QICK running on ZCU111, software version 0.2.360

Firmware configuration (built Mon Aug 11 15:28:20 2025):

	Global clocks (MHz): tProc dispatcher timing 409.600, RF reference 204.800
	Groups of related clocks: [tProc timing clock, DAC tile 0], [ADC tile 1]

	1 signal generator channels:
	0:	axis_sg_int4_v2 - fs=6553.600 Msps, fabric=409.600 MHz
		envelope memory: 1024 complex samples (2.500 us)
		32-bit DDS, range=1638.400 MHz
		DAC tile 0, blk 0 is DAC228_T0_CH0, or RF board DAC port 0

	0 readout channels:

	2 time-tagger blocks:
	0:	qick_time_tagger
		supports 4-bit interpolation
		memories: 262144 time-tags (TAG), 1024 counts (ARM), 524288 samples (SMP)
		triggered by tport 4, pin 0
		is tProc peripheral A
		1 ADC ports:
		  0_0: ADC tile 1, blk 0 is ADC225_T1_CH0, or RF board ADC AC port 2
	1:	qick_time_tagger
		supports 4-bit interpolation
		memories: 262144 time-tags (TAG), 1024 counts (ARM), 524288 samples (SMP)
		triggered by tport 5, pin 0
		is tProc peripheral B
		1 ADC ports:
		  1_0: ADC tile 1, blk 2 is ADC225_T1_CH1, or RF board ADC AC port 3

	8 digital output pins:
	0:	PMOD0_0
	1:	PMOD0_1
	2:	PMOD0_2
	3:	PMOD0_3
	4:	PMOD0_4
	5:	PMOD0_5
	6:	PMOD0_6
	7:	PMOD0_7

	tProc: qick_processor ("v2") rev 26, core execution clock 100.000 MHz
		memories (words): program 256, data 256, waveform 256
		external start pin: None
		external stop pin: None