.\"  Creator: dot version 1.10 (Wed Oct 29 15:31:07 CST 2003)
.\"  For: (fsw-web) Kim Lo
.\"  Title: G
.\"  save point size and font
.nr .S \n(.s
.nr DF \n(.f
.PS 2.61111 2.47222
# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
.nr SF 2611
scalethickness = 2611
# don't change anything below this line in this drawing
# non-fatal run-time pic version determination, version 2
boxrad=2.0 # will be reset to 0.0 by gpic only
scale=1.0 # required for comparisons
# boxrad is now 0.0 in gpic, else it remains 2.0
# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
# DWB 2 doesn't use fill and doesn't define fillval
# reset works in gpic and 10th edition, but isn't defined in DWB 2
# DWB 2 compatibility definitions
if boxrad > 1.0 && dashwid < 0.075 then X
	fillval = 1;
	define fill Y Y;
	define solid Y Y;
	define reset Y scale=1.0 Y;
X
reset # set to known state
# GNU pic vs. 10th Edition d\(e'tente
if fillval > 0.4 then X
	define setfillval Y fillval = 1 - Y;
	define bold Y thickness 2 Y;
	# if you use gpic and it barfs on encountering "solid",
	#	install a more recent version of gpic or switch to DWB or 10th Edition pic;
	#	sorry, the groff folks changed gpic; send any complaint to them;
X else Z
	define setfillval Y fillval = Y;
	define bold Y Y;
	define filled Y fill Y;
Z
# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
arrowhead = 7 # not used by graphviz
# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
boxrad = 0 # no rounded corners in graphviz
# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
linethick = 0; oldlinethick = linethick
# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
maxpsht = 2.472222
maxpswid = 2.611111
Dot: [
define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
setfillval 0.000000
setfillval 0.000000
.ft R 
.ps 7*\n(SFu/2611u
#	LLCMMEMERRC
{
define attrs1 % %
define attrs1 % filled %
setfillval 0.666667
setfillval 0.666667
box attrs1 fill wid 1.02778 ht 0.25000 at (0.63889,1.23611);
{
define attrs2 % %
setfillval 0.000000
"LLCMMEMERRC" at (0.63889,1.22685);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	DMPFLAGS
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.98611,2.34722);
{
define attrs2 % %
setfillval 0.000000
"DMPFLAGS" at (1.99306,2.33796);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLCMMEMERRC -> DMPFLAGS
{
define attrs1 % %
define attrs1 % bold %
P0: (0.73611,1.36111)
P1: (0.78222,1.42375)
P2: (0.83667,1.49389)
P3: (0.89861,1.56986)
P4: (0.96722,1.65000)
P5: (1.04167,1.73264)
P6: (1.12111,1.81611)
P7: (1.20472,1.89875)
P8: (1.29167,1.97889)
P9: (1.38111,2.05486)
P10: (1.47222,2.12500)
P11: (1.48017,2.12917)
P12: (1.48744,2.13333)
P13: (1.49422,2.13750)
P14: (1.50067,2.14167)
P15: (1.50694,2.14583)
P16: (1.51322,2.15000)
P17: (1.51967,2.15417)
P18: (1.52644,2.15833)
P19: (1.53372,2.16250)
P20: (1.54167,2.16667)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2611
P0: (1.51389,2.19444)
P1: (1.65278,2.22222)
P2: (1.54167,2.12500)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	MEMERRCCNT
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.94444 ht 0.25000 at (1.98611,1.90278);
{
define attrs2 % %
setfillval 0.000000
"MEMERRCCNT" at (1.98611,1.89352);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLCMMEMERRC -> MEMERRCCNT
{
define attrs1 % %
define attrs1 % bold %
P0: (0.87500,1.36111)
P1: (0.92660,1.38731)
P2: (0.98111,1.41567)
P3: (1.03812,1.44586)
P4: (1.09722,1.47756)
P5: (1.15799,1.51042)
P6: (1.22000,1.54411)
P7: (1.28285,1.57831)
P8: (1.34611,1.61267)
P9: (1.40938,1.64686)
P10: (1.47222,1.68056)
P11: (1.48094,1.68472)
P12: (1.49033,1.68889)
P13: (1.50022,1.69306)
P14: (1.51044,1.69722)
P15: (1.52083,1.70139)
P16: (1.53122,1.70556)
P17: (1.54144,1.70972)
P18: (1.55133,1.71389)
P19: (1.56072,1.71806)
P20: (1.56944,1.72222)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2611
P0: (1.56944,1.76389)
P1: (1.70833,1.77778)
P2: (1.59722,1.69444)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	MEMERRCLOG0
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 1.00000 ht 0.25000 at (1.98611,1.45833);
{
define attrs2 % %
setfillval 0.000000
"MEMERRCLOG0" at (1.98611,1.44907);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLCMMEMERRC -> MEMERRCLOG0
{
define attrs1 % %
define attrs1 % bold %
P0: (1.16667,1.31944)
P1: (1.18333,1.32322)
P2: (1.20000,1.32633)
P3: (1.21667,1.32894)
P4: (1.23333,1.33122)
P5: (1.25000,1.33333)
P6: (1.26667,1.33544)
P7: (1.28333,1.33772)
P8: (1.30000,1.34033)
P9: (1.31667,1.34344)
P10: (1.33333,1.34722)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2611
P0: (1.33333,1.37500)
P1: (1.47222,1.37500)
P2: (1.34722,1.31944)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	MEMERRCLOG1
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.97222 ht 0.25000 at (1.98611,1.01389);
{
define attrs2 % %
setfillval 0.000000
"MEMERRCLOG1" at (1.98611,1.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLCMMEMERRC -> MEMERRCLOG1
{
define attrs1 % %
define attrs1 % bold %
P0: (1.16667,1.15278)
P1: (1.18711,1.14900)
P2: (1.20689,1.14589)
P3: (1.22617,1.14328)
P4: (1.24511,1.14100)
P5: (1.26389,1.13889)
P6: (1.28267,1.13678)
P7: (1.30161,1.13450)
P8: (1.32089,1.13189)
P9: (1.34067,1.12878)
P10: (1.36111,1.12500)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2611
P0: (1.36111,1.16667)
P1: (1.48611,1.09722)
P2: (1.34722,1.09722)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	MEMERRCSTAT
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 1.00000 ht 0.25000 at (1.98611,0.56944);
{
define attrs2 % %
setfillval 0.000000
"MEMERRCSTAT" at (1.99306,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLCMMEMERRC -> MEMERRCSTAT
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,1.11111)
P1: (0.91310,1.08117)
P2: (0.96867,1.04989)
P3: (1.02724,1.01761)
P4: (1.08822,0.98467)
P5: (1.15104,0.95139)
P6: (1.21511,0.91811)
P7: (1.27985,0.88517)
P8: (1.34467,0.85289)
P9: (1.40899,0.82161)
P10: (1.47222,0.79167)
P11: (1.48056,0.78750)
P12: (1.48889,0.78333)
P13: (1.49722,0.77917)
P14: (1.50556,0.77500)
P15: (1.51389,0.77083)
P16: (1.52222,0.76667)
P17: (1.53056,0.76250)
P18: (1.53889,0.75833)
P19: (1.54722,0.75417)
P20: (1.55556,0.75000)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2611
P0: (1.56944,0.77778)
P1: (1.68056,0.69444)
P2: (1.54167,0.72222)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	PAD16
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.98611,0.12500);
{
define attrs2 % %
setfillval 0.000000
"PAD16" at (1.99306,0.11574);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LLCMMEMERRC -> PAD16
{
define attrs1 % %
define attrs1 % bold %
P0: (0.73611,1.11111)
P1: (0.78222,1.04847)
P2: (0.83667,0.97833)
P3: (0.89861,0.90236)
P4: (0.96722,0.82222)
P5: (1.04167,0.73958)
P6: (1.12111,0.65611)
P7: (1.20472,0.57347)
P8: (1.29167,0.49333)
P9: (1.38111,0.41736)
P10: (1.47222,0.34722)
P11: (1.47639,0.34307)
P12: (1.48056,0.33900)
P13: (1.48472,0.33510)
P14: (1.48889,0.33144)
P15: (1.49306,0.32812)
P16: (1.49722,0.32522)
P17: (1.50139,0.32282)
P18: (1.50556,0.32100)
P19: (1.50972,0.31985)
P20: (1.51389,0.31944)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2611
P0: (1.52778,0.34722)
P1: (1.63889,0.25000)
P2: (1.50000,0.29167)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
]
.PE
.\"  restore point size and font
.ps \n(.S
.ft \n(DF