"LIM status/summary packet (including LPA and LCI status)" Telemetry Packet

GLAST/LAT > DAQ and FSW > FSW > Index by APID

LimStatus (593/0x251) - Telemetry Packet

"LIM status/summary packet (including LPA and LCI status)" (APP/LHK)

View Options: (help)

Focus:	Maintenance / Operation
Structures:	Abstract / Concrete

Description:

LIM status/summary packet (including LPA and LCI status)

Layout: (hide detail; help)

Offset	S	L	Type	ITOS name	ITOS description
`0x00E`	0	16	`U12`	`LHKRSVLIMSTATUS`	Explicit 16 bit pad in unsigned short
`0x010`	0	32	`U1234`	`LIMTSTATUS`	LIM most recent action status
`0x014`	0	16	`U12`	`LIMTACTION`	LIM most recent action
`0x016`	0	8	`U1`	`LIMTOPMODE`	LIM current operating mode
`0x017`	0	8	`U1`	`LIMTVIRTMODE`	LIM virtual mode
`0x018`	0	8	`U1`	`LIMTSAATRANSIT`	LIM SAA transit status
`0x019`	0	8	`U1`	`LIMTLCISTATE`	LIM state of task LCI
`0x01A`	0	8	`U1`	`LIMTLDFSTATE`	LIM state of task LDF
`0x01B`	0	8	`U1`	`LIMTLPASTATE`	LIM state of task LPA
`0x01C`	0	32	`U1234`	`LIMTTOOREMAINSEC`	LIM TOO, seconds remaining
`0x020`	0	32	`U1234`	`LIMTARRREMAINSEC`	LIM ARR, seconds remaining
`0x024`	0	32	`U1234`	`LIMTDISREMAINSEC`	LIM GBM interrupt disable, seconds remaining
`0x028`	0	5	`U1`	`LIMTTOOPAD`	LIM (spare 5 bits)
	5	1	`U1`	`LIMTTOOSTARTED`	LIM TOO started status
	6	1	`U1`	`LIMTTOOACTIVE`	LIM TOO active status
	7	1	`U1`	`LIMTTOOREADY`	LIM TOO ready status
`0x029`	0	2	`U1`	`LIMTARRPAD`	LIM (spare 2 bits)
	2	1	`U1`	`LIMTARRREPPEND`	LIM ARR repoint request pending
	3	3	`U1`	`LIMTARRGRBSTATE`	LIM ARR GRB state
	6	1	`U1`	`LIMTARRACTIVE`	LIM ARR active status
	7	1	`U1`	`LIMTARRREADY`	LIM ARR ready status
`0x02A`	0	5	`U1`	`LIMTGBMPAD`	LIM (spare 5 bits)
	5	1	`U1`	`LIMTPRIINTALLOW`	LIM GBM primary interrupt allowed
	6	1	`U1`	`LIMTREDINTALLOW`	LIM GBM redundant interrupt allowed
	7	1	`U1`	`LIMTGBMREPALLOW`	LIM GBM repoint request allowed
`0x02B`	0	7	`U1`	`LIMTHVPAD`	LIM (spare 7 bits)
	7	1	`U1`	`LIMTHVALLOW`	LIM ACD high voltage allowed status
`0x02C`	0	32	`U1234`	`LHKLPARUNID`	LPA run ID
`0x030`	0	32	`U1234`	`LHKLPASTARTT440`	LPA run started (seconds)
`0x034`	0	32	`U1234`	`LHKLPASTARTT441`	LPA run started (microseconds)
`0x038`	0	32	`U1234`	`LHKLPAENDT440`	LPA run ended (seconds)
`0x03C`	0	32	`U1234`	`LHKLPAENDT441`	LPA run ended (microseconds)
`0x040`	0	32	`U1234`	`LHKLPASTATUS`	LPA run completion status
`0x044`	0	32	`U1234`	`LHKLPALATCUSEFID`	LPA apply LATC configuration file ID
`0x048`	0	32	`U1234`	`LHKLPALATCIGNFID`	LPA ignore LATC configuration file ID
`0x04C`	0	8	`U1`	`LHKLPADBID`	LPA LPA_DB instance for this run
`0x04D`	0	8	`U1`	`LHKLPAMODE`	LPA run mode
`0x04E`	0	16	`U12`	`LHKLPASPARE`	LPA reserved
`0x050`	0	32	`U1234`	`LHKLCIRUNID`	LCI run ID
`0x054`	0	32	`U1234`	`LHKLCISTARTT440`	LCI run started (seconds)
`0x058`	0	32	`U1234`	`LHKLCISTARTT441`	LCI run started (microseconds)
`0x05C`	0	32	`U1234`	`LHKLCIENDT440`	LCI run ended (seconds)
`0x060`	0	32	`U1234`	`LHKLCIENDT441`	LCI run ended (microseconds)
`0x064`	0	32	`U1234`	`LHKLCISTATUS`	LCI run completion status
`0x068`	0	32	`U1234`	`LHKLCILATCFID`	LCI apply LATC configuration file ID
`0x06C`	0	32	`U1234`	`LHKLCICFGFID`	LCI script file ID
`0x070`	0	32	`U1234`	`LHKLCISPARE`	LCI reserved