\hypertarget{SIB_8c}{
\section{SIB.c File Reference}
\label{SIB_8c}\index{SIB.c@{SIB.c}}
}
Function definitions for SIB utility driver.  


{\tt \#include \char`\"{}vx\-Works.h\char`\"{}}\par
{\tt \#include \char`\"{}pci.h\char`\"{}}\par
{\tt \#include \char`\"{}mv2600.h\char`\"{}}\par
{\tt \#include \char`\"{}drv/pci/pci\-Config\-Lib.h\char`\"{}}\par
{\tt \#include \char`\"{}drv/sib/sib.h\char`\"{}}\par
{\tt \#include \char`\"{}SIB/SIB.h\char`\"{}}\par
{\tt \#include \char`\"{}MSG/MSG\_\-pubdefs.h\char`\"{}}\par


Include dependency graph for SIB.c:\begin{figure}[H]
\begin{center}
\leavevmode
\includegraphics[width=331pt]{SIB_8c__incl}
\end{center}
\end{figure}
\subsection*{Defines}
\begin{CompactItemize}
\item 
\#define \hyperlink{SIB_8c_a0}{SIB\_\-MSG}(\_\-status, \_\-param)\ \_\-msg\_\-report((\_\-status), 0, 1, (\_\-param))
\item 
\#define \hyperlink{SIB_8c_a1}{SIB\_\-NULL\_\-ADDR}\ 0xffffffff
\item 
\#define \hyperlink{SIB_8c_a2}{SIB\_\-SUMT\_\-REG\_\-SIZE}\ 0x80
\end{CompactItemize}
\subsection*{Functions}
\begin{CompactItemize}
\item 
unsigned int \hyperlink{SIB_8c_a3}{SIB\_\-query} (\hyperlink{struct__SIB__Info}{SIB\_\-Info} $\ast$info)
\begin{CompactList}\small\item\em Get SIB addressing information. \item\end{CompactList}\end{CompactItemize}


\subsection{Detailed Description}
Function definitions for SIB utility driver. 

\begin{Desc}
\item[Author:]D.L. Wood\end{Desc}


\subsection{Define Documentation}
\hypertarget{SIB_8c_a0}{
\index{SIB.c@{SIB.c}!SIB_MSG@{SIB\_\-MSG}}
\index{SIB_MSG@{SIB\_\-MSG}!SIB.c@{SIB.c}}
\subsubsection[SIB\_\-MSG]{\setlength{\rightskip}{0pt plus 5cm}\#define SIB\_\-MSG(\_\-status, \_\-param)\ \_\-msg\_\-report((\_\-status), 0, 1, (\_\-param))}}
\label{SIB_8c_a0}


Configuration-dependent message signaller. For boot configuration, a no-op. For application configuration, calls MSG\_\-signal().

\begin{Desc}
\item[Parameters:]
\begin{description}
\item[{\em \_\-status}]The variable holding the status code. \item[{\em \_\-param}]The message specific parameter value. \end{description}
\end{Desc}
\hypertarget{SIB_8c_a1}{
\index{SIB.c@{SIB.c}!SIB_NULL_ADDR@{SIB\_\-NULL\_\-ADDR}}
\index{SIB_NULL_ADDR@{SIB\_\-NULL\_\-ADDR}!SIB.c@{SIB.c}}
\subsubsection[SIB\_\-NULL\_\-ADDR]{\setlength{\rightskip}{0pt plus 5cm}\#define SIB\_\-NULL\_\-ADDR\ 0xffffffff}}
\label{SIB_8c_a1}


A value to use for a missing register address. \hypertarget{SIB_8c_a2}{
\index{SIB.c@{SIB.c}!SIB_SUMT_REG_SIZE@{SIB\_\-SUMT\_\-REG\_\-SIZE}}
\index{SIB_SUMT_REG_SIZE@{SIB\_\-SUMT\_\-REG\_\-SIZE}!SIB.c@{SIB.c}}
\subsubsection[SIB\_\-SUMT\_\-REG\_\-SIZE]{\setlength{\rightskip}{0pt plus 5cm}\#define SIB\_\-SUMT\_\-REG\_\-SIZE\ 0x80}}
\label{SIB_8c_a2}


The size in bytes of the Summit internal register memory space. 

\subsection{Function Documentation}
\hypertarget{SIB_8c_a3}{
\index{SIB.c@{SIB.c}!SIB_query@{SIB\_\-query}}
\index{SIB_query@{SIB\_\-query}!SIB.c@{SIB.c}}
\subsubsection[SIB\_\-query]{\setlength{\rightskip}{0pt plus 5cm}unsigned int SIB\_\-query (\hyperlink{struct__SIB__Info}{SIB\_\-Info} $\ast$ {\em info})}}
\label{SIB_8c_a3}


Get SIB addressing information. 

Obtain the addresses and sizes of the SIB board memory regions and registers. The BSP function pci\-Find\-Device() is used to scan the bus for an SIB board. Both the flight/EM model and evaluation model SIB boards are recognized. This function only supports a single instance of the SIB board on the PCI bus, so the first board found is queried. The {\em info\/} structure is filled in with the SIB hardware values upon success. Because the evaluation model SIB board does not include the PDU/GASU or heater control hardware, those registers are marked with address 0xffffffff.

\begin{Desc}
\item[Parameters:]
\begin{description}
\item[{\em info}]Pointer to an SIB information structure filled in upon return.\end{description}
\end{Desc}