.\"  Creator: dot version 1.10 (Wed Oct 29 15:31:07 CST 2003)
.\"  For: (fsw-web) Kim Lo
.\"  Title: G
.\"  save point size and font
.nr .S \n(.s
.nr DF \n(.f
.PS 3.22222 3.80556
# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
.nr SF 3222
scalethickness = 3222
# don't change anything below this line in this drawing
# non-fatal run-time pic version determination, version 2
boxrad=2.0 # will be reset to 0.0 by gpic only
scale=1.0 # required for comparisons
# boxrad is now 0.0 in gpic, else it remains 2.0
# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
# DWB 2 doesn't use fill and doesn't define fillval
# reset works in gpic and 10th edition, but isn't defined in DWB 2
# DWB 2 compatibility definitions
if boxrad > 1.0 && dashwid < 0.075 then X
	fillval = 1;
	define fill Y Y;
	define solid Y Y;
	define reset Y scale=1.0 Y;
X
reset # set to known state
# GNU pic vs. 10th Edition d\(e'tente
if fillval > 0.4 then X
	define setfillval Y fillval = 1 - Y;
	define bold Y thickness 2 Y;
	# if you use gpic and it barfs on encountering "solid",
	#	install a more recent version of gpic or switch to DWB or 10th Edition pic;
	#	sorry, the groff folks changed gpic; send any complaint to them;
X else Z
	define setfillval Y fillval = Y;
	define bold Y Y;
	define filled Y fill Y;
Z
# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
arrowhead = 7 # not used by graphviz
# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
boxrad = 0 # no rounded corners in graphviz
# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
linethick = 0; oldlinethick = linethick
# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
maxpsht = 3.805556
maxpswid = 3.222222
Dot: [
define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
setfillval 0.000000
setfillval 0.000000
.ft R 
.ps 7*\n(SFu/3222u
#	DiagTrcSiu
{
define attrs1 % %
define attrs1 % filled %
setfillval 0.666667
setfillval 0.666667
box attrs1 fill wid 0.75000 ht 0.25000 at (0.48611,1.01389);
{
define attrs2 % %
setfillval 0.000000
"DiagTrcSiu" at (0.49306,1.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS
{
define attrs1 % %
define attrs1 % filled %
setfillval 0.831373
setfillval 0.831373
box attrs1 fill wid 0.75000 ht 0.25000 at (1.54167,1.90278);
{
define attrs2 % %
setfillval 0.000000
"TRCTOPS" at (1.54861,1.89352);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	DiagTrcSiu -> TRCTOPS
{
define attrs1 % %
define attrs1 % bold %
P0: (0.63889,1.13889)
P1: (0.69242,1.18369)
P2: (0.75211,1.23400)
P3: (0.81664,1.28864)
P4: (0.88467,1.34644)
P5: (0.95486,1.40625)
P6: (1.02589,1.46689)
P7: (1.09642,1.52719)
P8: (1.16511,1.58600)
P9: (1.23064,1.64214)
P10: (1.29167,1.69444)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (1.26389,1.70833)
P1: (1.38889,1.77778)
P2: (1.30556,1.66667)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TSP16
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (2.66667,0.12500);
{
define attrs2 % %
setfillval 0.000000
"TSP16" at (2.66667,0.11574);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	DiagTrcSiu -> TSP16
{
define attrs1 % %
define attrs1 % bold %
P0: (0.79167,0.88889)
P1: (0.91160,0.83993)
P2: (1.04444,0.78556)
P3: (1.18729,0.72701)
P4: (1.33722,0.66556)
P5: (1.49132,0.60243)
P6: (1.64667,0.53889)
P7: (1.80035,0.47618)
P8: (1.94944,0.41556)
P9: (2.09104,0.35826)
P10: (2.22222,0.30556)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.25000,0.33333)
P1: (2.36111,0.25000)
P2: (2.22222,0.26389)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	FREQ
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (2.66667,3.68056);
{
define attrs2 % %
setfillval 0.000000
"FREQ" at (2.66667,3.67130);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS -> FREQ
{
define attrs1 % %
define attrs1 % bold %
P0: (1.56944,2.02778)
P1: (1.59035,2.12708)
P2: (1.62000,2.24722)
P3: (1.65882,2.38403)
P4: (1.70722,2.53333)
P5: (1.76562,2.69097)
P6: (1.83444,2.85278)
P7: (1.91410,3.01458)
P8: (2.00500,3.17222)
P9: (2.10757,3.32153)
P10: (2.22222,3.45833)
P11: (2.22261,3.45872)
P12: (2.22367,3.45978)
P13: (2.22522,3.46133)
P14: (2.22711,3.46322)
P15: (2.22917,3.46528)
P16: (2.23122,3.46733)
P17: (2.23311,3.46922)
P18: (2.23467,3.47078)
P19: (2.23572,3.47183)
P20: (2.23611,3.47222)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.22222,3.50000)
P1: (2.34722,3.55556)
P2: (2.26389,3.44444)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	SERIAL
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (2.66667,3.23611);
{
define attrs2 % %
setfillval 0.000000
"SERIAL" at (2.66667,3.22685);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS -> SERIAL
{
define attrs1 % %
define attrs1 % bold %
P0: (1.59722,2.02778)
P1: (1.63010,2.10151)
P2: (1.67022,2.18767)
P3: (1.71735,2.28365)
P4: (1.77122,2.38689)
P5: (1.83160,2.49479)
P6: (1.89822,2.60478)
P7: (1.97085,2.71426)
P8: (2.04922,2.82067)
P9: (2.13310,2.92140)
P10: (2.22222,3.01389)
P11: (2.22600,3.01767)
P12: (2.22911,3.02078)
P13: (2.23172,3.02339)
P14: (2.23400,3.02567)
P15: (2.23611,3.02778)
P16: (2.23822,3.02989)
P17: (2.24050,3.03217)
P18: (2.24311,3.03478)
P19: (2.24622,3.03789)
P20: (2.25000,3.04167)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.22222,3.06944)
P1: (2.36111,3.11111)
P2: (2.26389,3.01389)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCDTIM
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (2.66667,2.79167);
{
define attrs2 % %
setfillval 0.000000
"TRCDTIM" at (2.66667,2.78241);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS -> TRCDTIM
{
define attrs1 % %
define attrs1 % bold %
P0: (1.65278,2.02778)
P1: (1.69310,2.07557)
P2: (1.73867,2.12678)
P3: (1.78890,2.18065)
P4: (1.84322,2.23644)
P5: (1.90104,2.29340)
P6: (1.96178,2.35078)
P7: (2.02485,2.40782)
P8: (2.08967,2.46378)
P9: (2.15565,2.51790)
P10: (2.22222,2.56944)
P11: (2.22639,2.56985)
P12: (2.23056,2.57100)
P13: (2.23472,2.57282)
P14: (2.23889,2.57522)
P15: (2.24306,2.57812)
P16: (2.24722,2.58144)
P17: (2.25139,2.58510)
P18: (2.25556,2.58900)
P19: (2.25972,2.59307)
P20: (2.26389,2.59722)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.23611,2.62500)
P1: (2.37500,2.66667)
P2: (2.27778,2.56944)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCENDLSW
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.83333 ht 0.25000 at (2.66667,2.34722);
{
define attrs2 % %
setfillval 0.000000
"TRCENDLSW" at (2.67361,2.33796);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS -> TRCENDLSW
{
define attrs1 % %
define attrs1 % bold %
P0: (1.86111,2.02778)
P1: (1.89485,2.04406)
P2: (1.92933,2.05967)
P3: (1.96449,2.07478)
P4: (2.00022,2.08956)
P5: (2.03646,2.10417)
P6: (2.07311,2.11878)
P7: (2.11010,2.13356)
P8: (2.14733,2.14867)
P9: (2.18474,2.16428)
P10: (2.22222,2.18056)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.20833,2.20833)
P1: (2.34722,2.22222)
P2: (2.22222,2.13889)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCENDMSW
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.86111 ht 0.25000 at (2.66667,1.90278);
{
define attrs2 % %
setfillval 0.000000
"TRCENDMSW" at (2.66667,1.89352);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS -> TRCENDMSW
{
define attrs1 % %
define attrs1 % bold %
P0: (1.91667,1.90278)
P1: (1.93333,1.90278)
P2: (1.95000,1.90278)
P3: (1.96667,1.90278)
P4: (1.98333,1.90278)
P5: (2.00000,1.90278)
P6: (2.01667,1.90278)
P7: (2.03333,1.90278)
P8: (2.05000,1.90278)
P9: (2.06667,1.90278)
P10: (2.08333,1.90278)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.08333,1.94444)
P1: (2.22222,1.90278)
P2: (2.08333,1.87500)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCEX5
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (2.66667,1.45833);
{
define attrs2 % %
setfillval 0.000000
"TRCEX5" at (2.66667,1.44907);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS -> TRCEX5
{
define attrs1 % %
define attrs1 % bold %
P0: (1.86111,1.77778)
P1: (1.89485,1.76150)
P2: (1.92933,1.74589)
P3: (1.96449,1.73078)
P4: (2.00022,1.71600)
P5: (2.03646,1.70139)
P6: (2.07311,1.68678)
P7: (2.11010,1.67200)
P8: (2.14733,1.65689)
P9: (2.18474,1.64128)
P10: (2.22222,1.62500)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.22222,1.66667)
P1: (2.34722,1.58333)
P2: (2.20833,1.59722)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCEX9
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (2.66667,1.01389);
{
define attrs2 % %
setfillval 0.000000
"TRCEX9" at (2.66667,1.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS -> TRCEX9
{
define attrs1 % %
define attrs1 % bold %
P0: (1.65278,1.77778)
P1: (1.69310,1.72961)
P2: (1.73867,1.67744)
P3: (1.78890,1.62228)
P4: (1.84322,1.56511)
P5: (1.90104,1.50694)
P6: (1.96178,1.44878)
P7: (2.02485,1.39161)
P8: (2.08967,1.33644)
P9: (2.15565,1.28428)
P10: (2.22222,1.23611)
P11: (2.22637,1.23233)
P12: (2.23044,1.22922)
P13: (2.23435,1.22661)
P14: (2.23800,1.22433)
P15: (2.24132,1.22222)
P16: (2.24422,1.22011)
P17: (2.24663,1.21783)
P18: (2.24844,1.21522)
P19: (2.24960,1.21211)
P20: (2.25000,1.20833)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.26389,1.23611)
P1: (2.37500,1.13889)
P2: (2.23611,1.18056)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOP
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (2.66667,0.56944);
{
define attrs2 % %
setfillval 0.000000
"TRCTOP" at (2.66667,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	TRCTOPS -> TRCTOP
{
define attrs1 % %
define attrs1 % bold %
P0: (1.59722,1.77778)
P1: (1.63010,1.70404)
P2: (1.67022,1.61789)
P3: (1.71735,1.52190)
P4: (1.77122,1.41867)
P5: (1.83160,1.31076)
P6: (1.89822,1.20078)
P7: (1.97085,1.09129)
P8: (2.04922,0.98489)
P9: (2.13310,0.88415)
P10: (2.22222,0.79167)
P11: (2.22600,0.78789)
P12: (2.22911,0.78478)
P13: (2.23172,0.78217)
P14: (2.23400,0.77989)
P15: (2.23611,0.77778)
P16: (2.23822,0.77567)
P17: (2.24050,0.77339)
P18: (2.24311,0.77078)
P19: (2.24622,0.76767)
P20: (2.25000,0.76389)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3222
P0: (2.26389,0.79167)
P1: (2.36111,0.69444)
P2: (2.22222,0.73611)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
]
.PE
.\"  restore point size and font
.ps \n(.S
.ft \n(DF