0x10001ed7  LCB   REQTO     E  "Request list timeout."
0x10002691  LCB   RTRUNC    W  "Received LATp truncate error."
0x10002b97  LCB   PLTO      E  "Polled mode.  Request list timeout."
0x10003895  LCB   RTOERR    W  "Received LATp timeout error."
0x10004348  LCB   __OK      S  "Success"
0x100082eb  LCB   REQMEM    E  "Error allocating %d bytes for request FORK systems messages."
0x10009885  LCB   RTRUNRN   W  "Received LATp transmit underrun error."
0x1000a395  LCB   RDPERR    W  "Received LATp cell parity error."
0x1000a795  LCB   RHPERR    W  "Received LATp header parity error."
0x1000ae2f  LCB   SDMATA    E  "PCI SBC to LCB, DMA target abort  Result descriptor 0x%08x."
0x1000b01f  LCB   SDMAMA    E  "PCI SBC to LCB, DMA master abort.  Result descriptor 0x%08x"
0x1000b0e3  LCB   SDMAPP    E  "PCI SBC to LCB, PCI parity error  Result descriptor 0x%08x."
0x1000b56b  LCB   PLHMM     E  "Result LIOX handle mismatch.  Unexpected result descriptor value return."
0x1000ba4f  LCB   SMLEVT    E  "Small event length detected, containing only %d 32-bit words."
0x10010073  LCB   RWFAIL    E  "RW_init() failed with code %d"
0x10014e2f  LCB   LDMATA    E  "PCI LCB to SBC, DMA target abort  Result descriptor 0x%08x."
0x1001501f  LCB   LDMAMA    E  "PCI LCB to SBC, DMA master abort  Result descriptor 0x%08x."
0x100150e3  LCB   LDMAPP    E  "PCI LCB to SBC, PCI parity error  Result descriptor 0x%08x."
0x10021031  LCB   REQFULL   W  "Maximum number of outstanding LCB requests reached, try again later."
0x100214d7  LCB   RSTEMPTY  E  "Result FIFO empty on read when expecting non-empty."
0x10029acb  LCB   RSTQUEUE  E  "The result FORK queue was not set before calling LCB_dispatchStart()"
0x10031ed7  LCB   PCIIRQ    E  "Unable to connect PCI interrupt handler"
0x100339c3  LCB   PBSRWI    E  "PBS/RW_init() failed with code %d."
0x100540eb  LCB   LDMAMEM   E  "PCI LCB to SBC, event circular buffer insufficient memory  Result descriptor 0x%08x."
0x10087acb  LCB   REQQUEUE  E  "The request FORK queue was not set before calling LCB_dispatchStart()"
0x100b13ff  LCB   SDMABUFF  E  "PCI SBC to LCB, intermediate LCB FIFO buffer full  Result descriptor 0x%08x."
0x100c7bbb  LCB   PCIIRQD   E  "Unable to disconnect PCI interrupt handler"
0x100c8873  LCB   PCIFAIL   E  "Unable to detect PCI board with vendorID 0x%04x, deviceID 0x%04x"
0x100ee5a3  LCB   ERRMSGAL  E  "Error creating LCB error message pool. FPA_init() returns %d"
0x100ee6b7  LCB   ERRMSGFR  E  "Error freeing LCB error message. FPA_free() returns %d"
0x100ef8a3  LCB   ERRFORKC  E  "Error creating FORK queue.  FORK_create() returns %d"
0x100f3acb  LCB   ERRQUEUE  E  "The error FORK queue was not set before calling LCB_dispatchStart()"
0x1014e0f3  LCB   LDMASTOP  E  "PCI LCB to SBC, PCI STOP error  Result descriptor 0x%08x."
0x101513ab  LCB   LDMABUFE  E  "PCI LCB to SBC, intermediate LCB FIFO buffer empty  Result descriptor 0x%08x."
0x10197acb  LCB   ISRQUEUE  E  "The ISR FORK queue was not set before calling LCB_dispatchStart()"
0x1027f897  LCB   UNKWNERR  E  "Unknown PCI %s DMA error code 0x%08x."
0x10322263  LCB   PCIMAPLP  E  "Unable to map local address to PCI memory"
0x103223b3  LCB   PCIMAPPL  E  "Unable to map PCI memory to local address"
0x1032e72b  LCB   BADHDRSZ  E  "The sizeof(LCB_msg_priv_hdr) mod 16  must be 12 bytes. Currently %d"
0x103310bb  LCB   BADPARAM  E  "Parameter (%s) has bad value (0x%08x)"
0x10333eab  LCB   BADBUFSZ  E  "Buffer size must be multiple of sizeof(LCB_ErrMsg)"
0x108056eb  LIOX  NOMEM     E  "Error allocating %d bytes for %s"
0x1080d997  LIOX  SYNCTO    E  "Timeout waiting for synchronous command completion"
0x1080f07f  LIOX  ERRFPA    E  "FPA_init() error code: %d"
0x10813803  LIOX  NOTRSP    E  "Attempted to retreive payload/header info from a result item that does not contain a response"
0x1081bf2b  LIOX  RSTSTATE  E  "Received LIOX Handle not in state LIOX_PEND"
0x1083b0cf  LIOX  ERRINIT   E  "LIOX Handle not initialized properly"
0x10867b17  LIOX  EVNTLEN   E  "Attempted to queue event fabric item with a length (%u) that is not in units of LATp cells (4 32-bit words)"
0x1089cd11  LIOX  CIALLOC   W  "Unable to allocate the requested command item size %d (in cells)"
0x108caf27  LIOX  BADADDR   E  "%s address 0x%04x out of range"
0x10935e2f  LIOX  NORSTLST  E  "Attempted to queue a LIOX handle with an invalid(absent) result list"
0x10938eb3  LIOX  NOTREGOP  E  "Attempted to retreive register payload from a result item that does not contain a register response.  Opcode found = %d"
0x10958e8b  LIOX  NOCALLBK  E  "Attempted to queue a LIOX handle with a NULL result call back handler"
0x10a7f0d7  LIOX  MEMALIGN  E  "Specified memory pointer 0x%08x does not have proper alignment, %d LSB MBZ"
0x10b2f5fb  LIOX  BADOPCOD  E  "Error unknown %s opcode: %d"
0x11004397  AEM   RSPERR    E  "Summary comand/data error bit set in ACD response data"
0x11004af7  AEM   RSPPAR    E  "Parity error on ACD response data"
0x1180ec1b  TEM   TKRSUM    E  "TKR -- summary error bit set on response"
0x1180f3f7  TEM   TKRPAR    E  "TKR -- bad parity on response"
0x11824b1b  TEM   CALSUM    E  "CAL -- summary error bit set on response"
0x118252f7  TEM   CALPAR    E  "CAL -- bad parity on response"
0x18816d6d  LHK   LCBRST    W  "LCB rst process error: %s %x %x"
0x188173f1  LHK   LCBEXC    W  "LCB exec error: %s"
0x18817433  LHK   LCBINI    E  "LCB init error: %s"
0x1881a757  LHK   TSKSPWN   E  "Task spawn error: %s"
0x1881b34f  LHK   TSKEXIT   E  "Task exit error: %s"
0x1881b4cf  LHK   TSKINIT   E  "Task init error: %s"
0x18831a6f  LHK   SYSRSET   E  "System reset error: %s"
0x1883334f  LHK   SYSEXIT   E  "System exit error: %s"
0x188333a8  LHK   SUCCESS   S  "Success"
0x188334cf  LHK   SYSINIT   E  "System init error: %s %d"
0x1883dccf  LHK   TBLINIT   E  "Table init error: %s"
0x1885ca79  LHK   LCBNCLK   W  "LCB inactive: %s %x"
0x1887a651  LHK   DATPROC   W  "Data process error:%s %x"
0x1889fc13  LHK   MEMALOC   E  "Memory alloc error: %s"
0x188a248b  LHK   FAILURE   E  "Failure"
0x188aa321  LHK   CMDEXEC   W  "Command exec error: %s"
0x188ad0cf  LHK   CCBINIT   E  "CCB init error: %s"
0x188ade51  LHK   CCBPROC   W  "CCB processing error: %s"
0x188af4cf  LHK   CFGINIT   E  "Cfg file init error: %s %x"
0x188b01fb  LHK   CFGFILE   E  "Cfg file error: %s %x"
0x188d08cf  LHK   PKTINIT   E  "Packet init error: %s"
0x188d15d9  LHK   PKTFORM   W  "Packet creation error: %s %x"
0x188ec827  LHK   WUTCBER   E  "WUT callback error: %s"
0x21005033  PIG   NOSUP     E  "PIG does not support this feature at this time."
0x21005927  PIG   NOPDU     E  "No PDUs are selected for power"
0x210077f8  PIG   INMUD     S  "Happy as a pig in mud"
0x21009433  PIG   UNSUP     E  "Function unsupported"
0x210094db  PIG   TEMCFG    E  "Application of configuration would cause TEM %d to be powered from both PDUs"
0x21009727  PIG   TEMPWR    E  "Housekeeping reported an error when TEM %d was powered"
0x2100f627  PIG   TKRPWR    E  "Housekeeping reported an error when TKR %d was powered"
0x2101520b  PIG   RESFORK   E  "Failed creating result queue with error %08x"
0x210194db  PIG   ACDCFG    E  "Application of configuration would cause the ACD to be powered from both PDUs"
0x21019727  PIG   ACDPWR    E  "Housekeeping reported an error when the ACD was powered"
0x2101abdb  PIG   EPUCFG    E  "Application of configuration would cause EPU %d to be powered from both PDUs"
0x2101ae27  PIG   EPUPWR    E  "Housekeeping reported an error when EPU %d was powered"
0x21025527  PIG   CALPWR    E  "Housekeeping reported an error when CAL %d was powered"
0x210288b3  PIG   FNCALL    E  "Function call on line %d of function %s returned error %08x"
0x21032887  PIG   BADSIU    E  "Bad siu_id passed to PIG_lcb_start %d"
0x21032cbb  PIG   BADORD    E  "An attempt was made to reorder the order array with %d elements into a bad order (repeated or missing elements)"
0x210333a8  PIG   SUCCESS   S  "Success"
0x210399db  PIG   ERRREAD   E  "Error %x reading %s"
0x2103a79b  PIG   ERRLOAD   E  "Error %x executing load number %d"
0x2104269b  PIG   NTFYTSK   E  "Failed creating notify queue with error %08x"
0x2105dc73  PIG   LCBFAIL   E  "LCB failed to initialise: Final state was %d"
0x2106760b  PIG   EVTFORK   E  "Failed creating event queue with error %08x"
0x21092327  PIG   FREEPWR   E  "Houeskeeping reported an error when FREE board %d was powered"
0x210c9ddb  PIG   BADREAD   E  "Reading %s produced wrong result: 0x%x (received) != 0x%x (expected)"
0x2180136e  DAB   RESET     I  "dab reset word -- 32 bits %08x"
0x21809473  DAB   RSTFAIL   E  "gReset failed: %d"
0x2180a197  DAB   HWERR     E  "Error getting hardware info"
0x2180d097  DAB   PBERR     E  "Error starting playback"
0x21812197  DAB   LAMERR    E  "LAM error"
0x21814f83  DAB   NOIRQL    E  "No IRQ level"
0x21815003  DAB   NOIRQV    E  "No IRQ vector"
0x21815413  DAB   NOHNDL    E  "No GNAT handle"
0x21815797  DAB   LHPERR    E  "LATp header parity error"
0x21816b97  DAB   LCPERR    E  "LATP cell parity error"
0x21817097  DAB   LCBERR    E  "LCB error %d"
0x218193aa  DAB   ACCESS    I  "Access Descriptor: %08x"
0x21827d97  DAB   MEMERR    E  "Error allocating memory"
0x2182c3d6  DAB   PARITY    I  "Examining word %08x"
0x21833093  DAB   BADHWV    E  "Bad hardware version found"
0x218333a8  DAB   SUCCESS   S  "Success"
0x2185136f  DAB   LIOXRST   E  "LIOX LAT reset failed with status %08x"
0x2185a797  DAB   TRUNCERR  E  "LATp tuncate error"
0x21883a33  DAB   DABNULL   E  "DAB functions are not supported by this test-stand configuration"
0x21884412  DAB   DABHNDL   I  "dabHandle dab %08x"
0x21892997  DAB   CLOSERR   E  "Error closing gnatHandle"
0x21892c8e  DAB   CLOSEGH   I  "Preparing to close gnatHandle"
0x218aafc3  DAB   CMDCHNL   E  "Error setting command channel"
0x218aec73  DAB   PRBFAIL   E  "gProbe failed: %d"
0x218ba79a  DAB   PAYLOAD   I  "payload[%d] 16 bits %08x"
0x218c9ebb  DAB   BADSEND   E  "Bad gSend"
0x218cb813  DAB   BADHNDL   E  "Bad DAB handle: %d"
0x218cc45b  DAB   BADPARM   E  "Bad parameter"
0x218cc63f  DAB   BADGNAT   E  "Bad GNAT handle"
0x219097d6  DAB   LATPROTO  I  "Setting LATp protocol to %d"
0x21909b5a  DAB   LATPTIME  I  "Setting LATp timeout to %d"
0x2190a726  DAB   LATPADDR  I  "Setting LATp src addr to %08x"
0x2190b7c3  DAB   LATPCHNL  E  "Error setting LATp channel"
0x2190ba1a  DAB   LATPMODE  I  "Setting LATp mode to %d"
0x21938967  DAB   NOSRCADR  E  "No source address"
0x21945993  DAB   LIOXSYNC  E  "LIOX CSR sync failed with status %08x"
0x219468cf  DAB   LIOXINIT  E  "LIOX initialisation error"
0x21952726  DAB   LOGLADDR  I  "Logical address %08x"
0x2195b38b  DAB   NOFETURE  E  "Feature unavailable on this VME COMM board"
0x21969b67  DAB   NOVMEADR  E  "No VME address"
0x21971e03  DAB   LCBNORSP  E  "No response from the LCB"
0x219b6972  DAB   IRQSETUP  I  "Setting interrupts %08x %08x"
0x21a5eede  DAB   CLKSTART  I  "Starting clock on line 0"
0x21ae5c12  DAB   GNATHNDL  I  "gnatHandle gh   %08x"
0x270330db  FSW   BADCFG    E  "Bad configuration: %s"
0x270330ff  FSW   BADFFT    E  "FFT simulator failure: %s (%08x)"
0x270333a8  FSW   SUCCESS   S  "Success"
0x27800f2b  LIMP  STATE     E  "Operation illegal in current state %s (should be in state %s)"
0x27827987  LIMP  UNXEPU    E  "Unexpected EPU booted notification from EPU %d"
0x278333a8  LIMP  SUCCESS   S  "Success"
0x380333a8  CSDS  SUCCESS   S  "Success"
0x381afbfb  CSDS  EPKTTYPE  E  "Pkt type err: %04x"
0x381b15db  CSDS  EPKTFORM  E  "Pkt format err: %04x"
0x381b182b  CSDS  EPKTCKSM  E  "Pkt checksum err: %04x"
0x381b185b  CSDS  EPKTPARM  E  "Pkt function param err: %s"
0x388333a8  ZLIB  SUCCESS   S  "Success"
0x3893375b  ZLIB  ELIBSTRM  E  "ZLIB stream control err: %s"
0x3893522f  ZLIB  ELIBDATA  E  "ZLIB data format err: %s"
0x38935b57  ZLIB  ELIBUNKN  E  "ZLIB unknown err: %s"
0x38935bdf  ZLIB  ELIBMEMA  E  "ZLIB mem alloc err: %s"
0x3893639b  ZLIB  ELIBVERS  E  "ZLIB version err: %s"
0x38936bff  ZLIB  ELIBBUFF  E  "ZLIB buf err: %s"
0x389897df  ZLIB  EFILMEMA  E  "Mem alloc err: %u"
0x389899c7  ZLIB  EFILFILR  E  "File read err: %d"
0x389899cb  ZLIB  EFILFILS  E  "File seek err: %d"
0x389899cf  ZLIB  EFILFILT  E  "File stat err: %d"
0x38989a8b  ZLIB  EFILFILW  E  "File write err: %d"
0x38989c5b  ZLIB  EFILPARM  E  "File func param err: %s"
0x390333a8  FILE  SUCCESS   S  "Success"
0x3904506b  FILE  ESYSCHK   E  "File sys check err: %d"
0x391123bf  FILE  ESCPSTAT  E  "FILE SCP file status err: %s,%d"
0x391125db  FILE  ESCPREAD  E  "FILE SCP read err: %s,%d"
0x391138c3  FILE  ESYSDEVC  E  "File sys dev create err: %d"
0x39113d6f  FILE  ESYSFRMT  E  "File sys format err: %s, %d"
0x3911411f  FILE  ESYSMONT  E  "File sys mount err: %s, %d"
0x39114417  FILE  ESCPOPEN  E  "FILE SCP open err: %s,%d"
0x3911445b  FILE  ESYSPARM  E  "File sys function param err: %s"
0x391147df  FILE  ESCPMEMA  E  "FILE SCP mem alloc err: %s"
0x3913a3bf  FILE  ELCPSTAT  E  "FILE LCP state err: %d,%d"
0x3913c417  FILE  ELCPOPEN  E  "FILE LCP open err: %s,%d"
0x3913c49b  FILE  ELCPCLOS  E  "FILE LCP close err: %s,%d"
0x3913c7df  FILE  ELCPMEMA  E  "FILE LCP mem alloc err: %s"
0x3913d3cf  FILE  ELCPWRIT  E  "FILE LCP write err: %s,%d"
0x39168bdf  FILE  EHDRMEMA  E  "File hdr mem alloc err: %08x"
0x39168ddb  FILE  EHDRFORM  E  "File hdr format err: %04x"
0x3916902b  FILE  EHDRCKSM  E  "File hdr checksum err: %08x"
0x3916905b  FILE  EHDRPARM  E  "File hdr function param err: %s"
0x3918f3bf  FILE  EUPLSTAT  E  "File upl state err: %u"
0x39190aeb  FILE  EUPLAPID  E  "File upl TC pkt APID err: %hu"
0x391915cb  FILE  EUPLFSIZ  E  "File upl total size err: %u"
0x39191acb  FILE  EUPLPSIZ  E  "File upl TC pkt length err: %08x"
0x39191b67  FILE  EUPLFHDR  E  "File upl file hdr err: %08x"
0x39191c5b  FILE  EUPLPARM  E  "File upl function param err: %s"
0x39191cfb  FILE  EUPLFCOD  E  "File upl TC pkt func code err: %hu"
0x39191d6b  FILE  EUPLFCHK  E  "File upl file checksum err: %08x"
0x3919285b  FILE  EPATPARM  E  "File path function paramr err: %s"
0x391dc8ea  FILE  ILCPCOMM  I  "FILE LCP commit: %s"
0x3922f3b6  FILE  IUPLSTAR  I  "File upl start: %u"
0x3922f4ae  FILE  IUPLREST  I  "File upl reset %u"
0x39230e2e  FILE  IUPLDATA  I  "File upl data: %08x"
0x392318ea  FILE  IUPLCOMM  I  "File upl commit: %08x"
0x3a02de5c  CTDB  TIMEOUT   S  "Operation timeout"
0x3a0333a8  CTDB  SUCCESS   S  "Success"
0x3a05531b  CTDB  EDRVSYS   E  "Sys call error: %s, %d"
0x3a0559d3  CTDB  EDRVOBJ   E  "Driver object err: %s"
0x3a055bbb  CTDB  EDRVBRD   E  "Board hardware err: %s"
0x3a0585cb  CTDB  EDEVREG   E  "Dev reg err: %08x %04x %04x"
0x3a058e8b  CTDB  EDEVCMD   E  "Dev bus cmd err: %04x"
0x3a05915b  CTDB  EDEVBUS   E  "Dev bus msg err: %04x"
0x3a0e85c9  CTDB  WDEVREG   W  "Dev reg warn: %08x %04x %04x"
0x3a15479b  CTDB  EDRVTASK  E  "Driver task error: %s"
0x3a154b87  CTDB  EDRVTIMO  E  "Bus timeout err"
0x3a15661b  CTDB  EDRVCNFG  E  "Bus config err: %s"
0x3a1567df  CTDB  EDRVMEMA  E  "Memory alloc err: %s"
0x3a156c5b  CTDB  EDRVPARM  E  "Function paramr err: %s"
0x3a1619cf  CTDB  EDEVTAPF  E  "Dev address paritiy err: %04x"
0x3a161cef  CTDB  EDEVSYSF  E  "Dev SYSF err: %04x"
0x3a162ccf  CTDB  EDEVINIT  E  "Dev init err: %04x"
0x3a1633ff  CTDB  EDEVDMAF  E  "Dev DMA err: %04x"
0x3a1643bf  CTDB  EDEVBITF  E  "Dev BIT err: %04x"
0x3a16454f  CTDB  EDEVWRPF  E  "Dev wrap err: %04x"
0x3a1af75b  CTDB  EPKTSIZE  E  "Pkt size err: %u"
0x3a1b0873  CTDB  EPKTDROP  E  "Pkt drop err: %04x"
0x3a1b15db  CTDB  EPKTFORM  E  "Pkt format err: %04x"
0x3a2043d2  CTDB  IDEVWRAP  I  "Dev wrap info: %s"
0x3a3a43bd  CTDB  WDEVBITF  W  "Dev BIT warn: %04x"
0x7b0333a8  CTX   SUCCESS   S  "Success"
0x7b2e8ad7  CTX   GENERROR  E  "%s"
0x7b8333a8  CTS   SUCCESS   S  "Success"
0x7bae8ad7  CTS   GENERROR  E  "%s"
0x7e015858  ITC   NOFREE    S  "Don't free the queue item"
0x7e0333a8  ITC   SUCCESS   S  "Success"
0x7e2e8ad7  ITC   GENERROR  E  "%s"
0x7e8333a8  M2S   SUCCESS   S  "Success"
0x7e8a9417  M2S   FILOPEN   E  "Error opening file %s"
0x7e8cd263  M2S   BADQUAL   E  "Cannot parse qualifier \"%s\""
0x7e943873  M2S   ALOCFAIL  E  "Cannot allocate %d bytes for %s"
0x7ea555db  M2S   DUPMSGNM  E  "Duplicate message name %s"
0x7ea5566b  M2S   DUPMSGID  E  "Duplicate message IDs for names %s and %s"
0x7eaa529b  M2S   FILCLOSE  E  "Error closing file %s"
0x7eaa8f6b  M2S   FILWRITE  E  "Error writing file %s"
0x7eb29197  M2S   BADTOKEN  E  "Cannot parse token \"%s\""
0x7eb2c05b  M2S   BADNPARM  E  "Too %s parameters to %s command"
0x7eb2fc17  M2S   BADFLLEN  E  "%s too short to be the name of a .msg file"
0x7eb2fcbb  M2S   BADFLNAM  E  "%s does not end with file extension .msg"
0x7eb302ef  M2S   BADFLFMT  E  "%s is not a .msg file"
0x7eba4d7f  M2S   QULNEGAT  E  "Qualifier --%s is not negatable"
0x7eba5923  M2S   QULNOVAL  E  "Qualifier --%s always takes a value"
0x7eba98ef  M2S   QULUNDEF  E  "Qualifier %s not recognized"
0x7ebac47b  M2S   QULVALUD  E  "Qualifier --%s never takes a value"
0x7f0308bb  MSG   GAPEND    E  "Message blackout ends (%d messages dropped)"
0x7f0333a8  MSG   SUCCESS   S  "Success"
0x7f094bbb  MSG   TNM2LONG  E  "A task name is restricted to <= %d letters"
0x7f0d2c6b  MSG   PKT2FEW   E  "Initialization parameter packet count too small"
0x7f143873  MSG   ALOCFAIL  E  "Could not allocate %d bytes"
0x7f21b0fb  MSG   OUTNTFND  E  "Target of MSG_deletOutputRtn() not found"
0x7f268bd7  MSG   UNIXEROR  E  "Unrecognised message 0x%08x (possibly unix error)"
0x7f26ae38  MSG   UNIXGOOD  S  "Unrecognised message 0x%08x (possibly unix success)"
0x7f277a58  MSG   UNKNOWNS  S  "Unrecognised message 0x%08x (success)"
0x7f277a8b  MSG   UNKNOWNE  E  "Unrecognised message 0x%08x (error)"
0x7f277ab2  MSG   UNKNOWNI  I  "Unrecognised message 0x%08x (information)"
0x7f277b19  MSG   UNKNOWNW  W  "Unrecognised message 0x%08x (warning)"
0x7f2a3073  MSG   FORKFAIL  E  "Forking the message task failed"
0x7f2a6073  MSG   FINDFAIL  E  "Cannot find alternate messages in message database"
0x7f2e7873  MSG   FPAIFAIL  E  "FPA initialization failed"
0x7f2ec073  MSG   FPAGFAIL  E  "FPA_get() failed during start"
0x7f310e37  MSG   GAPBEGIN  E  "Message blackout starts (trying to report 0x%08x)"
0x7f326f2b  MSG   BADSTATE  E  "Request illegal in current state of message"
0x7f3493a3  MSG   PKT2SMAL  E  "Initialization parameter packet length too small"
