Information about the automated initialisation success:
At least one error occured during the initialization phase that was probably caused  by the ARC board. 
Init_ARC.vi Error  5037:Memory Test failed !
Init_ARC.vi Error 5061:PCF Chip for hybrid 1 can not be accessed
Init_ARC.vi Error 5062:PCF Chip for hybrid 2 can not be accessed
Init_ARC.vi Error 5063:PCF Chip for lv can not be accessed
Init_ARC.vi Error 5060:LV is not accessible !
call_dll_initI2C.vi Error 5018:Phillips I2C Chip PCF8584 is not accessible !
call_dll_initI2C.vi Error 5018:Phillips I2C Chip PCF8584 is not accessible !
_________________________
At least one error occured during the initialization of the hybrid or module at the hybrid port 1
Init_ARC.vi
while scanning for APVs
on hybrid port 1 Error 5065:No I2C address of an APV found !
_________________________

No addresses of HYBRID 1 found ! 
The Hybrid ID is: 
LED Controller assigned: 000000010
HV Board assigned: NONE
at HV Channel :HV 1

_________________________
At least one error occured during the initialization of the hybrid or module at the hybrid port 2
Init_ARC.vi
while scanning for APVs
on hybrid port 2 Error 5065:No I2C address of an APV found !
_________________________

No addresses of HYBRID 2 found ! 
The Hybrid ID is: 
LED Controller assigned: NONE
HV Board assigned: NONE
at HV Channel :HV 2

_________________________