.\"  Creator: dot version 1.10 (Wed Oct 29 15:31:07 CST 2003)
.\"  For: (fsw-web) Kim Lo
.\"  Title: G
.\"  save point size and font
.nr .S \n(.s
.nr DF \n(.f
.PS 2.25000 1.13889
# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
.nr SF 2250
scalethickness = 2250
# don't change anything below this line in this drawing
# non-fatal run-time pic version determination, version 2
boxrad=2.0 # will be reset to 0.0 by gpic only
scale=1.0 # required for comparisons
# boxrad is now 0.0 in gpic, else it remains 2.0
# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
# DWB 2 doesn't use fill and doesn't define fillval
# reset works in gpic and 10th edition, but isn't defined in DWB 2
# DWB 2 compatibility definitions
if boxrad > 1.0 && dashwid < 0.075 then X
	fillval = 1;
	define fill Y Y;
	define solid Y Y;
	define reset Y scale=1.0 Y;
X
reset # set to known state
# GNU pic vs. 10th Edition d\(e'tente
if fillval > 0.4 then X
	define setfillval Y fillval = 1 - Y;
	define bold Y thickness 2 Y;
	# if you use gpic and it barfs on encountering "solid",
	#	install a more recent version of gpic or switch to DWB or 10th Edition pic;
	#	sorry, the groff folks changed gpic; send any complaint to them;
X else Z
	define setfillval Y fillval = Y;
	define bold Y Y;
	define filled Y fill Y;
Z
# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
arrowhead = 7 # not used by graphviz
# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
boxrad = 0 # no rounded corners in graphviz
# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
linethick = 0; oldlinethick = linethick
# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
maxpsht = 1.138889
maxpswid = 2.250000
Dot: [
define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
setfillval 0.000000
setfillval 0.000000
.ft R 
.ps 7*\n(SFu/2250u
#	LLFSSYSCHECK
{
define attrs1 % %
define attrs1 % filled %
setfillval 0.666667
setfillval 0.666667
box attrs1 fill wid 0.97222 ht 0.25000 at (0.59722,0.56944);
{
define attrs2 % %
setfillval 0.000000
"LLFSSYSCHECK" at (0.60417,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	FILEID
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.76389,1.01389);
{
define attrs2 % %
setfillval 0.000000
"FILEID" at (1.76389,1.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLFSSYSCHECK -> FILEID
{
define attrs1 % %
define attrs1 % bold %
P0: (0.93056,0.69444)
P1: (0.96468,0.71072)
P2: (1.00022,0.72633)
P3: (1.03693,0.74144)
P4: (1.07456,0.75622)
P5: (1.11285,0.77083)
P6: (1.15156,0.78544)
P7: (1.19043,0.80022)
P8: (1.22922,0.81533)
P9: (1.26768,0.83094)
P10: (1.30556,0.84722)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2250
P0: (1.29167,0.87500)
P1: (1.43056,0.88889)
P2: (1.30556,0.80556)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LATUNIT
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.76389,0.56944);
{
define attrs2 % %
setfillval 0.000000
"LATUNIT" at (1.76389,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLFSSYSCHECK -> LATUNIT
{
define attrs1 % %
define attrs1 % bold %
P0: (1.08333,0.56944)
P1: (1.10000,0.56944)
P2: (1.11667,0.56944)
P3: (1.13333,0.56944)
P4: (1.15000,0.56944)
P5: (1.16667,0.56944)
P6: (1.18333,0.56944)
P7: (1.20000,0.56944)
P8: (1.21667,0.56944)
P9: (1.23333,0.56944)
P10: (1.25000,0.56944)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2250
P0: (1.25000,0.61111)
P1: (1.38889,0.56944)
P2: (1.25000,0.54167)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	PAD16
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.76389,0.12500);
{
define attrs2 % %
setfillval 0.000000
"PAD16" at (1.77083,0.11574);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLFSSYSCHECK -> PAD16
{
define attrs1 % %
define attrs1 % bold %
P0: (0.93056,0.44444)
P1: (0.96468,0.42817)
P2: (1.00022,0.41256)
P3: (1.03693,0.39744)
P4: (1.07456,0.38267)
P5: (1.11285,0.36806)
P6: (1.15156,0.35344)
P7: (1.19043,0.33867)
P8: (1.22922,0.32356)
P9: (1.26768,0.30794)
P10: (1.30556,0.29167)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2250
P0: (1.30556,0.33333)
P1: (1.43056,0.25000)
P2: (1.29167,0.26389)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
]
.PE
.\"  restore point size and font
.ps \n(.S
.ft \n(DF