latp.c File Reference

LATp operations. More...

#include "LATC/LATC_msgs.h"
#include "latp_p.h"
#include "data.h"
#include "AG_descriptions_s.h"
#include "AG_lem_s.h"
#include "AG_addr_s.h"
#include "AG_fldEnums_s.h"
#include "AG_regEnums_s.h"
#include "number.ic"
#include "LEM/msg_macros.h"
#include "LEM/list.h"
#include "LEM/decode.h"

Defines

#define NELEM(x) (sizeof x / sizeof x[0])

Functions

static unsigned traverseRead (LATC_imm *imm, LEM_read *lem_r, LATC_type type, unsigned *index, LATC_addr *addr, unsigned depth, const LATC_map *ign)

Traverse the LAT reading the configuration for all nodes.

static unsigned traverseLoad (LATC_imm *imm, LEM_load *lem_l, LATC_type type, unsigned *index, LATC_addr *addr, unsigned depth)

Traverse the LAT reading the configuration for all nodes.

static unsigned loadReg (LEM_load *lem_l, LATC_addr *addr, unsigned reg, unsigned short *ptr)

Load a single register.

static unsigned readReg (LEM_read *lem_r, LATC_addr *addr, unsigned reg, void *dst)

Read a single register.

static void handleReadErrors (unsigned error, unsigned index, void *ptr)

Read error callback routine for LATC.

static unsigned loadSimple (LATC_imm *imm, LEM_load *lem_l, LATC_type type)

Load a generic LAT component.

static unsigned loadSplit (LATC_imm *imm, LEM_load *lem_l, int nLow, int nHigh)

Load the layer splits.

static unsigned loadLayerSplit (LEM_load *lem_l, LATC_addr *addr, short low, short high)

Load the splits for a single layer.

static unsigned loadTracker (LATC_imm *imm, LEM_load *lem_l, LATC_type type)

Load the tracker front ends from the configuration tree.

static unsigned loadCpt (LATC_imm *imm, LEM_load *lem_l, LATC_type type, unsigned index, LATC_addr *addr)

Set all the registers of the target component.

static unsigned readSimple (LATC_imm *imm, LEM_read *lem_r, LATC_type type, const LATC_map *ign)

Read the current configuration for a register type.

static unsigned readSplit (LATC_imm *imm, LEM_read *lem_r, const LATC_map *ign)

Read the current layer splits from the TRC TFE_CNT settings.

static unsigned readTracker (LATC_imm *imm, LEM_read *lem_r, LATC_type type, const LATC_map *ign)

Read the current TFE settings.

static unsigned readCpt (LATC_imm *imm, LEM_read *lem_r, LATC_type type, unsigned index, LATC_addr *addr)

Read all the registers of the current component.

unsigned LATC_read (LATC_imm *imm, LEM_micr *cr, LATC_di *di, const LATC_map *ign)

Read the current configuration of the LAT.

unsigned LATC_load (LATC_imm *imm, LEM_micr *cr)

Load the LAT with the configuration held in imm.

unsigned loadAfeConfig (LATC_imm *imm, unsigned int mask, unsigned int value0, unsigned int value1, unsigned int rcMask, unsigned int feMask, LEM_micr *cr)

Load the AFE configuration register.

unsigned loadCfeConfig0 (LATC_imm *imm, unsigned int mask, unsigned int value, LEM_micr *cr)

Load CFE configuration register 0.

unsigned loadCfeConfig1 (LATC_imm *imm, unsigned int mask, unsigned int value0, unsigned int value1, unsigned int cMask, LEM_micr *cr)

Load CFE configuration register 1.

unsigned loadTkrSplits (LATC_imm *imm, int nLow, int nHigh, LEM_micr *cr)

Load TKR splits values.

unsigned loadTfeDac (LATC_imm *imm, unsigned int mask, unsigned int value, int nLow, int nHigh, LEM_micr *cr)

Load the TFE DAC register.

unsigned setTrigger (LATC_imm *imm, int enable, int marker, LEM_micr *cr)

Enable or disable triggers.

Detailed Description

LATp operations.

Author:: James Swain & Owen Saxton

Id: latp.c,v 1.40 2008/10/24 19:10:13 saxton Exp

Function Documentation

void handleReadErrors	(	unsigned	error,
		unsigned	index,
		void *	ptr
	)			`[static]`

Read error callback routine for LATC.

This routine clears the bit in the LATC_map corresponding to the register that failed to read

Parameters:

	error	Error field from a result item
	index	Index of the command the failed
	ptr	Pointer to the array of LATC_di

References clearBit().

Referenced by LATC_read().

unsigned LATC_load	(	LATC_imm *	imm,
		LEM_micr *	cr
	)

Load the LAT with the configuration held in imm.

Parameters:

	imm	The IMM structure to use as the basis for the load commands sent to the LAT
	cr	Pointer to structure holding multi-item command and response lists (plus some state information)

Return values:

	LATC_SUCCESS	If the LAT is loaded successfully
	LEM_*	If there is an error arising from one of the load commands

References LEM_load::cr, LEM_load::ldfn, loadSimple(), loadSplit(), and loadTracker().

Referenced by LATC_configure().

unsigned LATC_read	(	LATC_imm *	imm,
		LEM_micr *	cr,
		LATC_di *	di,
		const LATC_map *	ign
	)

Read the current configuration of the LAT.

Parameters:

	imm	Pointer to the IMM structure to populate from the LAT
	cr	Pointer to structure holding multi-item command and response lists (plus some state information)
	di	Array of lem_max_ci latc_di objects that capture read errors from the corresponding command items
	ign	Map of the sections of the lat known to be bad or not present so can be ignored.

Return values:

	LATC_SUCCESS	If all goes well - note that individual register reads may fail but the operation as a whole still succeeds.
	LEM_*	An error concerning the queuing of the c/r list individual read command failures are noted in the map associated with the IMM.

References LEM_read::cr, LEM_read::ddfn, LEM_read::di, handleReadErrors(), LEM_read::rdfn, readSimple(), readSplit(), and readTracker().

Referenced by LATC_capture().

unsigned loadAfeConfig	(	LATC_imm *	imm,
		unsigned int	mask,
		unsigned int	value0,
		unsigned int	value1,
		unsigned int	rcMask,
		unsigned int	feMask,
		LEM_micr *	cr
	)

Load the AFE configuration register.

The AFE configuration register is loaded with a modified version of the value from the LAT configuration, with the specified bits replaced.

Parameters:

	imm	Pointer to the cached in-memory model of the LATC registers
	mask	Mask of bits to be changed from the configuration.
	value0	The value to be masked and merged with the configuration value for front-ends not selected by the RC and FE masks.
	value1	The value to be masked and merged with the configuration value for front-ends selected by the RC and FE masks.
	rcMask	Mask of bits, one per RC, specifying which RCs are selected.
	feMask	Mask of bits, one per FE, specifying which FEs within selected RCs are selected.
	cr	Multi-item command-response list used to load the modified registers

Return values:

	LATC_SUCCESS	if all goes well
	LEM_*	if there is an error arising from one of the register load commands

References LATC_addr::acd, checkBit(), LEM_load::cr, ACD_addr::fe, LEM_load::ldfn, loadReg(), and ACD_addr::rc.

Referenced by LATC_loadAfeConfig().

unsigned loadCfeConfig0	(	LATC_imm *	imm,
		unsigned int	mask,
		unsigned int	value,
		LEM_micr *	cr
	)

Load CFE configuration register 0.

CFE configuration register 0 is loaded with a modified version of the value from the LAT configuration, with the specified bits replaced.

Parameters:

	imm	Pointer to the cached in-memory model of the LATC registers
	mask	Mask of bits to be changed from the configuration.
	value	The value to be masked and merged with the configuration value.
	cr	Multi-item command-response list used to load the modified registers

Return values:

	LATC_SUCCESS	if all goes well
	LEM_*	if there is an error arising from one of the register load commands

References TEM_addr::cc, checkBit(), LEM_load::cr, TEM_addr::fe, LEM_load::ldfn, loadReg(), TEM_addr::rc, LATC_addr::tem, and TEM_addr::to.

Referenced by LATC_loadCfeConfig0().

unsigned loadCfeConfig1	(	LATC_imm *	imm,
		unsigned int	mask,
		unsigned int	value0,
		unsigned int	value1,
		unsigned int	cMask,
		LEM_micr *	cr
	)

Load CFE configuration register 1.

CFE configuration register 1 is loaded with a modified version of the value from the LAT configuration, with the specified bits replaced.

Parameters:

	imm	Pointer to the cached in-memory model of the LATC registers
	mask	Mask of bits to be changed from the configuration.
	value0	The value to be masked and merged with the configuration value for front-ends whose bit is clear in the column mask.
	value1	The value to be masked and merged with the configuration value for front-ends whose bit is set in the column mask.
	cMask	Mask of bits, one per column, specifying which value is to be used for loading the config register.
	cr	Multi-item command-response list used to load the modified registers

Return values:

	LATC_SUCCESS	if all goes well
	LEM_*	if there is an error arising from one of the register load commands

References TEM_addr::cc, checkBit(), LEM_load::cr, TEM_addr::fe, LEM_load::ldfn, loadReg(), TEM_addr::rc, LATC_addr::tem, and TEM_addr::to.

Referenced by LATC_loadCfeConfig1().

unsigned loadCpt	(	LATC_imm *	imm,
		LEM_load *	lem_l,
		LATC_type	type,
		unsigned	index,
		LATC_addr *	addr
	)			`[static]`

Set all the registers of the target component.

Parameters:

	imm	IMM structure containing the values to load onto the LAT
	lem_l	Pointer to the command/response lists to use for loading the LAT
	type	Component type
	index	Componenet instance being loaded
	addr	Hierarchical representation of the index (address of the instance)

Return values:

	LATC_SUCCESS	If the LAT is loaded successfully
	LEM_*	If there is an error arising from one of the load commands

References checkBit(), loadReg(), CptDescription::nregs, CptDescription::rd, RegDescription::regId, and CptDescription::width.

Referenced by loadSimple(), loadTracker(), and traverseLoad().

unsigned loadLayerSplit	(	LEM_load *	lem_l,
		LATC_addr *	addr,
		short	low,
		short	high
	)			`[static]`

Load the splits for a single layer.

This routine loads the mode registers on all the TFEs in the layer and sets the split values in the CSRs of the two TRCs in the layer.

Parameters:

	lem_l	Pointer to the command and response lists used for loading the LAT
	addr	Pointer to an address structure used for loading the TFEs and TRC
	low	ID of the highest low talking TFE
	high	ID of the lowest high talking TFE

Return values:

	LATC_SUCCESS	If the LAT is loaded successfully
	LEM_*	If there is an error arising from one of the load commands

References TEM_addr::fe, LATC_addr::layer, LEM_load::ldfn, loadReg(), and LATC_addr::tem.

Referenced by loadSplit().

unsigned loadReg	(	LEM_load *	lem_l,
		LATC_addr *	addr,
		unsigned	reg,
		unsigned short *	ptr
	)			`[static]`

Load a single register.

Parameters:

	lem_l	Pointer to the command/response lists to use for register loads
	addr	Pointer to a LATC_addr address structure
	reg	Register index
	ptr	Pointer to data to be loaded

Return values:

	LATC_SUCCESS	If the LAT is loaded successfully
	LEM_*	If there is an error arising from one of the load commands

References LEM_load::cr, and LEM_load::ldfn.

Referenced by loadAfeConfig(), loadCfeConfig0(), loadCfeConfig1(), loadCpt(), loadLayerSplit(), and loadTfeDac().

unsigned loadSimple	(	LATC_imm *	imm,
		LEM_load *	lem_l,
		LATC_type	type
	)			`[static]`

Load a generic LAT component.

Parameters:

	imm	IMM structure containing the values to load onto the LAT
	lem_l	Pointer to command and response lists used for loading the LAT
	type	Type of LAT component to load

Return values:

	LATC_SUCCESS	If the LAT is loaded successfully
	LEM_*	If there is an error arising from one of the load commands

References LATC_addr::cpt, loadCpt(), and traverseLoad().

Referenced by LATC_load().

unsigned loadSplit	(	LATC_imm *	imm,
		LEM_load *	lem_l,
		int	nLow,
		int	nHigh
	)			`[static]`

Load the layer splits.

Parameters:

	imm	IMM structure containing the values to load onto the LAT
	lem_l	Pointer to the command response lists used for loading the LAT
	nLow	Number of TFEs to talk on the low side, or -1 if the configured values are to be used.
	nHigh	Number of TFEs to talk on the high side, or -1 if the configured values are to be used.

Return values:

	LATC_SUCCESS	If the LAT is loaded successfully
	LEM_*	If there is an error arising from one of the load commands

References checkBit(), Layer_addr::la, LATC_addr::layer, loadLayerSplit(), and Layer_addr::to.

Referenced by LATC_load(), and loadTkrSplits().

unsigned loadTfeDac	(	LATC_imm *	imm,
		unsigned int	mask,
		unsigned int	value,
		int	nLow,
		int	nHigh,
		LEM_micr *	cr
	)

Load the TFE DAC register.

The TFE DAC register is loaded with a modified version of the value from the LAT configuration, with the specified bits replaced.

Parameters:

	imm	Pointer to the cached in-memory model of the LATC registers
	mask	Mask of bits to be changed from the configuration.
	value	The value to be masked and merged with the configuration value.
	nLow	Number of TFEs talking on the low side, or -1 if the configured values are being used.
	nHigh	Number of TFEs talking on the high side, or -1 if the configured values are being used.
	cr	Multi-item command-response list used to load the modified registers

Return values:

	LATC_SUCCESS	if all goes well
	LEM_*	if there is an error arising from one of the register load commands

References checkBit(), LEM_load::cr, Layer_addr::fe, Layer_addr::la, LATC_addr::layer, LEM_load::ldfn, loadReg(), LATC_addr::tem, and Layer_addr::to.

Referenced by LATC_loadTfeDac().

unsigned loadTkrSplits	(	LATC_imm *	imm,
		int	nLow,
		int	nHigh,
		LEM_micr *	cr
	)

Load TKR splits values.

The tracker RC and FE registers are loaded to reflect the given split values.

Parameters:

	imm	Pointer to the cached in-memory model of the LATC registers
	nLow	Number of TFEs to talk on the low side, or -1 if the configured values are to be used.
	nHigh	Number of TFEs to talk on the high side, or -1 if the configured values are to be used.
	cr	Multi-item command-response list used to load the modified registers

Return values:

	LATC_SUCCESS	if all goes well
	LEM_*	if there is an error arising from one of the register load commands

References LEM_load::cr, LEM_load::ldfn, and loadSplit().

Referenced by LATC_loadTkrSplits().

unsigned loadTracker	(	LATC_imm *	imm,
		LEM_load *	lem_l,
		LATC_type	type
	)			`[static]`

Load the tracker front ends from the configuration tree.

Parameters:

	imm	IMM structure containing the values to load onto the LAT
	lem_l	Pointer to the command/response lists used for loading the LAT
	type	Type of component being loaded, either TFE or TDC

Return values:

	LATC_SUCCESS	If the LAT is loaded successfully
	LEM_*	If there is an error arising from one of the load commands

References checkBit(), Layer_addr::fe, Layer_addr::la, LATC_addr::layer, loadCpt(), LATC_addr::tem, and Layer_addr::to.

Referenced by LATC_load().

unsigned readCpt	(	LATC_imm *	imm,
		LEM_read *	lem_r,
		LATC_type	type,
		unsigned	index,
		LATC_addr *	addr
	)			`[static]`

Read all the registers of the current component.

Parameters:

	imm	Pointer to the structure to populate from the LAT register values
	lem_r	Command/response lists to use for the read
	type	Cpt type being read
	index	Instance of the component being read
	addr	Hierarchical representation of the index (address of the instance to read).

Return values:

	LATC_SUCCESS	If all goes well - note that individual register reads may fail but the operation as a whole still succeeds
	LEM_*	An error concerning the queuing of the C/R list individual read command failures are noted in the map associated with the IMM.

References LEM_read::cr, LEM_read::di, LATC_di::index, LATC_di::map, CptDescription::nregs, CptDescription::rd, readReg(), RegDescription::regId, setBit(), LATC_di::type, and CptDescription::width.

Referenced by readSimple(), readTracker(), and traverseRead().

unsigned readReg	(	LEM_read *	lem_r,
		LATC_addr *	addr,
		unsigned	reg,
		void *	dst
	)			`[static]`

Read a single register.

Parameters:

	lem_r	Pointer to command/response lists for reading the LAT registers
	addr	Hierarchical identification of the instance to read
	reg	Identification of the register to read
	dst	Location to place value read from register

Return values:

	LATC_SUCCESS	If all goes well - note that individual register reads may fail but the operation as a whole still succeeds
	LEM_*	An error concerning the queuing of the C/R list individual read command failures are noted in the map associated with the IMM.

References LEM_read::cr, LEM_read::ddfn, and LEM_read::rdfn.

Referenced by readCpt(), and readSplit().

unsigned readSimple	(	LATC_imm *	imm,
		LEM_read *	lem_r,
		LATC_type	type,
		const LATC_map *	ign
	)			`[static]`

Read the current configuration for a register type.

Parameters:

	imm	IMM structure being populated by the read operation
	lem_r	Pointer to the command/response lists and other structures used to read the LAT
	type	Component type to read
	ign	Map of the sections of the LAT known to be bad or not present so can be ignored.

Return values:

	LATC_SUCCESS	If all goes well - note that individual register reads may fail but the operation as a whole still succeeds
	LEM_*	An error concerning the queuing of the C/R list individual read command failures are noted in the map associated with the IMM

References readCpt(), and traverseRead().

Referenced by LATC_read().

unsigned readSplit	(	LATC_imm *	imm,
		LEM_read *	lem_r,
		const LATC_map *	ign
	)			`[static]`

Read the current layer splits from the TRC TFE_CNT settings.

Parameters:

	imm	Pointer to the structure to populate from the LAT register values
	lem_r	Pointer to the command response lists
	ign	Map of the sections of the LAT known to be bad or not present so can be ignored.

Return values:

	LATC_SUCCESS	If all goes well - note that individual register reads may fail but the operation as a whole still succeeds
	LEM_*	An error concerning the queuing of the C/R list individual read command failures are noted in the map associated with the IMM.

References checkBit(), LEM_read::cr, LEM_read::di, LATC_di::index, Layer_addr::la, LATC_addr::layer, LATC_di::map, readReg(), setBit(), LATC_addr::tem, Layer_addr::to, and LATC_di::type.

Referenced by LATC_read().

unsigned readTracker	(	LATC_imm *	imm,
		LEM_read *	lem_r,
		LATC_type	type,
		const LATC_map *	ign
	)			`[static]`

Read the current TFE settings.

Parameters:

	imm	Pointer to the structure to populate from the LAT register values
	lem_r	Pointer to the command/response lists used for reading the LAT
	type	Component type being read (either TFE or TDC)
	ign	Map of the sections of the LAT known to be bad or not present so can be ignored.

Return values:

	LATC_SUCCESS	If all goes well - note that individual register reads may fail but the operation as a whole still succeeds
	LEM_*	An error concerning the queuing of the C/R list individual read command failures are noted in the map associated with the IMM.

References checkBit(), Layer_addr::fe, Layer_addr::la, LATC_addr::layer, readCpt(), LATC_addr::tem, and Layer_addr::to.

Referenced by LATC_read().

unsigned setTrigger	(	LATC_imm *	imm,
		int	enable,
		int	marker,
		LEM_micr *	cr
	)

Enable or disable triggers.

This routine enables or disables LAT triggers. If the marker parameter is non-zero, the LAT is first configured to broadcast a trigger message to all CPUs upon receipt of a solicited trigger, a solicited trigger is issued, and the configuration restored from the IMM data.

Parameters:

	imm	IMM structure containing LAT configuration data
	enable	If non-zero, triggers are anabled; otherwise disabled
	marker	If non-zero, causes a solicited trigger with this value in the event data.
	cr	Pointer to the multi-item command/response list.

Return values:

	LATC_SUCCESS	if all goes well
	LEM_*	if there is an error arising from one of the register load commands

Referenced by LATC_disableTriggers(), and LATC_enableTriggers().

unsigned traverseLoad	(	LATC_imm *	imm,
		LEM_load *	lem_l,
		LATC_type	type,
		unsigned *	index,
		LATC_addr *	addr,
		unsigned	depth
	)			`[static]`

Traverse the LAT reading the configuration for all nodes.

This routine loads the configuration for any instances of the current component whose configuration differs from the default

Parameters:

	imm	IMM structure containing the values to load onto the LAT
	lem_l	Pointer to the command response lists used for loading the LAT
	type	Type of component to load
	index	Pointer to the index of the next instance to load
	addr	Hierarchical representation of the index
	depth	Number of recursive calls to traverse_Load

Return values:

	LATC_SUCCESS	If the LAT is loaded successfully
	LEM_*	If there is an error arising from one of the load commands

References LATC_addr::cpt, and loadCpt().

Referenced by loadSimple().

unsigned traverseRead	(	LATC_imm *	imm,
		LEM_read *	lem_r,
		LATC_type	type,
		unsigned *	index,
		LATC_addr *	addr,
		unsigned	depth,
		const LATC_map *	ign
	)			`[static]`

Traverse the LAT reading the configuration for all nodes.

Parameters:

	imm	Pointer to the structure to populate from the LAT register values
	lem_r	Pointer to the command/response lists used for reading the LAT
	type	The type of component to read
	index	Pointer to a variable tracking the current instance being read
	addr	Pointer to an address structure containing the same information as index, but in heirarchical form
	depth	Number of times this function has been recursively called.
	ign	Map of the sections of the LAT known to be bad or not present so can be ignored.

Return values:

	LATC_SUCCESS	If all goes well - note that individual register reads may fail but the operation as a whole still succeeds
	LEM_*	An error concerning the queuing of the C/R list individual read command failures are noted in the map associated with the IMM.

References checkBit(), LATC_addr::cpt, and readCpt().

Referenced by readSimple().


Defines
#define	NELEM(x) (sizeof x / sizeof x[0])
Functions
static unsigned	traverseRead (LATC_imm imm, LEM_read lem_r, LATC_type type, unsigned index, LATC_addr addr, unsigned depth, const LATC_map *ign)
	Traverse the LAT reading the configuration for all nodes.
static unsigned	traverseLoad (LATC_imm imm, LEM_load lem_l, LATC_type type, unsigned index, LATC_addr addr, unsigned depth)
	Traverse the LAT reading the configuration for all nodes.
static unsigned	loadReg (LEM_load lem_l, LATC_addr addr, unsigned reg, unsigned short *ptr)
	Load a single register.
static unsigned	readReg (LEM_read lem_r, LATC_addr addr, unsigned reg, void *dst)
	Read a single register.
static void	handleReadErrors (unsigned error, unsigned index, void *ptr)
	Read error callback routine for LATC.
static unsigned	loadSimple (LATC_imm imm, LEM_load lem_l, LATC_type type)
	Load a generic LAT component.
static unsigned	loadSplit (LATC_imm imm, LEM_load lem_l, int nLow, int nHigh)
	Load the layer splits.
static unsigned	loadLayerSplit (LEM_load lem_l, LATC_addr addr, short low, short high)
	Load the splits for a single layer.
static unsigned	loadTracker (LATC_imm imm, LEM_load lem_l, LATC_type type)
	Load the tracker front ends from the configuration tree.
static unsigned	loadCpt (LATC_imm imm, LEM_load lem_l, LATC_type type, unsigned index, LATC_addr *addr)
	Set all the registers of the target component.
static unsigned	readSimple (LATC_imm imm, LEM_read lem_r, LATC_type type, const LATC_map *ign)
	Read the current configuration for a register type.
static unsigned	readSplit (LATC_imm imm, LEM_read lem_r, const LATC_map *ign)
	Read the current layer splits from the TRC TFE_CNT settings.
static unsigned	readTracker (LATC_imm imm, LEM_read lem_r, LATC_type type, const LATC_map *ign)
	Read the current TFE settings.
static unsigned	readCpt (LATC_imm imm, LEM_read lem_r, LATC_type type, unsigned index, LATC_addr *addr)
	Read all the registers of the current component.
unsigned	LATC_read (LATC_imm imm, LEM_micr cr, LATC_di di, const LATC_map ign)
	Read the current configuration of the LAT.
unsigned	LATC_load (LATC_imm imm, LEM_micr cr)
	Load the LAT with the configuration held in imm.
unsigned	loadAfeConfig (LATC_imm imm, unsigned int mask, unsigned int value0, unsigned int value1, unsigned int rcMask, unsigned int feMask, LEM_micr cr)
	Load the AFE configuration register.
unsigned	loadCfeConfig0 (LATC_imm imm, unsigned int mask, unsigned int value, LEM_micr cr)
	Load CFE configuration register 0.
unsigned	loadCfeConfig1 (LATC_imm imm, unsigned int mask, unsigned int value0, unsigned int value1, unsigned int cMask, LEM_micr cr)
	Load CFE configuration register 1.
unsigned	loadTkrSplits (LATC_imm imm, int nLow, int nHigh, LEM_micr cr)
	Load TKR splits values.
unsigned	loadTfeDac (LATC_imm imm, unsigned int mask, unsigned int value, int nLow, int nHigh, LEM_micr cr)
	Load the TFE DAC register.
unsigned	setTrigger (LATC_imm imm, int enable, int marker, LEM_micr cr)
	Enable or disable triggers.