test new mixmux8
timing is not great (worst negative slack ~110 ps)

QICK running on ZCU216, software version 0.2.273

Firmware configuration (built Mon Aug  5 15:06:11 2024):

	Global clocks (MHz): tProcessor 614.400, RF reference 245.760

	5 signal generator channels:
	0:	axis_signal_gen_v6 - envelope memory 16384 samples (1.667 us)
		fs=9830.400 MHz, fabric=614.400 MHz, 32-bit DDS, range=9830.400 MHz
		DAC tile 2, blk 0 is 0_230, on JHC3
	1:	axis_sg_mux8_v1 - envelope memory 0 samples (0.000 us)
		fs=9830.400 MHz, fabric=614.400 MHz, 32-bit DDS, range=9830.400 MHz
		DAC tile 2, blk 2 is 2_230, on JHC3
	2:	axis_sg_int4_v1 - envelope memory 4096 samples (9.524 us)
		fs=6881.280 MHz, fabric=430.080 MHz, 16-bit DDS, range=1720.320 MHz
		DAC tile 3, blk 0 is 0_231, on JHC3
	3:	axis_sg_int4_v1 - envelope memory 4096 samples (9.524 us)
		fs=6881.280 MHz, fabric=430.080 MHz, 16-bit DDS, range=1720.320 MHz
		DAC tile 3, blk 1 is 1_231, on JHC4
	4:	axis_sg_mixmux8_v1 - envelope memory 0 samples (0.000 us)
		fs=6881.280 MHz, fabric=430.080 MHz, 32-bit DDS, range=1720.320 MHz
		DAC tile 3, blk 2 is 2_231, on JHC3

	7 readout channels:
	0:	axis_dyn_readout_v1 - configured by tProc output 5
		fs=2457.600 MHz, decimated=307.200 MHz, 32-bit DDS, range=2457.600 MHz
		maxlen 16384 accumulated, 1024 decimated (3.333 us)
		triggered by tport 0, pin 0, feedback to tProc input 0
		ADC tile 2, blk 0 is 0_226, on JHC7
	1:	axis_readout_v3 - configured by tProc output 6
		fs=2457.600 MHz, decimated=614.400 MHz, 32-bit DDS, range=2457.600 MHz
		maxlen 16384 accumulated, 1024 decimated (1.667 us)
		triggered by tport 1, pin 0, feedback to tProc input 1
		ADC tile 2, blk 1 is 1_226, on JHC8
	2:	axis_pfb_readout_v3 - configured by PYNQ
		fs=2457.600 MHz, decimated=38.400 MHz, 32-bit DDS, range=38.400 MHz
		maxlen 16384 accumulated, 1024 decimated (26.667 us)
		triggered by tport 2, pin 0, feedback to tProc input 2
		ADC tile 2, blk 2 is 2_226, on JHC7
	3:	axis_pfb_readout_v3 - configured by PYNQ
		fs=2457.600 MHz, decimated=38.400 MHz, 32-bit DDS, range=38.400 MHz
		maxlen 16384 accumulated, 1024 decimated (26.667 us)
		triggered by tport 3, pin 0, feedback to tProc input 3
		ADC tile 2, blk 2 is 2_226, on JHC7
	4:	axis_pfb_readout_v3 - configured by PYNQ
		fs=2457.600 MHz, decimated=38.400 MHz, 32-bit DDS, range=38.400 MHz
		maxlen 16384 accumulated, 1024 decimated (26.667 us)
		triggered by tport 4, pin 0, feedback to tProc input 4
		ADC tile 2, blk 2 is 2_226, on JHC7
	5:	axis_pfb_readout_v3 - configured by PYNQ
		fs=2457.600 MHz, decimated=38.400 MHz, 32-bit DDS, range=38.400 MHz
		maxlen 16384 accumulated, 1024 decimated (26.667 us)
		triggered by tport 5, pin 0, feedback to tProc input 5
		ADC tile 2, blk 2 is 2_226, on JHC7
	6:	axis_readout_v2 - configured by PYNQ
		fs=2457.600 MHz, decimated=307.200 MHz, 32-bit DDS, range=2457.600 MHz
		maxlen 16384 accumulated, 1024 decimated (3.333 us)
		triggered by tport 6, pin 0, feedback to tProc input 6
		ADC tile 2, blk 3 is 3_226, on JHC8

	8 digital output pins:
	0:	PMOD0_0_LS
	1:	PMOD0_1_LS
	2:	PMOD0_2_LS
	3:	PMOD0_3_LS
	4:	PMOD0_4_LS
	5:	PMOD0_5_LS
	6:	PMOD0_6_LS
	7:	PMOD0_7_LS

	tProc qick_processor ("v2") rev 20: program memory 1024 words, data memory 1024 words
		external start pin: None

	DDR4 memory buffer: 1073741824 samples (3.495 sec), 128 samples/transfer
		wired to readouts [0, 2, 3, 4, 5, 6]

	MR buffer: 8192 samples (3.333 us), wired to readouts [0, 6]