.\"  Creator: dot version 1.10 (Wed Oct 29 15:31:07 CST 2003)
.\"  For: (fsw-web) Kim Lo
.\"  Title: G
.\"  save point size and font
.nr .S \n(.s
.nr DF \n(.f
.PS 2.02778 2.47222
# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
.nr SF 2028
scalethickness = 2028
# don't change anything below this line in this drawing
# non-fatal run-time pic version determination, version 2
boxrad=2.0 # will be reset to 0.0 by gpic only
scale=1.0 # required for comparisons
# boxrad is now 0.0 in gpic, else it remains 2.0
# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
# DWB 2 doesn't use fill and doesn't define fillval
# reset works in gpic and 10th edition, but isn't defined in DWB 2
# DWB 2 compatibility definitions
if boxrad > 1.0 && dashwid < 0.075 then X
	fillval = 1;
	define fill Y Y;
	define solid Y Y;
	define reset Y scale=1.0 Y;
X
reset # set to known state
# GNU pic vs. 10th Edition d\(e'tente
if fillval > 0.4 then X
	define setfillval Y fillval = 1 - Y;
	define bold Y thickness 2 Y;
	# if you use gpic and it barfs on encountering "solid",
	#	install a more recent version of gpic or switch to DWB or 10th Edition pic;
	#	sorry, the groff folks changed gpic; send any complaint to them;
X else Z
	define setfillval Y fillval = Y;
	define bold Y Y;
	define filled Y fill Y;
Z
# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
arrowhead = 7 # not used by graphviz
# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
boxrad = 0 # no rounded corners in graphviz
# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
linethick = 0; oldlinethick = linethick
# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
maxpsht = 2.472222
maxpswid = 2.027778
Dot: [
define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
setfillval 0.000000
setfillval 0.000000
.ft R 
.ps 7*\n(SFu/2028u
#	LimitADC
{
define attrs1 % %
define attrs1 % filled %
setfillval 0.666667
setfillval 0.666667
box attrs1 fill wid 0.75000 ht 0.25000 at (0.48611,1.23611);
{
define attrs2 % %
setfillval 0.000000
"LimitADC" at (0.49306,1.22685);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	ACTION
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,2.34722);
{
define attrs2 % %
setfillval 0.000000
"ACTION" at (1.54167,2.33796);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LimitADC -> ACTION
{
define attrs1 % %
define attrs1 % bold %
P0: (0.56944,1.36111)
P1: (0.60642,1.42000)
P2: (0.65022,1.48722)
P3: (0.70019,1.56111)
P4: (0.75567,1.64000)
P5: (0.81597,1.72222)
P6: (0.88044,1.80611)
P7: (0.94842,1.89000)
P8: (1.01922,1.97222)
P9: (1.09219,2.05111)
P10: (1.16667,2.12500)
P11: (1.17044,2.12539)
P12: (1.17356,2.12644)
P13: (1.17617,2.12800)
P14: (1.17844,2.12989)
P15: (1.18056,2.13194)
P16: (1.18267,2.13400)
P17: (1.18494,2.13589)
P18: (1.18756,2.13744)
P19: (1.19067,2.13850)
P20: (1.19444,2.13889)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2028
P0: (1.18056,2.16667)
P1: (1.30556,2.22222)
P2: (1.22222,2.11111)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	ADX
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,1.90278);
{
define attrs2 % %
setfillval 0.000000
"ADX" at (1.54861,1.89352);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LimitADC -> ADX
{
define attrs1 % %
define attrs1 % bold %
P0: (0.68056,1.36111)
P1: (0.72004,1.38731)
P2: (0.76311,1.41567)
P3: (0.80918,1.44586)
P4: (0.85767,1.47756)
P5: (0.90799,1.51042)
P6: (0.95956,1.54411)
P7: (1.01179,1.57831)
P8: (1.06411,1.61267)
P9: (1.11593,1.64686)
P10: (1.16667,1.68056)
P11: (1.17083,1.68433)
P12: (1.17500,1.68744)
P13: (1.17917,1.69006)
P14: (1.18333,1.69233)
P15: (1.18750,1.69444)
P16: (1.19167,1.69656)
P17: (1.19583,1.69883)
P18: (1.20000,1.70144)
P19: (1.20417,1.70456)
P20: (1.20833,1.70833)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2028
P0: (1.19444,1.73611)
P1: (1.33333,1.77778)
P2: (1.22222,1.68056)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	DELTA
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,1.45833);
{
define attrs2 % %
setfillval 0.000000
"DELTA" at (1.54167,1.44907);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LimitADC -> DELTA
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,1.31944)
P1: (0.87778,1.32322)
P2: (0.89444,1.32633)
P3: (0.91111,1.32894)
P4: (0.92778,1.33122)
P5: (0.94444,1.33333)
P6: (0.96111,1.33544)
P7: (0.97778,1.33772)
P8: (0.99444,1.34033)
P9: (1.01111,1.34344)
P10: (1.02778,1.34722)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2028
P0: (1.02778,1.37500)
P1: (1.16667,1.37500)
P2: (1.04167,1.31944)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	ENABLE
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,1.01389);
{
define attrs2 % %
setfillval 0.000000
"ENABLE" at (1.54861,1.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LimitADC -> ENABLE
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,1.15278)
P1: (0.87778,1.14900)
P2: (0.89444,1.14589)
P3: (0.91111,1.14328)
P4: (0.92778,1.14100)
P5: (0.94444,1.13889)
P6: (0.96111,1.13678)
P7: (0.97778,1.13450)
P8: (0.99444,1.13189)
P9: (1.01111,1.12878)
P10: (1.02778,1.12500)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2028
P0: (1.04167,1.15278)
P1: (1.16667,1.09722)
P2: (1.02778,1.09722)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LIMIT
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,0.56944);
{
define attrs2 % %
setfillval 0.000000
"LIMIT" at (1.54861,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LimitADC -> LIMIT
{
define attrs1 % %
define attrs1 % bold %
P0: (0.66667,1.11111)
P1: (0.70992,1.08117)
P2: (0.75600,1.04989)
P3: (0.80442,1.01761)
P4: (0.85467,0.98467)
P5: (0.90625,0.95139)
P6: (0.95867,0.91811)
P7: (1.01142,0.88517)
P8: (1.06400,0.85289)
P9: (1.11592,0.82161)
P10: (1.16667,0.79167)
P11: (1.17083,0.79126)
P12: (1.17500,0.79011)
P13: (1.17917,0.78829)
P14: (1.18333,0.78589)
P15: (1.18750,0.78299)
P16: (1.19167,0.77967)
P17: (1.19583,0.77601)
P18: (1.20000,0.77211)
P19: (1.20417,0.76804)
P20: (1.20833,0.76389)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2028
P0: (1.22222,0.79167)
P1: (1.31944,0.69444)
P2: (1.18056,0.73611)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	PAD16
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,0.12500);
{
define attrs2 % %
setfillval 0.000000
"PAD16" at (1.54861,0.11574);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LimitADC -> PAD16
{
define attrs1 % %
define attrs1 % bold %
P0: (0.56944,1.11111)
P1: (0.60642,1.04847)
P2: (0.65022,0.97833)
P3: (0.70019,0.90236)
P4: (0.75567,0.82222)
P5: (0.81597,0.73958)
P6: (0.88044,0.65611)
P7: (0.94842,0.57347)
P8: (1.01922,0.49333)
P9: (1.09219,0.41736)
P10: (1.16667,0.34722)
P11: (1.16706,0.34683)
P12: (1.16811,0.34578)
P13: (1.16967,0.34422)
P14: (1.17156,0.34233)
P15: (1.17361,0.34028)
P16: (1.17567,0.33822)
P17: (1.17756,0.33633)
P18: (1.17911,0.33478)
P19: (1.18017,0.33372)
P20: (1.18056,0.33333)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2028
P0: (1.20833,0.36111)
P1: (1.29167,0.25000)
P2: (1.16667,0.30556)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
]
.PE
.\"  restore point size and font
.ps \n(.S
.ft \n(DF