QICK running on ZCU111, software version 0.2.381

Firmware configuration (built Mon Dec 15 14:17:10 2025):

    Global clocks (MHz): tProc dispatcher timing 384.000, RF reference 204.800
    Groups of related clocks: [tProc clock, DAC tile 0, DAC tile 1], [ADC tile 0]

    DAC output power mode: 20mA

    7 signal generator channels:
    0:  axis_signal_gen_v6 - fs=6144.000 Msps, fabric=384.000 MHz
        envelope memory: 65536 complex samples (10.667 us)
        32-bit DDS, range=6144.000 MHz
        DAC tile 0, blk 0 is DAC228_T0_CH0, or RF board DAC port 0
    1:  axis_signal_gen_v6 - fs=6144.000 Msps, fabric=384.000 MHz
        envelope memory: 65536 complex samples (10.667 us)
        32-bit DDS, range=6144.000 MHz
        DAC tile 0, blk 1 is DAC228_T0_CH1, or RF board DAC port 1
    2:  axis_signal_gen_v6 - fs=6144.000 Msps, fabric=384.000 MHz
        envelope memory: 65536 complex samples (10.667 us)
        32-bit DDS, range=6144.000 MHz
        DAC tile 0, blk 2 is DAC228_T0_CH2, or RF board DAC port 2
    3:  axis_signal_gen_v6 - fs=6144.000 Msps, fabric=384.000 MHz
        envelope memory: 65536 complex samples (10.667 us)
        32-bit DDS, range=6144.000 MHz
        DAC tile 1, blk 0 is DAC229_T1_CH0, or RF board DAC port 4
    4:  axis_signal_gen_v6 - fs=6144.000 Msps, fabric=384.000 MHz
        envelope memory: 65536 complex samples (10.667 us)
        32-bit DDS, range=6144.000 MHz
        DAC tile 1, blk 1 is DAC229_T1_CH1, or RF board DAC port 5
    5:  axis_signal_gen_v6 - fs=6144.000 Msps, fabric=384.000 MHz
        envelope memory: 65536 complex samples (10.667 us)
        32-bit DDS, range=6144.000 MHz
        DAC tile 1, blk 2 is DAC229_T1_CH2, or RF board DAC port 6
    6:  axis_signal_gen_v6 - fs=6144.000 Msps, fabric=384.000 MHz
        envelope memory: 65536 complex samples (10.667 us)
        32-bit DDS, range=6144.000 MHz
        DAC tile 1, blk 3 is DAC229_T1_CH3, or RF board DAC port 7

    2 readout channels:
    0:  axis_readout_v2 - configured by PYNQ
        fs=4096.000 Msps, decimated=512.000 MHz, 32-bit DDS, range=4096.000 MHz
        axis_avg_buffer v1.2 (has edge counter, no weights)
        memory 16384 accumulated, 4096 decimated (8.000 us)
        triggered by output 0, pin 14, feedback to tProc input 0
        ADC tile 0, blk 0 is ADC224_T0_CH0, or RF board ADC AC port 0
    1:  axis_readout_v2 - configured by PYNQ
        fs=4096.000 Msps, decimated=512.000 MHz, 32-bit DDS, range=4096.000 MHz
        axis_avg_buffer v1.2 (has edge counter, no weights)
        memory 16384 accumulated, 4096 decimated (8.000 us)
        triggered by output 0, pin 15, feedback to tProc input 1
        ADC tile 0, blk 2 is ADC224_T0_CH1, or RF board ADC AC port 1

    8 digital output pins:
    0:  PMOD0_0_LS
    1:  PMOD0_1_LS
    2:  PMOD0_2_LS
    3:  PMOD0_3_LS
    4:  PMOD0_4_LS
    5:  PMOD0_5_LS
    6:  PMOD0_6_LS
    7:  PMOD0_7_LS

    tProc: axis_tproc64x32_x8 ("v1") rev 4, program memory 8192 words, data memory 4096 words
        external start pin: PMOD1_0_LS

    DDR4 memory buffer: 1073741824 samples (2.097 sec), 256 samples/transfer
        wired to readouts [0, 1]

    MR buffer: 8192 samples (2.000 us), wired to readouts [0, 1]