LIM Action (APP/LIM)

ITOS Mnemonic:  LIMACTION

View Options: (help)

Focus:	Maintenance / Operation
Structures:	Abstract / Concrete

Description:

Valid LIM actions that are reported in the LIMSTATE telemetry packet.

Definition:

0	Unknown Action (LIMACTUNKNOWN)
	An unrecognized action occurred.

1	LIM Start Action (LIMACTSTART)
	The LIM task started.

2	Operating Mode Change Action (LIMACTOPMODECH)
	The operating mode changed.

3	Main Feed On Action (LIMACTMAINFEED)
	LIM enabled power to the main feed and initialized the SIU.

4	Power On Action (LIMACTPOWERON)
	LIM enabled power to one or more components of the LAT.

5	Power Off Action (LIMACTPOWEROFF)
	LIM disabled power from one or more components of the LAT.

7	Event Fabric Insert Action (LIMACTEVENTINS)
	LIM added one or more components to the event fabric.

8	Event Fabric Remove Action (LIMACTEVENTREM)
	LIM removed one or more components from the event fabric.

9	Load Shed Start Action (LIMACTSHEDBEGIN)
	LIM started disabling instrument power in response to a Load-Shed command.

10	Load Shed End Action (LIMACTSHEDEND)
	LIM finished disabling instrument power in response to a Load-Shed command.

13	LPA Start Action (LIMACTLPASTART)
	LIM sent the LPASTART command to the LPA task.

14	LPA Set Mode Action (LIMACTLPASSETMOD)
	LIM called the LPA_set_mode() function to change the observation mode.

15	LPA Stop Action (LIMACTLPASTOP)
	LIM sent the LPASTOP command to the LPA task.

16	LTC Stop Action (LIMACTLTCSTOP)
	LIM sent the LTCSTOP command to the LTC task.

17	SIU Reboot Action (LIMACTSIUREBOOT)
	LIM is about to reboot the SIU.

19	SAA Configure Action (LIMACTSAACFG)
	LIM configured the LAT instrument for SAA transit.

21	Non-SAA Configure Action (LIMACTNONSAACFG)
	LIM configured the LAT instrument for non-SAA operation.

22	LCI Calibrate Action (LIMACTCALSTART)
	LIM sent the LCICALIBRATE command to the LCI task.

23	LCI Abort Action (LIMACTCALABORT)
	LIM sent the LCIABORT command to the LCI task.

24	LCI Other Command Action (LIMACTCALOTHER)
	LIM sent some 'other' command to the LCI task.

25	Diagnostic Start Action (LIMACTDIAGSTART)
	LIM sent the Diagnostic-Start command to the diagnostic task.

26	Diagnostic Abort Action (LIMACTDIAGABORT)
	LIM sent the Diagnostic-Abort command to the diagnostic task.

27	Diagnostic Other Command Action (LIMACTDIAGOTHER)
	LIM sent some 'other' command to the diagnostic task.

30	LCI Complete Action (LIMACTCALCOMP)
	LIM received the LCICOMPLETE message from the LCI task.

31	Diagnostic Complete Action (LIMACTDIAGCOMP)
	LIM received the Diagnostic-Complete message from the diagnostic task.

32	LPA Complete Action (LIMACTLPACOMP)
	LIM received the LPACOMPLETE message from the LPA task.

33	LCI Task State Change Action (LIMACTLCISTATE)
	LIM changed the state of the LCI task.

34	Diagnostic Task State Change Action (LIMACTLDFSTATE)
	LIM changed the state of the diagnostic task.

35	LPA Task State Change Action (LIMACTLPASTATE)
	LIM changed the state of the LPA task.

37	ARR Mode State Change Action (LIMACTARRSTATE)
	The ARR observation mode state changed.

40	TOO Mode State Change Action (LIMACTTOOSTATE)
	The TOO observation mode state changed.

42	LPA Active Command Action (LIMACTLPAACTIVE)
	LIM sent an 'active' command to the LPA task.

43	LPA Idle Command Action (LIMACTLPAIDLE)
	LIM sent an 'idle' command to the LPA task.

44	Virtual Mode Change Action (LIMACTVIRTMODE)
	The virtual mode changed.

45	SAA State Change Action (LIMACTSAACHANGE)
	The SAA transit state changed.

46	LPA Restart Action (LIMACTLPARESTART)
	LIM called the LPA_resume() function to restart an observation.

47	GBM Repoint Recommend Action (LIMACTREPREC)
	LIM received a Candidate Repoint Recommendation message from the GBM which recommended a repoint.

48	GBM No-Repoint Recommend Action (LIMACTREPNOREC)
	LIM received a Candidate Repoint Recommendation message from the GBM which did not recommend a repoint.

49	GBM Command Forward Action (LIMACTGBMCMD)
	LIM forwarded a command from the GBM to the LPA task.

50	Slew Request Action (LIMACTSLEWREQ)
	LIM sent a Slew-Request command to the spacecraft.

51	Slew Accept Action (LIMACTSLEWACCEPT)
	LIM received a Slew-Request-Reply from the spacecraft which indicated that the request was accepted.

52	Slew Reject Action (LIMACTSLEWREJECT)
	LIM received a Slew-Request-Reply from the spacecraft which indicated that the request was rejected.

53	Primary PID Select Action (LIMACTPIDSELPRI)
	LIM selected the primary PID input signals.

54	Redundant PID Select Action (LIMACTPIDSELRED)
	LIM selected the redundant PID input signals.

55	LIM Stop Action (LIMACTSTOP)
	The LIM task was stopped.

56	ACD Bias Configure Action (LIMACTBIASACD)
	LIM configured the ACD bias voltages.

57	CAL Bias Configure Action (LIMACTBIASCAL)
	LIM configured the CAL bias voltages.

58	TKR Bias Configure Action (LIMACTBIASTKR)
	LIM configured the TKR bias voltages.

59	GBM Interface Configure Action (LIMACTGBMSTATE)
	The configuration of the GBM interface changed.

60	HV Interface Configure Action (LIMACTHVSTATE)
	The configuration of the high-voltage interface changed.

61	LCI Calibrate Status Action (LIMACTCALSTRTST)
	LIM received a status code for an LCICALIBRATE command that it sent to the LCI task.

62	Diagnostic Start Status Action (LIMACTDIAGSTRTST)
	LIM received a status code for a Diagnostic Start command that it sent to the diagnostic task.

63	LPA Start Status Action (LIMACTLPASTARTST)
	LIM received a status code for an LPASTART command that it sent to the LPA task.

64	LCI Abort Status Action (LIMACTCALABRTST)
	LIM received a status code for an LCIABORT command that it sent to the LCI task.

65	Diagnostic Abort Status Action (LIMACTDIAGABRTST)
	LIM received a status code for a Diagnostic Abort command that it sent to the diagnostic task.

66	LPA Stop Status Action (LIMACTLPASTOPST)
	LIM received a status code for an LPASTOP command that it sent to the LPA task.

67	Primary GBM Interrupt Enable Action (LIMACTENGBMPRI)
	LIM enabled the primary GBM trigger interrupt signal.

68	Redundant GBM Interrupt Enable Action (LIMACTENGBMRED)
	LIM enabled the redundant GBM trigger interrupt signal.

69	Primary GBM Interrupt Action (LIMACTGBMINTPRI)
	LIM received an interrupt from the primary GBM trigger interrupt signal.

70	Redundant GBM Interrupt Action (LIMACTGBMINTRED)
	LIM received an interrupt from the redundant GBM trigger interrupt signal.

71	Slew Request Pending Status Action (LIMACTREPREQST)
	The Slew-Request PENDING status changed.

72	GBM Calculate Information Action (LIMACTCALCINFO)
	LIM received a Calculated Information message from the GBM.

73	GBM Closeout Action (LIMACTCLOSEOUT)
	LIM received a Closeout message from the GBM.

74	Primary GBM Interrupt Disable Action (LIMACTDISGBMPRI)
	LIM disabled the primary GBM trigger interrupt signal.

75	Redundant GBM Interrupt Disable Action (LIMACTDISGBMRED)
	LIM disabled the redundant GBM trigger interrupt signal.

76	GRB Suspected Action (LIMACTGRBSUSPECT)
	LIM received a GRB-Suspected message from the LPA task.

77	GRB Confirmed Action (LIMACTGRBCONFIRM)
	LIM received a GRB-Confirmed message from the LPA task.

78	GRB Finished Action (LIMACTGRBFINISH)
	LIM received a GRB-Finished message from the LPA task.

79	LPA GBM Interrupt Action (LIMACTLPAGBMINT)
	LIM called the LPA_gbm_int() function to notify LPA of a GBM interrupt.

Used by:

State