QICK configuration:

	Board: ZCU111

	Software version: 0.2.267
	Firmware timestamp: Thu Jun 20 20:31:43 2024

	Global clocks (MHz): tProcessor 409.600, RF reference 204.800

	4 signal generator channels:
	0:	axis_signal_gen_v6 - envelope memory 65536 samples (10.000 us)
		fs=6553.600 MHz, fabric=409.600 MHz, 32-bit DDS, range=6553.600 MHz
		DAC tile 0, blk 0 is DAC228_T0_CH0 or RF board output 0
	1:	axis_signal_gen_v6 - envelope memory 65536 samples (10.000 us)
		fs=6553.600 MHz, fabric=409.600 MHz, 32-bit DDS, range=6553.600 MHz
		DAC tile 0, blk 1 is DAC228_T0_CH1 or RF board output 1
	2:	axis_signal_gen_v6 - envelope memory 65536 samples (10.000 us)
		fs=6553.600 MHz, fabric=409.600 MHz, 32-bit DDS, range=6553.600 MHz
		DAC tile 0, blk 2 is DAC228_T0_CH2 or RF board output 2
	3:	axis_signal_gen_v6 - envelope memory 65536 samples (10.000 us)
		fs=6553.600 MHz, fabric=409.600 MHz, 32-bit DDS, range=6553.600 MHz
		DAC tile 0, blk 3 is DAC228_T0_CH3 or RF board output 3

	0 readout channels:

	8 digital output pins:
	0:	PMOD0_0
	1:	PMOD0_1
	2:	PMOD0_2
	3:	PMOD0_3
	4:	PMOD0_4
	5:	PMOD0_5
	6:	PMOD0_6
	7:	PMOD0_7

	tProc qick_processor ("v2") rev 20: program memory 256 words, data memory 256 words
		external start pin: None