---

File List

Here is a list of all documented files with brief descriptions:

TCU_access.c	Implements access to TCU constants
TCU_bitCopy.c	Torturous piece of code to do arbitrary length and order bit copies
TCU_init.c	All the intialization for the TCU package
TCU_loadConfig.c	Implements the loading of a configuration
TCU_loadFE.c	Implements the loading of a front end (FE) TKR chip
TCU_loadFPGA.c	Implements the loading of the (TKR sepcific) FPGA registers
TCU_loadRC.c	Implements the loading of a readout controller (RC) TKR chip
TCU_mappings.c	Implements everything to do with tower mappings
TCU_prvdefs.h	Private include file for the TCU package
TCU_pubdefs.h	Standard public include file for the TCU package
TCU_refreshFPGA.c	Implements the refresh of the FPGA caches
TCU_resetFEsoft.c	Implements a software reset of FE chip(s). This is the FIFO reset
TCU_resetRCsoft.c	Implements a software reset of RC chip(s)
TCU_resetTowerFront.c	Implements the loading of a readout controller (RC) TKR chip
TCU_resetTowerHard.c	Implements the tower hardware reset
TCU_resetTowerPower.c	Implements the reflection of a power cycle
TCU_resetTowerSoft.c	Implements the tower software reset
TCU_setFEDAC.c	Implements the setting of an FE chip DAC
TCU_setFEmask.c	Implements FE chip mask manipulation
TCU_setFEsplit.c	Implements the setting of a split point in a TKR plane readout
TCU_setFEstrip.c	Implements the setting or clearing of a single strip mask bit
TCU_setPlaneEnable.c	Implements the management of the layer-OR TREQ enable bits
TCU_setPlaneEnableBits.c	Implements the management of the layer-OR TREQ enable bits into TIR
TCU_setPlaneMask.c	Implements the management of the layer-OR TREQ masks bits
TCU_setPlaneMaskBits.c	Implements the management of the layer-OR TREQ masks bits
TCU_setTIRenable.c	Implements the management of the TIR trigger enable bits
TCU_setTIRenableBits.c	Implements the management of three-in-a-row (TIR) trigger enable bits

---