\hypertarget{ADCSIM_8c}{ \section{ADCSIM.c File Reference} \label{ADCSIM_8c}\index{ADCSIM.c@{ADCSIM.c}} } Routines to provide simulation of hardware ADC values. {\tt \#include $<$stdio.h$>$}\par {\tt \#include $<$string.h$>$}\par {\tt \#include $<$stdlib.h$>$}\par {\tt \#include \char`\"{}PBS/BSWP.h\char`\"{}}\par {\tt \#include \char`\"{}PBI/Endianness.h\char`\"{}}\par {\tt \#include \char`\"{}LCBD/LCBD\_\-cr.h\char`\"{}}\par {\tt \#include \char`\"{}LCBD/LCBC.h\char`\"{}}\par {\tt \#include \char`\"{}LCBD/LCBR.h\char`\"{}}\par {\tt \#include \char`\"{}LEM/defs.h\char`\"{}}\par {\tt \#include \char`\"{}LEM/encode\_\-structs.h\char`\"{}}\par {\tt \#include \char`\"{}FILE/FILE\_\-path.h\char`\"{}}\par {\tt \#include \char`\"{}ADCSIM\_\-prvdefs.h\char`\"{}}\par {\tt \#include \char`\"{}ADCSIM/ADCSIM\_\-pubdefs.h\char`\"{}}\par {\tt \#include \char`\"{}CLI/CLI\_\-pubdefs.h\char`\"{}}\par Include dependency graph for ADCSIM.c:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=230pt]{ADCSIM_8c__incl} \end{center} \end{figure} \subsection*{Functions} \begin{CompactItemize} \item unsigned int \hyperlink{ADCSIM_8c_a4}{LCBD\_\-submit} (LCBD\_\-xcb $\ast$xcb) \begin{CompactList}\small\item\em Simulate execution of command list. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a5}{ADCSIM\_\-set\-Tem\-Env\-Data} (unsigned short tem, unsigned short mux, unsigned short adc, unsigned short val) \begin{CompactList}\small\item\em Sets a value in the simulated TEM environmental register block. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a6}{ADCSIM\_\-set\-Pdu\-Env\-Data} (unsigned short grp, unsigned short bank, unsigned short adc, unsigned int val) \begin{CompactList}\small\item\em Sets a value in the simulated PDU environmental register block. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a7}{ADCSIM\_\-set\-Aem\-Env\-Data} (unsigned short free, unsigned short adc, unsigned short val) \begin{CompactList}\small\item\em Sets a value in the simulated AEM environmental register block. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a8}{ADCSIM\_\-set\-Pdu\-Pwr\-Data} (unsigned short reg, unsigned short val) \begin{CompactList}\small\item\em Sets a value in the simulated PDU power status register block. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a9}{ADCSIM\_\-set\-Aem\-Pwr\-Data} (unsigned int val) \begin{CompactList}\small\item\em Sets a value in the simulated AEM power status register. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a10}{ADCSIM\_\-set\-Tem\-Busy\-Data} (unsigned short tem, unsigned short val0, unsigned short val1) \begin{CompactList}\small\item\em Sets a value in the simulated TEM busy/dead time register block. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a11}{ADCSIM\_\-set\-Gem\-Lrs\-Data} (unsigned short reg, unsigned short val0, unsigned short val1) \begin{CompactList}\small\item\em Sets a value in the simulated GEM low-rate science register block. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a12}{ADCSIM\_\-set\-Tem\-Env\-Data\_\-cli} (CLI\_\-Control $\ast$cli, void $\ast$prm) \begin{CompactList}\small\item\em Handle the verb/call. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a13}{ADCSIM\_\-set\-Pdu\-Env\-Data\_\-cli} (CLI\_\-Control $\ast$cli, void $\ast$prm) \begin{CompactList}\small\item\em Handle the verb/call. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a14}{ADCSIM\_\-set\-Aem\-Env\-Data\_\-cli} (CLI\_\-Control $\ast$cli, void $\ast$prm) \begin{CompactList}\small\item\em Handle the verb/call. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a15}{ADCSIM\_\-set\-Pdu\-Pwr\-Data\_\-cli} (CLI\_\-Control $\ast$cli, void $\ast$prm) \begin{CompactList}\small\item\em Handle the verb/call. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a16}{ADCSIM\_\-set\-Aem\-Pwr\-Data\_\-cli} (CLI\_\-Control $\ast$cli, void $\ast$prm) \begin{CompactList}\small\item\em Handle the verb/call. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a17}{ADCSIM\_\-set\-Tem\-Busy\-Data\_\-cli} (CLI\_\-Control $\ast$cli, void $\ast$prm) \begin{CompactList}\small\item\em Handle the verb/call. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a18}{ADCSIM\_\-set\-Gem\-Lrs\-Data\_\-cli} (CLI\_\-Control $\ast$cli, void $\ast$prm) \begin{CompactList}\small\item\em Handle the verb/call. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a19}{ADCSIM\_\-set\-Sib\-Path\_\-cli} (CLI\_\-Control $\ast$cli, void $\ast$prm) \begin{CompactList}\small\item\em Handle the verb/call. \item\end{CompactList}\item unsigned int \hyperlink{ADCSIM_8c_a20}{ADCSIM\_\-add\-Syntax\-LCP} (CLI\_\-Syntax $\ast$syntax) \begin{CompactList}\small\item\em Contribute commands to the CLI syntax. \item\end{CompactList}\end{CompactItemize} \subsection*{Variables} \begin{CompactItemize} \item \hypertarget{ADCSIM_8c_a0}{ unsigned short \hyperlink{ADCSIM_8c_a0}{pdu\_\-grp}} \label{ADCSIM_8c_a0} \begin{CompactList}\small\item\em PDU environmental group register. \item\end{CompactList}\item \hypertarget{ADCSIM_8c_a1}{ unsigned short \hyperlink{ADCSIM_8c_a1}{tem\_\-mux} \mbox{[}16\mbox{]}} \label{ADCSIM_8c_a1} \begin{CompactList}\small\item\em TEM mux registers. \item\end{CompactList}\item \hypertarget{ADCSIM_8c_a2}{ unsigned short \hyperlink{ADCSIM_8c_a2}{free\_\-board}} \label{ADCSIM_8c_a2} \begin{CompactList}\small\item\em AEM free board register. \item\end{CompactList}\item \hypertarget{ADCSIM_8c_a3}{ const char $\ast$ \hyperlink{ADCSIM_8c_a3}{d\_\-0} = \char`\"{}\$0\char`\"{}} \label{ADCSIM_8c_a3} \begin{CompactList}\small\item\em The string \char`\"{}\$0\char`\"{}. \item\end{CompactList}\end{CompactItemize} \subsection{Detailed Description} Routines to provide simulation of hardware ADC values. \subsection{Function Documentation} \hypertarget{ADCSIM_8c_a20}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_addSyntaxLCP@{ADCSIM\_\-addSyntaxLCP}} \index{ADCSIM_addSyntaxLCP@{ADCSIM\_\-addSyntaxLCP}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-addSyntaxLCP]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-add\-Syntax\-LCP (CLI\_\-Syntax $\ast$ {\em syntax})}} \label{ADCSIM_8c_a20} Contribute commands to the CLI syntax. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em syntax}]Syntax handle\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} Here is the call graph for this function:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=289pt]{ADCSIM_8c_a20_cgraph} \end{center} \end{figure} \hypertarget{ADCSIM_8c_a7}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setAemEnvData@{ADCSIM\_\-setAemEnvData}} \index{ADCSIM_setAemEnvData@{ADCSIM\_\-setAemEnvData}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setAemEnvData]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Aem\-Env\-Data (unsigned short {\em free}, unsigned short {\em adc}, unsigned short {\em val})}} \label{ADCSIM_8c_a7} Sets a value in the simulated AEM environmental register block. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em free}]FREE board ID \item[{\em adc}]Adc number \item[{\em val}]Register value \end{description} \end{Desc} \hypertarget{ADCSIM_8c_a14}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setAemEnvData_cli@{ADCSIM\_\-setAemEnvData\_\-cli}} \index{ADCSIM_setAemEnvData_cli@{ADCSIM\_\-setAemEnvData\_\-cli}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setAemEnvData\_\-cli]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Aem\-Env\-Data\_\-cli (CLI\_\-Control $\ast$ {\em cli}, void $\ast$ {\em prm})\hspace{0.3cm}{\tt \mbox{[}static\mbox{]}}}} \label{ADCSIM_8c_a14} Handle the verb/call. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em cli}]Opaque control pointer \item[{\em prm}]User context parameter (unused)\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} Here is the call graph for this function:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=199pt]{ADCSIM_8c_a14_cgraph} \end{center} \end{figure} \hypertarget{ADCSIM_8c_a9}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setAemPwrData@{ADCSIM\_\-setAemPwrData}} \index{ADCSIM_setAemPwrData@{ADCSIM\_\-setAemPwrData}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setAemPwrData]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Aem\-Pwr\-Data (unsigned int {\em val})}} \label{ADCSIM_8c_a9} Sets a value in the simulated AEM power status register. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em val}]Register value \end{description} \end{Desc} \hypertarget{ADCSIM_8c_a16}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setAemPwrData_cli@{ADCSIM\_\-setAemPwrData\_\-cli}} \index{ADCSIM_setAemPwrData_cli@{ADCSIM\_\-setAemPwrData\_\-cli}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setAemPwrData\_\-cli]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Aem\-Pwr\-Data\_\-cli (CLI\_\-Control $\ast$ {\em cli}, void $\ast$ {\em prm})\hspace{0.3cm}{\tt \mbox{[}static\mbox{]}}}} \label{ADCSIM_8c_a16} Handle the verb/call. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em cli}]Opaque control pointer \item[{\em prm}]User context parameter (unused)\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} Here is the call graph for this function:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=199pt]{ADCSIM_8c_a16_cgraph} \end{center} \end{figure} \hypertarget{ADCSIM_8c_a11}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setGemLrsData@{ADCSIM\_\-setGemLrsData}} \index{ADCSIM_setGemLrsData@{ADCSIM\_\-setGemLrsData}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setGemLrsData]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Gem\-Lrs\-Data (unsigned short {\em reg}, unsigned short {\em val0}, unsigned short {\em val1})}} \label{ADCSIM_8c_a11} Sets a value in the simulated GEM low-rate science register block. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em reg}]register number: 0 - 3 \item[{\em val0}]register value \item[{\em val1}]register value \end{description} \end{Desc} \hypertarget{ADCSIM_8c_a18}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setGemLrsData_cli@{ADCSIM\_\-setGemLrsData\_\-cli}} \index{ADCSIM_setGemLrsData_cli@{ADCSIM\_\-setGemLrsData\_\-cli}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setGemLrsData\_\-cli]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Gem\-Lrs\-Data\_\-cli (CLI\_\-Control $\ast$ {\em cli}, void $\ast$ {\em prm})\hspace{0.3cm}{\tt \mbox{[}static\mbox{]}}}} \label{ADCSIM_8c_a18} Handle the verb/call. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em cli}]Opaque control pointer \item[{\em prm}]User context parameter (unused)\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} Here is the call graph for this function:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=195pt]{ADCSIM_8c_a18_cgraph} \end{center} \end{figure} \hypertarget{ADCSIM_8c_a6}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setPduEnvData@{ADCSIM\_\-setPduEnvData}} \index{ADCSIM_setPduEnvData@{ADCSIM\_\-setPduEnvData}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setPduEnvData]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Pdu\-Env\-Data (unsigned short {\em grp}, unsigned short {\em bank}, unsigned short {\em adc}, unsigned int {\em val})}} \label{ADCSIM_8c_a6} Sets a value in the simulated PDU environmental register block. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em grp}]PDU group number \item[{\em bank}]Environmental register bank 0 - 2 \item[{\em adc}]Adc number \item[{\em val}]Register value \end{description} \end{Desc} \hypertarget{ADCSIM_8c_a13}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setPduEnvData_cli@{ADCSIM\_\-setPduEnvData\_\-cli}} \index{ADCSIM_setPduEnvData_cli@{ADCSIM\_\-setPduEnvData\_\-cli}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setPduEnvData\_\-cli]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Pdu\-Env\-Data\_\-cli (CLI\_\-Control $\ast$ {\em cli}, void $\ast$ {\em prm})\hspace{0.3cm}{\tt \mbox{[}static\mbox{]}}}} \label{ADCSIM_8c_a13} Handle the verb/call. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em cli}]Opaque control pointer \item[{\em prm}]User context parameter (unused)\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} Here is the call graph for this function:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=195pt]{ADCSIM_8c_a13_cgraph} \end{center} \end{figure} \hypertarget{ADCSIM_8c_a8}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setPduPwrData@{ADCSIM\_\-setPduPwrData}} \index{ADCSIM_setPduPwrData@{ADCSIM\_\-setPduPwrData}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setPduPwrData]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Pdu\-Pwr\-Data (unsigned short {\em reg}, unsigned short {\em val})}} \label{ADCSIM_8c_a8} Sets a value in the simulated PDU power status register block. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em reg}]PDU power register number: 0 - 2 \item[{\em val}]Register value \end{description} \end{Desc} \hypertarget{ADCSIM_8c_a15}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setPduPwrData_cli@{ADCSIM\_\-setPduPwrData\_\-cli}} \index{ADCSIM_setPduPwrData_cli@{ADCSIM\_\-setPduPwrData\_\-cli}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setPduPwrData\_\-cli]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Pdu\-Pwr\-Data\_\-cli (CLI\_\-Control $\ast$ {\em cli}, void $\ast$ {\em prm})\hspace{0.3cm}{\tt \mbox{[}static\mbox{]}}}} \label{ADCSIM_8c_a15} Handle the verb/call. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em cli}]Opaque control pointer \item[{\em prm}]User context parameter (unused)\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} Here is the call graph for this function:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=193pt]{ADCSIM_8c_a15_cgraph} \end{center} \end{figure} \hypertarget{ADCSIM_8c_a19}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setSibPath_cli@{ADCSIM\_\-setSibPath\_\-cli}} \index{ADCSIM_setSibPath_cli@{ADCSIM\_\-setSibPath\_\-cli}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setSibPath\_\-cli]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Sib\-Path\_\-cli (CLI\_\-Control $\ast$ {\em cli}, void $\ast$ {\em prm})\hspace{0.3cm}{\tt \mbox{[}static\mbox{]}}}} \label{ADCSIM_8c_a19} Handle the verb/call. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em cli}]Opaque control pointer \item[{\em prm}]User context parameter (unused)\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} \hypertarget{ADCSIM_8c_a10}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setTemBusyData@{ADCSIM\_\-setTemBusyData}} \index{ADCSIM_setTemBusyData@{ADCSIM\_\-setTemBusyData}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setTemBusyData]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Tem\-Busy\-Data (unsigned short {\em tem}, unsigned short {\em val0}, unsigned short {\em val1})}} \label{ADCSIM_8c_a10} Sets a value in the simulated TEM busy/dead time register block. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em tem}]TEM ID \item[{\em val0}]LSB 16 bits of register value \item[{\em val1}]MSB 16 bits of register value \end{description} \end{Desc} \hypertarget{ADCSIM_8c_a17}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setTemBusyData_cli@{ADCSIM\_\-setTemBusyData\_\-cli}} \index{ADCSIM_setTemBusyData_cli@{ADCSIM\_\-setTemBusyData\_\-cli}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setTemBusyData\_\-cli]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Tem\-Busy\-Data\_\-cli (CLI\_\-Control $\ast$ {\em cli}, void $\ast$ {\em prm})\hspace{0.3cm}{\tt \mbox{[}static\mbox{]}}}} \label{ADCSIM_8c_a17} Handle the verb/call. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em cli}]Opaque control pointer \item[{\em prm}]User context parameter (unused)\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} Here is the call graph for this function:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=201pt]{ADCSIM_8c_a17_cgraph} \end{center} \end{figure} \hypertarget{ADCSIM_8c_a5}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setTemEnvData@{ADCSIM\_\-setTemEnvData}} \index{ADCSIM_setTemEnvData@{ADCSIM\_\-setTemEnvData}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setTemEnvData]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Tem\-Env\-Data (unsigned short {\em tem}, unsigned short {\em mux}, unsigned short {\em adc}, unsigned short {\em val})}} \label{ADCSIM_8c_a5} Sets a value in the simulated TEM environmental register block. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em tem}]TEM ID \item[{\em mux}]Mux channel number \item[{\em adc}]Adc number \item[{\em val}]Register value \end{description} \end{Desc} \hypertarget{ADCSIM_8c_a12}{ \index{ADCSIM.c@{ADCSIM.c}!ADCSIM_setTemEnvData_cli@{ADCSIM\_\-setTemEnvData\_\-cli}} \index{ADCSIM_setTemEnvData_cli@{ADCSIM\_\-setTemEnvData\_\-cli}!ADCSIM.c@{ADCSIM.c}} \subsubsection[ADCSIM\_\-setTemEnvData\_\-cli]{\setlength{\rightskip}{0pt plus 5cm}unsigned int ADCSIM\_\-set\-Tem\-Env\-Data\_\-cli (CLI\_\-Control $\ast$ {\em cli}, void $\ast$ {\em prm})\hspace{0.3cm}{\tt \mbox{[}static\mbox{]}}}} \label{ADCSIM_8c_a12} Handle the verb/call. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em cli}]Opaque control pointer \item[{\em prm}]User context parameter (unused)\end{description} \end{Desc} \begin{Desc} \item[Return values:] \begin{description} \item[{\em CLI\_\-SUCCESS}]\end{description} \end{Desc} Here is the call graph for this function:\begin{figure}[H] \begin{center} \leavevmode \includegraphics[width=197pt]{ADCSIM_8c_a12_cgraph} \end{center} \end{figure} \hypertarget{ADCSIM_8c_a4}{ \index{ADCSIM.c@{ADCSIM.c}!LCBD_submit@{LCBD\_\-submit}} \index{LCBD_submit@{LCBD\_\-submit}!ADCSIM.c@{ADCSIM.c}} \subsubsection[LCBD\_\-submit]{\setlength{\rightskip}{0pt plus 5cm}unsigned int LCBD\_\-submit (LCBD\_\-xcb $\ast$ {\em xcb})}} \label{ADCSIM_8c_a4} Simulate execution of command list. \begin{Desc} \item[Parameters:] \begin{description} \item[{\em xcb}]- LCB transaction ctl blk \end{description} \end{Desc}