See Also:

Requirements, Sorted by Name

Tests, Sorted by Name
Tests, Sorted by Number

Requirements

0	Introduction
0.0	Introduction and Overview
1	ISIS Requirements
1.0	MIL-STD 1553B Communication
	1a	1553 Command Reception
	1b	1553 Command Delivery
	1c	1553 Command Verification
1.0.0	LAT Telemetry
	1a	1553 Command Reception
	1c	1553 Command Verification
	2	HKP Telemetry
	3	Alert Telemetry
	4	Diagnostic Telemetry
1.0.0.0	Alert Telemetry
	3	Alert Telemetry
1.0.1	SC Commands
	1c	1553 Command Verification
	4	Diagnostic Telemetry
1.0.1.0	Routing of Commands
	1b	1553 Command Delivery
1.0.1.1	No-Operation Commands
1.0.1.1.1	Counting of No-op Commands
	1c	1553 Command Verification
1.0.1.1.2	Reporting of No-op Command Counts
	1c	1553 Command Verification
1.0.1.2	Ancillary Commands
	1d	Attitude, Ancillary, TimeTone Command Processing
1.0.1.2.1	Reporting of Ancillary Command Counts
	4	Diagnostic Telemetry
1.0.1.3	Attitude Commands
	1d	Attitude, Ancillary, TimeTone Command Processing
1.0.1.3.1	Reporting of Attitude Command Counts
	4	Diagnostic Telemetry
1.0.1.4	Time Tone Commands
1.0.1.4.1	Reporting of Time Tone Command Counts
1.0.2	ISIS Automatic Repoint Requests (ARRs)
	8	Test Cmds for ARR TC
1.1	Discrete Signal Control
1.1.0	Output Discrete Lines
	7a	Test Cmds for Discrete Outputs
1.1.1	Input Discrete Lines
	7b	Monitoring of Input Discrete Lines
1.1.1.0	Reset Signal
	7c	Cold Boot on Discrete Reset Signal
1.2	Science Data Interface
1.2.0	Science Data Hardware Interface
	5	Science Data Hardware Interface
1.2.1	Pattern Initialization
	6a	Test Cmds to Initialize Patterns on the SciDataIF
1.2.2	Transmission of Pattern Initialization Parameters
	6a	Test Cmds to Initialize Patterns on the SciDataIF
1.2.3	Transmission of Science Data
	6a	Test Cmds to Initialize Patterns on the SciDataIF
1.2.4	Science Data Patterns
1.2.4.0	Selection of Science Data Patterns
	6a	Test Cmds to Initialize Patterns on the SciDataIF
1.2.4.1	Seed for Random Data Pattern
	6a	Test Cmds to Initialize Patterns on the SciDataIF
1.2.5	Data Rate
	6b	Test Cmds to Set Transmission Rates on the SciDataIF
1.2.6	Transmission Duration
	6c	Test Cmds to Set Transmission Duration on the
1.2.6.0	Continuous Transmission Signal
	6c	Test Cmds to Set Transmission Duration on the
1.2.7	Packet Length
1.2.7.0	Packets of Defined Length
	6d	Test Cmds to Set Length of Packets Sent on the SciDataIF
1.2.7.1	Packets of Random Length
	6d	Test Cmds to Set Length of Packets Sent on the SciDataIF
1.3	Other Discrete Signals
1.3.0	GBM Signals
	1a	1553 Command Reception
	1b	1553 Command Delivery
	1c	1553 Command Verification
1.3.1	PPS Signal
1.4	CPU Boot Process
	9	Boot Cmds/Tlm
1.5	Analog Temperatures
	11	Temperature Sensors
1.6	Analog Voltages
	12	Voltage Signals
1.7	Power
	10	Power Control (Towers, ACD, EPUs)