.\"  Creator: dot version 1.10 (Wed Oct 29 15:31:07 CST 2003)
.\"  For: (fsw-web) Kim Lo
.\"  Title: G
.\"  save point size and font
.nr .S \n(.s
.nr DF \n(.f
.PS 3.69444 2.91667
# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
.nr SF 3694
scalethickness = 3694
# don't change anything below this line in this drawing
# non-fatal run-time pic version determination, version 2
boxrad=2.0 # will be reset to 0.0 by gpic only
scale=1.0 # required for comparisons
# boxrad is now 0.0 in gpic, else it remains 2.0
# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
# DWB 2 doesn't use fill and doesn't define fillval
# reset works in gpic and 10th edition, but isn't defined in DWB 2
# DWB 2 compatibility definitions
if boxrad > 1.0 && dashwid < 0.075 then X
	fillval = 1;
	define fill Y Y;
	define solid Y Y;
	define reset Y scale=1.0 Y;
X
reset # set to known state
# GNU pic vs. 10th Edition d\(e'tente
if fillval > 0.4 then X
	define setfillval Y fillval = 1 - Y;
	define bold Y thickness 2 Y;
	# if you use gpic and it barfs on encountering "solid",
	#	install a more recent version of gpic or switch to DWB or 10th Edition pic;
	#	sorry, the groff folks changed gpic; send any complaint to them;
X else Z
	define setfillval Y fillval = Y;
	define bold Y Y;
	define filled Y fill Y;
Z
# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
arrowhead = 7 # not used by graphviz
# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
boxrad = 0 # no rounded corners in graphviz
# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
linethick = 0; oldlinethick = linethick
# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
maxpsht = 2.916667
maxpswid = 3.694444
Dot: [
define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
setfillval 0.000000
setfillval 0.000000
.ft R 
.ps 7*\n(SFu/3694u
#	SETSTATS
{
define attrs1 % %
define attrs1 % filled %
setfillval 0.666667
setfillval 0.666667
box attrs1 fill wid 0.75000 ht 0.25000 at (0.48611,1.45833);
{
define attrs2 % %
setfillval 0.000000
"SETSTATS" at (0.49306,1.44907);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	ITC_NodeId_LCMNODEID
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.79167,2.79167);
{
define attrs2 % %
setfillval 0.000000
"ITC_NodeId " at (1.79167,2.78241);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	SETSTATS -> ITC_NodeId_LCMNODEID
{
define attrs1 % %
define attrs1 % bold %
P0: (0.52778,1.58333)
P1: (0.56029,1.66082)
P2: (0.59956,1.74989)
P3: (0.64565,1.84796)
P4: (0.69867,1.95244)
P5: (0.75868,2.06076)
P6: (0.82578,2.17033)
P7: (0.90004,2.27857)
P8: (0.98156,2.38289)
P9: (1.07040,2.48071)
P10: (1.16667,2.56944)
P11: (1.17917,2.57776)
P12: (1.19167,2.58600)
P13: (1.20417,2.59407)
P14: (1.21667,2.60189)
P15: (1.22917,2.60938)
P16: (1.24167,2.61644)
P17: (1.25417,2.62301)
P18: (1.26667,2.62900)
P19: (1.27917,2.63432)
P20: (1.29167,2.63889)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3694
P0: (1.27778,2.66667)
P1: (1.41667,2.69444)
P2: (1.30556,2.61111)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Pad1
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.79167,2.34722);
{
define attrs2 % %
setfillval 0.000000
"Pad1" at (1.79861,2.33796);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	SETSTATS -> Pad1
{
define attrs1 % %
define attrs1 % bold %
P0: (0.59722,1.58333)
P1: (0.63754,1.63150)
P2: (0.68311,1.68367)
P3: (0.73335,1.73883)
P4: (0.78767,1.79600)
P5: (0.84549,1.85417)
P6: (0.90622,1.91233)
P7: (0.96929,1.96950)
P8: (1.03411,2.02467)
P9: (1.10010,2.07683)
P10: (1.16667,2.12500)
P11: (1.17917,2.12956)
P12: (1.19167,2.13478)
P13: (1.20417,2.14050)
P14: (1.21667,2.14656)
P15: (1.22917,2.15278)
P16: (1.24167,2.15900)
P17: (1.25417,2.16506)
P18: (1.26667,2.17078)
P19: (1.27917,2.17600)
P20: (1.29167,2.18056)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3694
P0: (1.27778,2.20833)
P1: (1.41667,2.23611)
P2: (1.30556,2.15278)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	STATSID
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.79167,1.90278);
{
define attrs2 % %
setfillval 0.000000
"STATSID" at (1.79861,1.89352);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	SETSTATS -> STATSID
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,1.58333)
P1: (0.89942,1.59999)
P2: (0.93922,1.61656)
P3: (0.98036,1.63296)
P4: (1.02267,1.64911)
P5: (1.06597,1.66493)
P6: (1.11011,1.68033)
P7: (1.15492,1.69524)
P8: (1.20022,1.70956)
P9: (1.24586,1.72321)
P10: (1.29167,1.73611)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3694
P0: (1.27778,1.76389)
P1: (1.41667,1.77778)
P2: (1.29167,1.69444)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	STATSMASK
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.77778 ht 0.25000 at (1.79167,1.45833);
{
define attrs2 % %
setfillval 0.000000
"STATSMASK" at (1.79167,1.44907);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	SETSTATS -> STATSMASK
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,1.45833)
P1: (0.89900,1.45833)
P2: (0.93756,1.45833)
P3: (0.97661,1.45833)
P4: (1.01600,1.45833)
P5: (1.05556,1.45833)
P6: (1.09511,1.45833)
P7: (1.13450,1.45833)
P8: (1.17356,1.45833)
P9: (1.21211,1.45833)
P10: (1.25000,1.45833)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3694
P0: (1.25000,1.50000)
P1: (1.38889,1.45833)
P2: (1.25000,1.43056)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	STATSOPTIONMASK
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 1.22222 ht 0.25000 at (1.79167,1.01389);
{
define attrs2 % %
setfillval 0.000000
"STATSOPTIONMASK" at (1.79167,1.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	SETSTATS -> STATSOPTIONMASK
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,1.33333)
P1: (0.89942,1.31668)
P2: (0.93922,1.30011)
P3: (0.98036,1.28371)
P4: (1.02267,1.26756)
P5: (1.06597,1.25174)
P6: (1.11011,1.23633)
P7: (1.15492,1.22143)
P8: (1.20022,1.20711)
P9: (1.24586,1.19346)
P10: (1.29167,1.18056)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3694
P0: (1.29167,1.22222)
P1: (1.41667,1.13889)
P2: (1.27778,1.15278)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	STATSTIMELEN
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.97222 ht 0.25000 at (1.79167,0.56944);
{
define attrs2 % %
setfillval 0.000000
"STATSTIMELEN" at (1.79861,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	SETSTATS -> STATSTIMELEN
{
define attrs1 % %
define attrs1 % bold %
P0: (0.58333,1.33333)
P1: (0.62367,1.28517)
P2: (0.66933,1.23300)
P3: (0.71983,1.17783)
P4: (0.77467,1.12067)
P5: (0.83333,1.06250)
P6: (0.89533,1.00433)
P7: (0.96017,0.94717)
P8: (1.02733,0.89200)
P9: (1.09633,0.83983)
P10: (1.16667,0.79167)
P11: (1.17124,0.78750)
P12: (1.17656,0.78333)
P13: (1.18254,0.77917)
P14: (1.18911,0.77500)
P15: (1.19618,0.77083)
P16: (1.20367,0.76667)
P17: (1.21149,0.76250)
P18: (1.21956,0.75833)
P19: (1.22779,0.75417)
P20: (1.23611,0.75000)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3694
P0: (1.25000,0.77778)
P1: (1.36111,0.69444)
P2: (1.22222,0.72222)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	STATSTIMESAMP
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 1.05556 ht 0.25000 at (1.79167,0.12500);
{
define attrs2 % %
setfillval 0.000000
"STATSTIMESAMP" at (1.79861,0.11574);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	SETSTATS -> STATSTIMESAMP
{
define attrs1 % %
define attrs1 % bold %
P0: (0.52778,1.33333)
P1: (0.56029,1.25547)
P2: (0.59956,1.16544)
P3: (0.64565,1.06608)
P4: (0.69867,0.96022)
P5: (0.75868,0.85069)
P6: (0.82578,0.74033)
P7: (0.90004,0.63197)
P8: (0.98156,0.52844)
P9: (1.07040,0.43258)
P10: (1.16667,0.34722)
P11: (1.17082,0.34344)
P12: (1.17489,0.34033)
P13: (1.17879,0.33772)
P14: (1.18244,0.33544)
P15: (1.18576,0.33333)
P16: (1.18867,0.33122)
P17: (1.19107,0.32894)
P18: (1.19289,0.32633)
P19: (1.19404,0.32322)
P20: (1.19444,0.31944)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3694
P0: (1.20833,0.34722)
P1: (1.31944,0.25000)
P2: (1.18056,0.29167)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	LCMNODEID
{
define attrs1 % %
define attrs1 % dashed %
box attrs1 wid 0.83333 ht 0.25000 at (3.15278,2.79167);
{
define attrs2 % %
setfillval 0.000000
"LCMNODEID " at (3.15278,2.78241);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	ITC_NodeId_LCMNODEID -> LCMNODEID
{
define attrs1 % %
define attrs1 % bold %
P0: (2.16667,2.79167)
P1: (2.20496,2.79167)
P2: (2.24467,2.79167)
P3: (2.28554,2.79167)
P4: (2.32733,2.79167)
P5: (2.36979,2.79167)
P6: (2.41267,2.79167)
P7: (2.45571,2.79167)
P8: (2.49867,2.79167)
P9: (2.54129,2.79167)
P10: (2.58333,2.79167)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 3694
P0: (2.58333,2.83333)
P1: (2.72222,2.79167)
P2: (2.58333,2.76389)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
]
.PE
.\"  restore point size and font
.ps \n(.S
.ft \n(DF