add time tagger and weighted buffer
timing is pretty bad, WNS=136 ps - use only for testing+development
timing will probably improve after updates to tProc and generator IPs

QICK running on RFSoC4x2, software version 0.2.360

Firmware configuration (built Tue Aug 19 17:06:48 2025):

	Global clocks (MHz): tProc dispatcher timing 614.400, RF reference 491.520
	Groups of related clocks: [tProc core clock, tProc timing clock, DAC tile 0, DAC tile 2], [ADC tile 0, ADC tile 2]

	2 signal generator channels:
	0:	axis_signal_gen_v6 - fs=9830.400 Msps, fabric=614.400 MHz
		envelope memory: 65536 complex samples (6.667 us)
		32-bit DDS, range=9830.400 MHz
		DAC tile 0, blk 0 is DAC_B
	1:	axis_signal_gen_v6 - fs=9830.400 Msps, fabric=614.400 MHz
		envelope memory: 65536 complex samples (6.667 us)
		32-bit DDS, range=9830.400 MHz
		DAC tile 2, blk 0 is DAC_A

	3 readout channels:
	0:	axis_dyn_readout_v1 - configured by tProc output 2
		fs=4423.680 Msps, decimated=552.960 MHz, 32-bit DDS, range=4423.680 MHz
		axis_avg_buffer v1.2 (has edge counter, no weights)
		memory 16384 accumulated, 16384 decimated (29.630 us)
		triggered by tport 0, pin 0, feedback to tProc input 0
		ADC tile 0, blk 0 is ADC_D
	1:	axis_dyn_readout_v1 - configured by tProc output 3
		fs=4423.680 Msps, decimated=552.960 MHz, 32-bit DDS, range=4423.680 MHz
		axis_avg_buffer v1.2 (has edge counter, no weights)
		memory 16384 accumulated, 16384 decimated (29.630 us)
		triggered by tport 1, pin 0, feedback to tProc input 1
		ADC tile 0, blk 2 is ADC_C
	2:	axis_dyn_readout_v1 - configured by tProc output 4
		fs=4423.680 Msps, decimated=552.960 MHz, 32-bit DDS, range=4423.680 MHz
		axis_weighted_buffer v1.3 (has edge counter, has weights)
		memory 16384 accumulated, 16384 decimated (29.630 us), 4096 weights (7.407 us)
		triggered by tport 12, pin 0, feedback to tProc input 2
		ADC tile 2, blk 0 is ADC_B

	8 digital output pins:
	0:	PMOD0_0
	1:	PMOD0_1
	2:	PMOD0_2
	3:	PMOD0_3
	4:	PMOD0_4
	5:	PMOD0_5
	6:	PMOD0_6
	7:	PMOD0_7

	tProc: qick_processor ("v2") rev 26, core execution clock 204.800 MHz
		memories (words): program 4096, data 16384, waveform 1024
		external start pin: PMOD1_0
		external stop pin: None

	DDR4 memory buffer: 1073741824 samples (1.942 sec), 256 samples/transfer
		wired to readouts [0, 1, 2]

	MR buffer: 8192 samples (1.852 us), wired to readouts [0, 1, 2]