.\"  Creator: dot version 1.10 (Wed Oct 29 15:31:07 CST 2003)
.\"  For: (fsw-web) Kim Lo
.\"  Title: G
.\"  save point size and font
.nr .S \n(.s
.nr DF \n(.f
.PS 3.27778 1.58333
# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
.nr SF 3278
scalethickness = 3278
# don't change anything below this line in this drawing
# non-fatal run-time pic version determination, version 2
boxrad=2.0 # will be reset to 0.0 by gpic only
scale=1.0 # required for comparisons
# boxrad is now 0.0 in gpic, else it remains 2.0
# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
# DWB 2 doesn't use fill and doesn't define fillval
# reset works in gpic and 10th edition, but isn't defined in DWB 2
# DWB 2 compatibility definitions
if boxrad > 1.0 && dashwid < 0.075 then X
	fillval = 1;
	define fill Y Y;
	define solid Y Y;
	define reset Y scale=1.0 Y;
X
reset # set to known state
# GNU pic vs. 10th Edition d\(e'tente
if fillval > 0.4 then X
	define setfillval Y fillval = 1 - Y;
	define bold Y thickness 2 Y;
	# if you use gpic and it barfs on encountering "solid",
	#	install a more recent version of gpic or switch to DWB or 10th Edition pic;
	#	sorry, the groff folks changed gpic; send any complaint to them;
X else Z
	define setfillval Y fillval = Y;
	define bold Y Y;
	define filled Y fill Y;
Z
# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
arrowhead = 7 # not used by graphviz
# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
boxrad = 0 # no rounded corners in graphviz
# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
linethick = 0; oldlinethick = linethick
# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
maxpsht = 1.583333
maxpswid = 3.277778
Dot: [
define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
setfillval 0.000000
setfillval 0.000000
.ft R 
.ps 7*\n(SFu/3278u
#	RedLimAlrt
{
define attrs1 % %
define attrs1 % filled %
setfillval 0.666667
setfillval 0.666667
box attrs1 fill wid 0.75000 ht 0.25000 at (0.48611,0.79167);
{
define attrs2 % %
setfillval 0.000000
"RedLimAlrt" at (0.48611,0.78241);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RLADC
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,1.45833);
{
define attrs2 % %
setfillval 0.000000
"RLADC" at (1.54861,1.44907);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RedLimAlrt -> RLADC
{
define attrs1 % %
define attrs1 % bold %
P0: (0.68056,0.91667)
P1: (0.72004,0.94286)
P2: (0.76311,0.97122)
P3: (0.80918,1.00142)
P4: (0.85767,1.03311)
P5: (0.90799,1.06597)
P6: (0.95956,1.09967)
P7: (1.01179,1.13386)
P8: (1.06411,1.16822)
P9: (1.11593,1.20242)
P10: (1.16667,1.23611)
P11: (1.17083,1.23989)
P12: (1.17500,1.24300)
P13: (1.17917,1.24561)
P14: (1.18333,1.24789)
P15: (1.18750,1.25000)
P16: (1.19167,1.25211)
P17: (1.19583,1.25439)
P18: (1.20000,1.25700)
P19: (1.20417,1.26011)
P20: (1.20833,1.26389)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3278
P0: (1.19444,1.29167)
P1: (1.33333,1.33333)
P2: (1.22222,1.23611)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RLCNT
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,1.01389);
{
define attrs2 % %
setfillval 0.000000
"RLCNT" at (1.54861,1.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RedLimAlrt -> RLCNT
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,0.87500)
P1: (0.87778,0.87878)
P2: (0.89444,0.88189)
P3: (0.91111,0.88450)
P4: (0.92778,0.88678)
P5: (0.94444,0.88889)
P6: (0.96111,0.89100)
P7: (0.97778,0.89328)
P8: (0.99444,0.89589)
P9: (1.01111,0.89900)
P10: (1.02778,0.90278)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3278
P0: (1.02778,0.93056)
P1: (1.16667,0.93056)
P2: (1.04167,0.87500)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RLDEV_LRLIMDEVICE
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,0.56944);
{
define attrs2 % %
setfillval 0.000000
"RLDEV " at (1.54167,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RedLimAlrt -> RLDEV_LRLIMDEVICE
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,0.70833)
P1: (0.87778,0.70456)
P2: (0.89444,0.70144)
P3: (0.91111,0.69883)
P4: (0.92778,0.69656)
P5: (0.94444,0.69444)
P6: (0.96111,0.69233)
P7: (0.97778,0.69006)
P8: (0.99444,0.68744)
P9: (1.01111,0.68433)
P10: (1.02778,0.68056)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3278
P0: (1.04167,0.70833)
P1: (1.16667,0.65278)
P2: (1.02778,0.65278)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RLLIM
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.54167,0.12500);
{
define attrs2 % %
setfillval 0.000000
"RLLIM" at (1.54861,0.11574);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RedLimAlrt -> RLLIM
{
define attrs1 % %
define attrs1 % bold %
P0: (0.66667,0.66667)
P1: (0.70992,0.63672)
P2: (0.75600,0.60544)
P3: (0.80442,0.57317)
P4: (0.85467,0.54022)
P5: (0.90625,0.50694)
P6: (0.95867,0.47367)
P7: (1.01142,0.44072)
P8: (1.06400,0.40844)
P9: (1.11592,0.37717)
P10: (1.16667,0.34722)
P11: (1.17083,0.34682)
P12: (1.17500,0.34567)
P13: (1.17917,0.34385)
P14: (1.18333,0.34144)
P15: (1.18750,0.33854)
P16: (1.19167,0.33522)
P17: (1.19583,0.33157)
P18: (1.20000,0.32767)
P19: (1.20417,0.32360)
P20: (1.20833,0.31944)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3278
P0: (1.22222,0.34722)
P1: (1.31944,0.25000)
P2: (1.18056,0.29167)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LRLIMDEVICE
{
define attrs1 % %
define attrs1 % dashed %
box attrs1 wid 0.94444 ht 0.25000 at (2.69444,0.56944);
{
define attrs2 % %
setfillval 0.000000
"LRLIMDEVICE " at (2.70139,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	RLDEV_LRLIMDEVICE -> LRLIMDEVICE
{
define attrs1 % %
define attrs1 % bold %
P0: (1.91667,0.56944)
P1: (1.93333,0.56944)
P2: (1.95000,0.56944)
P3: (1.96667,0.56944)
P4: (1.98333,0.56944)
P5: (2.00000,0.56944)
P6: (2.01667,0.56944)
P7: (2.03333,0.56944)
P8: (2.05000,0.56944)
P9: (2.06667,0.56944)
P10: (2.08333,0.56944)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3278
P0: (2.08333,0.61111)
P1: (2.22222,0.56944)
P2: (2.08333,0.54167)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
]
.PE
.\"  restore point size and font
.ps \n(.S
.ft \n(DF