enable Main Power Feed

Noop 0x663 18 LIM No-Op

Pig_Record 0x663 16 Call the PIG_record Function

Pig_Verify 0x663 21 PIG Verify

Power_Off 0x663 7 Disable Instrument Power

Power_On 0x663 6 Enable Instrument Power

SAA_Enter 0x663 8 Enter SAA

SAA_Exit 0x663 9 Exit SAA

TOO_Abort 0x663 1 TOO Abort

TOO_Start 0x663 0 TOO Start

LMC (prev, next)

Cmd. Packet (L) APID FC Description (L)

acd_tile_all 0x69C 3 ACD Tile Counters (All)

acd_tile_pair 0x69C 2 ACD Tile Counter (Pair)

cal_lrs 0x69C 0 CAL Low Rate Science Counters

noop 0x69C 6 No-op

stop_count 0x69C 4 Stop Active Counter

tem_deadtime 0x69C 5 TEM Deadtime Low Rate Science Counter

tkr_lrs 0x69C 1 TKR Low Rate Science Counters

LPA (prev, next)

Cmd. Packet (L) APID FC Description (L)

Associate 0x675 0 Associates a Handler Configuration ID With A Mode

BurstClose 0x6F1 3 LAT Burst Closeout Telecommand

BurstTrg 0x6F1 1 LAT Burst Trigger Telecommand

Configure 0x674 0 Configures Active Event Handlers For a Mode

GbmCalc 0x660 1 GBM Calc Info

GbmClose 0x660 3 GBM Closeout

GbmRpt 0x660 2 GBM Repoint

Noop 0x675 4 LPA No-Op Command

SetCompress 0x675 5 Sets the Data Compression Level

SetDefault 0x675 6 Set Default Parameters

SetGrb 0x675 3 Sets the GRB Processing State

SetOutput 0x675 2 Sets the Output Stream States

Start 0x674 1 Starts a Physics Run

Stop 0x674 3 Stops a Physics Run

LRA (prev, next)

Cmd. Packet (L) APID FC Description (L)

CONTROL 0x680 3 Control operation

ESRSEND 0x680 11 Send ESR data to the SSR

LAM 0x680 5 Look-at-me operation

LAMLCB 0x680 6 Look-at-me LCB

LATRESET 0x680 4 Reset the LAT

LOAD 0x680 2 Load registers

NOOP 0x680 0 No-op

READ 0x680 1 Read registers

STATCLEAR 0x680 8 Clear statistics data

STATPERIOD 0x680 7 Set the statistics update period

STATSEND 0x680 9 Send statistics data to the SSR

STATTEMS 0x680 10 Set the mask of TEMs for EBM stats

LSM (prev, next)

Cmd. Packet (L) APID FC Description (L)

Noop 0x690 2 No operation

SIANCILLARY 0x701 2 SC Ancillary Broadcast Message

SIATTITUDE 0x701 1 SC Attitude Broadcast Message

SITIMETONE 0x701 3 SC Timetone Broadcast Message

SSRoutputOff 0x690 0 Turn off echo of Magic 7 commands to SSR

SSRoutputOn 0x690 1 Turn on echo of Magic 7 commands to the SSR

LSW (prev, next)

Cmd. Packet (L) APID FC Description (L)

DumpStart 0x64C 1 Dump the start line system trace

DumpTraceById 0x64C 2 Dump a code trace by numeric identifier

DumpTraceByName 0x64C 3 Dump a code trace by name.

Noop 0x64C 0 No-Op

SetTraceConfig 0x64C 4 Set the values of the trace enable bits.

LTC (prev, next)

Cmd. Packet (L) APID FC Description (L)

CntlProc 0x659 1 LTC Control Start Processing (Internal)

CntlStart 0x659 0 LTC Control Start Readout (Internal)

HtrOnOffCtl 0x658 5 Set heater to always on, or off or automatic control.

Noop 0x658 8 LTC Task No-op

ReStart 0x658 1 Restart and initialize Thermal Control

SetMode 0x658 4 Set thermal control mode to active or passive.

SetParam 0x658 6 Set control parameters to new values.

SetTlmFreq 0x658 7 Set LTC telemetry frequency, 0 is off.

Start 0x658 2 Start control

Stop 0x658 3 Terminate Thermal Control processing

MEM (prev, next)

Cmd. Packet (L) APID FC Description (L)

LMEMDUMPCANCEL 0x644 1 Memory Dump Cancel

LMEMDUMPMEM 0x644 0 Memory Data Dump

LMEMDUMPNEXT 0x644 100 Send Next Dump Packet

LMEMDUMPPCI 0x644 2 PCI Device Header Dump

LMEMDUMPPOOL 0x644 7 Memory Pool Status Dump

LMEMDUMPREG 0x644 3 Processor Register Dump

LMEMDUMPSYMREL 0x644 9 Memory Dump Symbol Relative

LMEMDUMPSYMVAL 0x644 8 Memory Symbol Lookup

LMEMLOADMEM 0x644 4 Memory Write

LMEMLOADPCI 0x644 5 PCI Device Header Write

LMEMLOADREG 0x644 6 Processor Register Write

LMEMNOOP 0x644 10 No-Op

PBC (prev)

Cmd. Packet (L) APID FC Description (L)

LBTBAD 0x640 4 Invalid boot command

LBTERRDUMP 0x640 2 Error code pop

LBTRESET 0x640 1 Warm reboot

LBTRTOSEXEC 0x640 3 Boot RTOS

LBTSTART 0x640 0 Boot code no-op