.\"  Creator: dot version 1.10 (Wed Oct 29 15:31:07 CST 2003)
.\"  For: (fsw-web) Kim Lo
.\"  Title: G
.\"  save point size and font
.nr .S \n(.s
.nr DF \n(.f
.PS 2.41667 5.58333
# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
.nr SF 2417
scalethickness = 2417
# don't change anything below this line in this drawing
# non-fatal run-time pic version determination, version 2
boxrad=2.0 # will be reset to 0.0 by gpic only
scale=1.0 # required for comparisons
# boxrad is now 0.0 in gpic, else it remains 2.0
# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
# DWB 2 doesn't use fill and doesn't define fillval
# reset works in gpic and 10th edition, but isn't defined in DWB 2
# DWB 2 compatibility definitions
if boxrad > 1.0 && dashwid < 0.075 then X
	fillval = 1;
	define fill Y Y;
	define solid Y Y;
	define reset Y scale=1.0 Y;
X
reset # set to known state
# GNU pic vs. 10th Edition d\(e'tente
if fillval > 0.4 then X
	define setfillval Y fillval = 1 - Y;
	define bold Y thickness 2 Y;
	# if you use gpic and it barfs on encountering "solid",
	#	install a more recent version of gpic or switch to DWB or 10th Edition pic;
	#	sorry, the groff folks changed gpic; send any complaint to them;
X else Z
	define setfillval Y fillval = Y;
	define bold Y Y;
	define filled Y fill Y;
Z
# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
arrowhead = 7 # not used by graphviz
# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
boxrad = 0 # no rounded corners in graphviz
# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
linethick = 0; oldlinethick = linethick
# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
maxpsht = 5.583333
maxpswid = 2.416667
Dot: [
define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
setfillval 0.000000
setfillval 0.000000
.ft R 
.ps 7*\n(SFu/2417u
#	Hkp
{
define attrs1 % %
define attrs1 % filled %
setfillval 0.666667
setfillval 0.666667
box attrs1 fill wid 0.75000 ht 0.25000 at (0.48611,2.79167);
{
define attrs2 % %
setfillval 0.000000
"Hkp" at (0.49306,2.78241);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Errors
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.73611,5.45833);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Errors" at (1.74306,5.44907);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Errors
{
define attrs1 % %
define attrs1 % bold %
P0: (0.50000,2.91667)
P1: (0.53029,3.08324)
P2: (0.57067,3.29922)
P3: (0.62037,3.55154)
P4: (0.67867,3.82711)
P5: (0.74479,4.11285)
P6: (0.81800,4.39567)
P7: (0.89754,4.66249)
P8: (0.98267,4.90022)
P9: (1.07262,5.09579)
P10: (1.16667,5.23611)
P11: (1.17461,5.24404)
P12: (1.18189,5.25122)
P13: (1.18867,5.25774)
P14: (1.19511,5.26367)
P15: (1.20139,5.26910)
P16: (1.20767,5.27411)
P17: (1.21411,5.27879)
P18: (1.22089,5.28322)
P19: (1.22817,5.28749)
P20: (1.23611,5.29167)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.22222,5.31944)
P1: (1.36111,5.36111)
P2: (1.25000,5.26389)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Hkp_Byts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.88889 ht 0.25000 at (1.73611,5.01389);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Hkp_Byts" at (1.74306,5.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Hkp_Byts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.50000,2.91667)
P1: (0.51154,3.03854)
P2: (0.53067,3.19167)
P3: (0.55912,3.36979)
P4: (0.59867,3.56667)
P5: (0.65104,3.77604)
P6: (0.71800,3.99167)
P7: (0.80129,4.20729)
P8: (0.90267,4.41667)
P9: (1.02388,4.61354)
P10: (1.16667,4.79167)
P11: (1.16706,4.79206)
P12: (1.16811,4.79311)
P13: (1.16967,4.79467)
P14: (1.17156,4.79656)
P15: (1.17361,4.79861)
P16: (1.17567,4.80067)
P17: (1.17756,4.80256)
P18: (1.17911,4.80411)
P19: (1.18017,4.80517)
P20: (1.18056,4.80556)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.16667,4.83333)
P1: (1.29167,4.88889)
P2: (1.20833,4.77778)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Hkp_Pkts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.88889 ht 0.25000 at (1.73611,4.56944);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Hkp_Pkts" at (1.74306,4.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Hkp_Pkts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.51389,2.91667)
P1: (0.53404,3.01635)
P2: (0.56178,3.13744)
P3: (0.59801,3.27554)
P4: (0.64367,3.42622)
P5: (0.69965,3.58507)
P6: (0.76689,3.74767)
P7: (0.84629,3.90960)
P8: (0.93878,4.06644)
P9: (1.04526,4.21379)
P10: (1.16667,4.34722)
P11: (1.17082,4.35100)
P12: (1.17489,4.35411)
P13: (1.17879,4.35672)
P14: (1.18244,4.35900)
P15: (1.18576,4.36111)
P16: (1.18867,4.36322)
P17: (1.19107,4.36550)
P18: (1.19289,4.36811)
P19: (1.19404,4.37122)
P20: (1.19444,4.37500)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.18056,4.40278)
P1: (1.31944,4.44444)
P2: (1.20833,4.34722)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Interrupts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.86111 ht 0.25000 at (1.73611,4.12500);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Interrupts" at (1.74306,4.11574);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Interrupts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.54167,2.91667)
P1: (0.57079,2.99415)
P2: (0.60800,3.08322)
P3: (0.65304,3.18129)
P4: (0.70567,3.28578)
P5: (0.76562,3.39410)
P6: (0.83267,3.50367)
P7: (0.90654,3.61190)
P8: (0.98700,3.71622)
P9: (1.07379,3.81404)
P10: (1.16667,3.90278)
P11: (1.17083,3.90693)
P12: (1.17500,3.91100)
P13: (1.17917,3.91490)
P14: (1.18333,3.91856)
P15: (1.18750,3.92188)
P16: (1.19167,3.92478)
P17: (1.19583,3.92718)
P18: (1.20000,3.92900)
P19: (1.20417,3.93015)
P20: (1.20833,3.93056)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.19444,3.95833)
P1: (1.33333,4.00000)
P2: (1.22222,3.90278)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Rx_Cmd_Byts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 1.13889 ht 0.25000 at (1.73611,3.68056);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Rx_Cmd_Byts" at (1.74306,3.67130);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Rx_Cmd_Byts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.59722,2.91667)
P1: (0.63754,2.96483)
P2: (0.68311,3.01700)
P3: (0.73335,3.07217)
P4: (0.78767,3.12933)
P5: (0.84549,3.18750)
P6: (0.90622,3.24567)
P7: (0.96929,3.30283)
P8: (1.03411,3.35800)
P9: (1.10010,3.41017)
P10: (1.16667,3.45833)
P11: (1.17500,3.46250)
P12: (1.18333,3.46667)
P13: (1.19167,3.47083)
P14: (1.20000,3.47500)
P15: (1.20833,3.47917)
P16: (1.21667,3.48333)
P17: (1.22500,3.48750)
P18: (1.23333,3.49167)
P19: (1.24167,3.49583)
P20: (1.25000,3.50000)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.22222,3.52778)
P1: (1.36111,3.55556)
P2: (1.25000,3.45833)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Rx_Cmd_Pkts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 1.11111 ht 0.25000 at (1.73611,3.23611);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Rx_Cmd_Pkts" at (1.73611,3.22685);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Rx_Cmd_Pkts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.84722,2.91667)
P1: (0.88512,2.93332)
P2: (0.92378,2.94989)
P3: (0.96310,2.96629)
P4: (1.00300,2.98244)
P5: (1.04340,2.99826)
P6: (1.08422,3.01367)
P7: (1.12538,3.02857)
P8: (1.16678,3.04289)
P9: (1.20835,3.05654)
P10: (1.25000,3.06944)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.23611,3.09722)
P1: (1.37500,3.11111)
P2: (1.25000,3.02778)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Tlm_Byts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.86111 ht 0.25000 at (1.73611,2.79167);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Tlm_Byts" at (1.73611,2.78241);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Tlm_Byts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.86111,2.79167)
P1: (0.89028,2.79167)
P2: (0.91944,2.79167)
P3: (0.94861,2.79167)
P4: (0.97778,2.79167)
P5: (1.00694,2.79167)
P6: (1.03611,2.79167)
P7: (1.06528,2.79167)
P8: (1.09444,2.79167)
P9: (1.12361,2.79167)
P10: (1.15278,2.79167)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.15278,2.83333)
P1: (1.29167,2.79167)
P2: (1.15278,2.76389)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Tlm_Pkts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.86111 ht 0.25000 at (1.73611,2.34722);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Tlm_Pkts" at (1.73611,2.33796);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Tlm_Pkts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.84722,2.66667)
P1: (0.88512,2.65001)
P2: (0.92378,2.63344)
P3: (0.96310,2.61704)
P4: (1.00300,2.60089)
P5: (1.04340,2.58507)
P6: (1.08422,2.56967)
P7: (1.12538,2.55476)
P8: (1.16678,2.54044)
P9: (1.20835,2.52679)
P10: (1.25000,2.51389)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.25000,2.55556)
P1: (1.37500,2.47222)
P2: (1.23611,2.48611)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Tx_Cmd_Byts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 1.11111 ht 0.25000 at (1.73611,1.90278);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Tx_Cmd_Byts" at (1.73611,1.89352);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Tx_Cmd_Byts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.58333,2.66667)
P1: (0.62367,2.61850)
P2: (0.66933,2.56633)
P3: (0.71983,2.51117)
P4: (0.77467,2.45400)
P5: (0.83333,2.39583)
P6: (0.89533,2.33767)
P7: (0.96017,2.28050)
P8: (1.02733,2.22533)
P9: (1.09633,2.17317)
P10: (1.16667,2.12500)
P11: (1.17122,2.12083)
P12: (1.17644,2.11667)
P13: (1.18217,2.11250)
P14: (1.18822,2.10833)
P15: (1.19444,2.10417)
P16: (1.20067,2.10000)
P17: (1.20672,2.09583)
P18: (1.21244,2.09167)
P19: (1.21767,2.08750)
P20: (1.22222,2.08333)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.23611,2.11111)
P1: (1.34722,2.02778)
P2: (1.20833,2.05556)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Ctdb_Tx_Cmd_Pkts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 1.11111 ht 0.25000 at (1.73611,1.45833);
{
define attrs2 % %
setfillval 0.000000
"Ctdb_Tx_Cmd_Pkts" at (1.74306,1.44907);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Ctdb_Tx_Cmd_Pkts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.52778,2.66667)
P1: (0.56067,2.58881)
P2: (0.60089,2.49878)
P3: (0.64828,2.39942)
P4: (0.70267,2.29356)
P5: (0.76389,2.18403)
P6: (0.83178,2.07367)
P7: (0.90617,1.96531)
P8: (0.98689,1.86178)
P9: (1.07378,1.76592)
P10: (1.16667,1.68056)
P11: (1.17082,1.67678)
P12: (1.17489,1.67367)
P13: (1.17879,1.67106)
P14: (1.18244,1.66878)
P15: (1.18576,1.66667)
P16: (1.18867,1.66456)
P17: (1.19107,1.66228)
P18: (1.19289,1.65967)
P19: (1.19404,1.65656)
P20: (1.19444,1.65278)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.20833,1.68056)
P1: (1.31944,1.58333)
P2: (1.18056,1.62500)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	File_Upl_Pkts
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.77778 ht 0.25000 at (1.73611,1.01389);
{
define attrs2 % %
setfillval 0.000000
"File_Upl_Pkts" at (1.73611,1.00463);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> File_Upl_Pkts
{
define attrs1 % %
define attrs1 % bold %
P0: (0.51389,2.66667)
P1: (0.53404,2.56661)
P2: (0.56178,2.44456)
P3: (0.59801,2.30517)
P4: (0.64367,2.15311)
P5: (0.69965,1.99306)
P6: (0.76689,1.82967)
P7: (0.84629,1.66761)
P8: (0.93878,1.51156)
P9: (1.04526,1.36617)
P10: (1.16667,1.23611)
P11: (1.17085,1.23194)
P12: (1.17511,1.22778)
P13: (1.17954,1.22361)
P14: (1.18422,1.21944)
P15: (1.18924,1.21528)
P16: (1.19467,1.21111)
P17: (1.20060,1.20694)
P18: (1.20711,1.20278)
P19: (1.21429,1.19861)
P20: (1.22222,1.19444)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.23611,1.22222)
P1: (1.33333,1.12500)
P2: (1.19444,1.16667)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	File_Upl_State
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.80556 ht 0.25000 at (1.73611,0.56944);
{
define attrs2 % %
setfillval 0.000000
"File_Upl_State" at (1.74306,0.56019);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> File_Upl_State
{
define attrs1 % %
define attrs1 % bold %
P0: (0.50000,2.66667)
P1: (0.51154,2.54442)
P2: (0.53067,2.39033)
P3: (0.55912,2.21092)
P4: (0.59867,2.01267)
P5: (0.65104,1.80208)
P6: (0.71800,1.58567)
P7: (0.80129,1.36992)
P8: (0.90267,1.16133)
P9: (1.02388,0.96642)
P10: (1.16667,0.79167)
P11: (1.17085,0.78711)
P12: (1.17511,0.78189)
P13: (1.17954,0.77617)
P14: (1.18422,0.77011)
P15: (1.18924,0.76389)
P16: (1.19467,0.75767)
P17: (1.20060,0.75161)
P18: (1.20711,0.74589)
P19: (1.21429,0.74067)
P20: (1.22222,0.73611)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.23611,0.76389)
P1: (1.33333,0.66667)
P2: (1.19444,0.70833)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Pad_16
{
define attrs1 % %
define attrs1 % bold %
box attrs1 wid 0.75000 ht 0.25000 at (1.73611,0.12500);
{
define attrs2 % %
setfillval 0.000000
"Pad_16" at (1.73611,0.11574);
}
linethick = oldlinethick
}
linethick = oldlinethick
#	Hkp -> Pad_16
{
define attrs1 % %
define attrs1 % bold %
P0: (0.50000,2.66667)
P1: (0.53029,2.49972)
P2: (0.57067,2.28278)
P3: (0.62037,2.02917)
P4: (0.67867,1.75222)
P5: (0.74479,1.46528)
P6: (0.81800,1.18167)
P7: (0.89754,0.91472)
P8: (0.98267,0.67778)
P9: (1.07262,0.48417)
P10: (1.16667,0.34722)
P11: (1.17461,0.33929)
P12: (1.18189,0.33211)
P13: (1.18867,0.32560)
P14: (1.19511,0.31967)
P15: (1.20139,0.31424)
P16: (1.20767,0.30922)
P17: (1.21411,0.30454)
P18: (1.22089,0.30011)
P19: (1.22817,0.29585)
P20: (1.23611,0.29167)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
define attrs2 % %
oldlinethick = linethick;linethick = 1 * scalethickness / 2417
P0: (1.25000,0.31944)
P1: (1.36111,0.22222)
P2: (1.22222,0.26389)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
}
linethick = oldlinethick
]
.PE
.\"  restore point size and font
.ps \n(.S
.ft \n(DF