See Also:

Requirements, Sorted by Number

Tests, Sorted by Name
Tests, Sorted by Number

Requirements

Alert Telemetry
	3	Alert Telemetry
Analog Temperatures
	11	Temperature Sensors
Analog Voltages
	12	Voltage Signals
Ancillary Commands
	1d	Attitude, Ancillary, TimeTone Command Processing
Attitude Commands
	1d	Attitude, Ancillary, TimeTone Command Processing
CPU Boot Process
	9	Boot Cmds/Tlm
Continuous Transmission Signal
	6c	Test Cmds to Set Transmission Duration on the
Counting of No-op Commands
	1c	1553 Command Verification
Data Rate
	6b	Test Cmds to Set Transmission Rates on the SciDataIF
GBM Signals
	1a	1553 Command Reception
	1b	1553 Command Delivery
	1c	1553 Command Verification
ISIS Automatic Repoint Requests (ARRs)
	8	Test Cmds for ARR TC
Input Discrete Lines
	7b	Monitoring of Input Discrete Lines
Introduction and Overview
LAT Telemetry
	1a	1553 Command Reception
	1c	1553 Command Verification
	2	HKP Telemetry
	3	Alert Telemetry
	4	Diagnostic Telemetry
MIL-STD 1553B Communication
	1a	1553 Command Reception
	1b	1553 Command Delivery
	1c	1553 Command Verification
Output Discrete Lines
	7a	Test Cmds for Discrete Outputs
PPS Signal
Packets of Defined Length
	6d	Test Cmds to Set Length of Packets Sent on the SciDataIF
Packets of Random Length
	6d	Test Cmds to Set Length of Packets Sent on the SciDataIF
Pattern Initialization
	6a	Test Cmds to Initialize Patterns on the SciDataIF
Power
	10	Power Control (Towers, ACD, EPUs)
Reporting of Ancillary Command Counts
	4	Diagnostic Telemetry
Reporting of Attitude Command Counts
	4	Diagnostic Telemetry
Reporting of No-op Command Counts
	1c	1553 Command Verification
Reporting of Time Tone Command Counts
Reset Signal
	7c	Cold Boot on Discrete Reset Signal
Routing of Commands
	1b	1553 Command Delivery
SC Commands
	1c	1553 Command Verification
	4	Diagnostic Telemetry
Science Data Hardware Interface
	5	Science Data Hardware Interface
Seed for Random Data Pattern
	6a	Test Cmds to Initialize Patterns on the SciDataIF
Selection of Science Data Patterns
	6a	Test Cmds to Initialize Patterns on the SciDataIF
Time Tone Commands
Transmission Duration
	6c	Test Cmds to Set Transmission Duration on the
Transmission of Pattern Initialization Parameters
	6a	Test Cmds to Initialize Patterns on the SciDataIF
Transmission of Science Data
	6a	Test Cmds to Initialize Patterns on the SciDataIF