Telecommand Packet Index, by APID within Package

APID FC Cmd. Packet (L) Description (L)

0x641 0 UploadStart File Upload Start

0x641 1 UploadCancel File Upload Cancel

0x641 2 UploadCommit File Upload Commit

0x641 3 UploadData File Upload Data

0x641 4 UploadEPU File Upload to EPU

LCI (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x67C 1 CALIBRATE Initiate the calibration

0x67C 2 ABORT Abort a running calibration

0x67D 0 NOOP No operation

LCM (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x694 0 ScrubRun Run memory scrubber

0x694 1 ScrubCfg Configure the memory scrubber

0x694 2 ErrorCfg Configure CPU error handling

0x695 0 MsgResponse Change task messaging level

0x695 1 CmdResponse Change task command confirmation level

0x695 2 ModuleDump Generate CPU code module listing

0x695 3 TaskDump Generate CPU task listing

0x695 4 CpuReset Reset a CPU

0x695 5 Stats Set up the SMON statistics monitor

0x695 6 Noop LCM no-op

0x695 7 MsgOutCfg Configure MSG output interface

0x695 8 ImageDump Dump complete module/task information (to SDI)

0x696 0 TurboReset Turbo reset command

LFS (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x648 0 FileDelete File Delete

0x648 1 FileCopy File Copy Local

0x648 2 DirCreate Directory Create

0x648 3 DirDelete Directory Delete

0x648 4 FileDumpCTDB File Dump CTDB

0x648 5 DirDump Directory Dump

0x648 6 SysStatus File System Status

0x648 7 SysCheck File System Check

0x648 8 FileDumpSSR File Dump SSR

0x648 9 Noop LFS No-Op

0x649 0 SysFormat File System Format

0x649 1 SysMount File System Mount

0x649 2 SysRepair File System Repair

LHK (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x650 0 ReqDiagPacket Request a Housekeeping Diagnostic Packet

0x650 1 SysReset System Reset

0x650 2 StopDiag Stop Diagnostic Sample

0x650 3 Noop LHK No-Op Command

0x650 4 CancelDiag Cancel a request for diagnostic packets

0x650 5 NewSchedFile Request a new housekeeping schedule by file ID

0x650 6 NewSchedInst Request a new housekeeping schedule by CDM instance number

LIH (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x654 0 Noop No operation

0x654 1 LoadLimits Load ADC limit sets from CDM database

0x654 2 EnableActions Enable/disable actions on ADC state changes

0x654 3 SetLimitsAdc Set limits boundaries for an ADC

0x654 4 SetActionsAdc Set actions for a limit transition on an ADC

0x654 5 SetNagTimesAdc Set the nag periods for an ADC

0x654 6 SetPersistAdc Set persistence time (msec) on an ADC

0x654 7 SetSettleAdc Set the maximum settling period (msec) for an ADC

0x654 8 DumpLimitsAdc Dump the limits table for a single ADC

0x654 9 DumpLimits Dump the complete limits table

LIM (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x661 0 ARR_Response ARR Response

0x661 1 ARR_Abort ARR Abort

0x662 1 Load_Shed Load Shed

0x663 0 TOO_Start TOO Start

0x663 1 TOO_Abort TOO Abort

0x663 2 Hold_Enter Enter HOLD Mode

0x663 3 Hold_Exit Exit HOLD Mode

0x663 4 Main_Feed_On Enable Main Power Feed

0x663 6 Power_On Enable Instrument Power

0x663 7 Power_Off Disable Instrument Power

0x663 8 SAA_Enter Enter SAA

0x663 9 SAA_Exit Exit SAA

0x663 10 Bias_ACD Set ACD Bias Voltages

0x663 11 Bias_CAL Set CAL Bias Voltages

0x663 12 Bias_TKR Set TKR Bias Voltages

0x663 13 Config_GBM Configure GBM Interface Handling

0x663 14 Config_HV Configure ACD High-Voltage Handling

0x663 15 Config_PID Configure PID Signals

0x663 16 Pig_Record Call the PIG_record Function

0x663 17 Latc_Record Call the LATC_capture and LATC_consign Functions

0x663 18 Noop LIM No-Op

0x663 19 Latc_Config Call the LATC_cache, LATC_configure, and LATC_ignore functions

0x663 20 Latc_Verify Call the LATC_capture, LATC_verify, and LATC_consign functions

0x663 21 Pig_Verify PIG Verify

0x663 22 Bias_ACD_On Turn On ACD Bias Voltages

0x663 23 Bias_CAL_On Turn On CAL Bias Voltages

0x663 24 Bias_TKR_On Turn On TKR Bias Voltages

0x663 25 Bias_ACD_Off Turn Off ACD Bias Voltages

0x663 26 Bias_CAL_Off Turn Off CAL Bias Voltages

0x663 27 Bias_TKR_Off Turn Off TKR Bias Voltages

0x664 0 Look_At_Me Send The Look-At-Me Command

LMC (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x69C 0 cal_lrs CAL Low Rate Science Counters

0x69C 1 tkr_lrs TKR Low Rate Science Counters

0x69C 2 acd_tile_pair ACD Tile Counter (Pair)

0x69C 3 acd_tile_all ACD Tile Counters (All)

0x69C 4 stop_count Stop Active Counter

0x69C 5 tem_deadtime TEM Deadtime Low Rate Science Counter

0x69C 6 noop No-op

LPA (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x660 1 GbmCalc GBM Calc Info

0x660 2 GbmRpt GBM Repoint

0x660 3 GbmClose GBM Closeout

0x674 0 Configure Configures Active Event Handlers For a Mode

0x674 1 Start Starts a Physics Run

0x674 3 Stop Stops a Physics Run

0x675 0 Associate Associates a Handler Configuration ID With A Mode

0x675 2 SetOutput Sets the Output Stream States

0x675 3 SetGrb Sets the GRB Processing State

0x675 4 Noop LPA No-Op Command

0x675 5 SetCompress Sets the Data Compression Level

0x675 6 SetDefault Set Default Parameters

0x6F1 1 BurstTrg LAT Burst Trigger Telecommand

0x6F1 3 BurstClose LAT Burst Closeout Telecommand

LRA (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x680 0 NOOP No-op

0x680 1 READ Read registers

0x680 2 LOAD Load registers

0x680 3 CONTROL Control operation

0x680 4 LATRESET Reset the LAT

0x680 5 LAM Look-at-me operation

0x680 6 LAMLCB Look-at-me LCB

0x680 7 STATPERIOD Set the statistics update period

0x680 8 STATCLEAR Clear statistics data

0x680 9 STATSEND Send statistics data to the SSR

0x680 10 STATTEMS Set the mask of TEMs for EBM stats

0x680 11 ESRSEND Send ESR data to the SSR

LSM (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x690 0 SSRoutputOff Turn off echo of Magic 7 commands to SSR

0x690 1 SSRoutputOn Turn on echo of Magic 7 commands to the SSR

0x690 2 Noop No operation

0x701 1 SIATTITUDE SC Attitude Broadcast Message

0x701 2 SIANCILLARY SC Ancillary Broadcast Message

0x701 3 SITIMETONE SC Timetone Broadcast Message

LSW (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x64C 0 Noop No-Op

0x64C 1 DumpStart Dump the start line system trace

0x64C 2 DumpTraceById Dump a code trace by numeric identifier

0x64C 3 DumpTraceByName Dump a code trace by name.

0x64C 4 SetTraceConfig Set the values of the trace enable bits.

LTC (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x658 1 ReStart Restart and initialize Thermal Control

0x658 2 Start Start control

0x658 3 Stop Terminate Thermal Control processing

0x658 4 SetMode Set thermal control mode to active or passive.

0x658 5 HtrOnOffCtl Set heater to always on, or off or automatic control.

0x658 6 SetParam Set control parameters to new values.

0x658 7 SetTlmFreq Set LTC telemetry frequency, 0 is off.

0x658 8 Noop LTC Task No-op

0x659 0 CntlStart LTC Control Start Readout (Internal)

0x659 1 CntlProc LTC Control Start Processing (Internal)

MEM (prev, next)

APID FC Cmd. Packet (L) Description (L)

0x644 0 LMEMDUMPMEM Memory Data Dump

0x644 1 LMEMDUMPCANCEL Memory Dump Cancel

0x644 2 LMEMDUMPPCI PCI Device Header Dump

0x644 3 LMEMDUMPREG Processor Register Dump

0x644 4 LMEMLOADMEM Memory Write

0x644 5 LMEMLOADPCI PCI Device Header Write

0x644 6 LMEMLOADREG Processor Register Write

0x644 7 LMEMDUMPPOOL Memory Pool Status Dump

0x644 8 LMEMDUMPSYMVAL Memory Symbol Lookup

0x644 9 LMEMDUMPSYMREL Memory Dump Symbol Relative

0x644 10 LMEMNOOP No-Op

0x644 100 LMEMDUMPNEXT Send Next Dump Packet

PBC (prev)

APID FC Cmd. Packet (L) Description (L)

0x640 0 LBTSTART Boot code no-op

0x640 1 LBTRESET Warm reboot

0x640 2 LBTERRDUMP Error code pop

0x640 3 LBTRTOSEXEC Boot RTOS

0x640 4 LBTBAD Invalid boot command