Known simplifications in ACD geometry
- Curve and outer vertical volume of top tiles in columns 0 and
4 is ignored. Instead, xml description simply has a box of thickness
(z-dimension) 10 mm and x-extent = true x-extent of 355 mm.
One could add an additional box for each such tile which would more
or less be the projection of the vertical volume onto a plane perpendicular
to the x-axis. The geometry would be simple enough to add, but we'd
also need to add another field to tile identifiers for "segment" since
some tiles would now consist of two pieces.
- Slant in side tiles is ignored. All side tiles in a given face will
be aligned in the same plane, perpendicular to either x- or y-axis, depending
on face. Vertical dimensions will be adjusted for
the two middle rows so that there is no overlap but also no gap.
- Face sheets for the top and side supports will have the same long
(non-thickness) dimensions as the corresponding core volumes, even though
the 3-d model shows small differences.
- Ribbons which "measure X" (in a plane perp. to X axis) will be modeled
as 3 segments: one along the top face and one along each of the sides
perp. to the Y-axis. Ribbons which measure Y will be modeled as 7 pieces:
one for each affected side and 5 across the top, since different parts
of these ribbons are at different Z.
- The only components included in this draft of the model will be:
- The 89 tiles
- The 8 ribbons, segmented as described above
- Top and side supports, each consisting of a core volume and two
face sheets.
Back to
GLAST Software Home
J. Bogart
Last modified: