********** ** 18 **HESSE ********** FCN= 7789.827 FROM HESSE STATUS=OK 255 CALLS 1216 TOTAL EDM= .12E-08 STRATEGY= 1 ERROR MATRIX ACCURATE EXT PARAMETER INTERNAL INTERNAL NO. NAME VALUE ERROR STEP SIZE VALUE 1 Prefactor .27756E-09 46.173 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 2 norm 1.1521 2.0034 .10754E-02 -1.5686 3 norm .0000 1.8412 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 4 Prefactor .0000 4.1395 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 5 Prefactor .60947 76.351 .74757E-03 -1.5692 6 norm .34305 .32062 .96405E-03 -1.5696 7 norm .41467 .99101 .28171E-02 -1.5695 8 Prefactor .0000 8.6177 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 9 Prefactor .0000 2.1312 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 10 Prefactor .55511E-10 7.6341 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 11 Prefactor .11102E-09 17.719 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 12 norm 1.5419 .66815 .85806E-03 -1.5683 13 Prefactor .0000 3.2126 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 14 Prefactor .55511E-10 7.2455 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 15 norm 2.0779 2.6505 .71637E-03 -1.5679 16 Normalizat 1.0530 .18907 .67899E-01 -.91275 17 Prefactor 1.0597 .11986 .39372E-01 -.90767 ERR DEF= .500 Minuit fit quality: 3 estimated distance: 1.24067e-09 Minuit parameter uncertainties: 1 0.000234943 2 2.00338 3 2.9295e-06 4 4.15656e-06 5 13.6433 6 0.320624 7 0.991014 8 2.1393e-05 9 1.87719e-06 10 4.19208e-05 11 8.13413e-05 12 0.668151 13 1.59787e-05 14 3.41441e-05 15 2.65052 16 0.189189 17 0.119889 Done. MINUIT Return Code (Fixed Index): 0 logL (Fixed Index) = 7789.82666297 Extracting fit parameters... 4FGL J0115.1+2622 Spectrum: PowerLaw 240 Prefactor: 0.000e+00 2.139e-05 0.000e+00 1.000e+06 ( 1.000e-14) 241 Index: 2.211e+00 0.000e+00 0.000e+00 1.000e+01 (-1.000e+00) fixed 242 Scale: 2.453e+03 0.000e+00 3.000e+01 5.000e+05 ( 1.000e+00) fixed GAL_V02 Spectrum: PowerLaw 532 Prefactor: 1.060e+00 1.199e-01 0.000e+00 1.000e+01 ( 1.000e+00) 533 Index: 0.000e+00 0.000e+00 -1.000e+00 1.000e+00 ( 1.000e+00) fixed 534 Scale: 1.000e+02 0.000e+00 5.000e+01 2.000e+02 ( 1.000e+00) fixed EG_v02 Spectrum: FileFunction 531 Normalization: 1.053e+00 1.892e-01 1.000e-02 1.000e+01 ( 1.000e+00) TS (Fixed Index): 0.00 Ra Dec: 18.778 26.373 Photon Flux Upper Limit: 4.36788848528e-08 ph cm-2 s-1 Energy Flux Upper Limit: 0.00333072525564 MeV cm-2 s-1 Saving results to: /lscratch/kocevski/28935158/likelihoodResults_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.txt Performing a free index iterative likelihood fit... Freezing all point sources, except source of interest... Done. Freeing candidate source... Done. Fit tolerance = 1 Performing likelihood fit... Done. MINUIT Return Code (Free Index): 102 logL (Free Index) = 7789.88210283 delta logL = -0.0554398545228 Fit tolerance = 0.0001 Performing likelihood fit... Done. MINUIT Return Code (Free Index): 102 logL (Free Index) = 7789.82666313 delta logL = -1.60018316819e-07 Fit tolerance = 1e-08 Performing likelihood fit... ********** ** 14 **SET NOWARN ********** PARAMETER DEFINITIONS: NO. NAME VALUE STEP SIZE LIMITS 1 'Prefactor ' .30090E-05 1.0000 .0000 .10000E+07 2 'Index ' .99689 1.0000 .0000 10.000 3 'Normalizat' 1.0530 1.0000 .10000E-01 10.000 4 'Prefactor ' 1.0597 1.0000 .0000 10.000 ********** ** 15 **SET ERR .5000 ********** ********** ** 16 **SET GRAD 1.000 ********** ********** ** 17 **MINIMIZE .5350E+05 .2000E-04 ********** MIGRAD MINIMIZATION HAS CONVERGED. MIGRAD WILL VERIFY CONVERGENCE AND ERROR MATRIX. MNHESS FAILS AND WILL RETURN DIAGONAL MATRIX. FCN= 7789.827 FROM MIGRAD STATUS=CONVERGED 37 CALLS 238 TOTAL EDM= .23E-10 STRATEGY=1 ERROR MATRIX UNCERTAINTY=100.0% EXT PARAMETER APPROXIMATE STEP FIRST NO. NAME VALUE ERROR SIZE DERIVATIVE 1 Prefactor .0000 13.906 .42118E-03** at limit ** 2 Index 1.7309 1.6873 .85102E-04 .0000 3 Normalizat 1.0530 1.1996 -.13711E-05 -.17460E-03 4 Prefactor 1.0597 1.1809 -.71167E-07 -.26202E-03 ERR DEF= .500 Final values: Prefactor = 0 Index = 1.7309 Normalizat = 1.05302 Prefactor = 1.05965 ********** ** 18 **HESSE ********** MNHESS FAILS AND WILL RETURN DIAGONAL MATRIX. FCN= 7789.827 FROM HESSE STATUS=FAILED 9 CALLS 247 TOTAL EDM= .23E-10 STRATEGY=1 ERROR MATRIX UNCERTAINTY=100.0% EXT PARAMETER APPROXIMATE INTERNAL INTERNAL NO. NAME VALUE ERROR STEP SIZE VALUE 1 Prefactor .0000 13.906 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 2 Index .30001 1.7740 .85102E-04 -.71262 3 Normalizat 1.0530 1.1996 -.13711E-05 -.91275 4 Prefactor 1.0597 1.1809 -.71167E-07 -.90767 ERR DEF= .500 Minuit fit quality: 1 estimated distance: 2.25034e-11 Minuit parameter uncertainties: 1 2.2176e-05 2 1.74893 3 1.23283 4 1.21194 /sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/pyfits/__init__.py:22: PyFITSDeprecationWarning: PyFITS is deprecated, please use astropy.io.fits PyFITSDeprecationWarning) # noqa Likelihood Analysis Tool Support Contact: Daniel Kocevski (daniel.kocevski@nasa.gov) Importing modules... This is make3FGLxml version 01r0. The default diffuse model files and names are for pass 8 and assume you have v10r00p05 of the Fermi Science Tools or higher. This is make4FGLDR3xml version 01r09. The default diffuse model files and names are for P8R3, 4FGL DRs, and the default fermitools directory locations. WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). /sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/matplotlib/cbook/deprecation.py:106: MatplotlibDeprecationWarning: The mpl_toolkits.axes_grid module was deprecated in version 2.1. Use mpl_toolkits.axes_grid1 and mpl_toolkits.axisartist provies the same functionality instead. warnings.warn(message, mplDeprecation, stacklevel=1) Done. MINUIT Return Code (Free Index): 101 logL (Free Index) = 7789.82666297 delta logL = -9.09494701773e-12 Extracting fit parameters... 4FGL J0115.1+2622 Spectrum: PowerLaw 240 Prefactor: 0.000e+00 2.218e-05 0.000e+00 1.000e+06 ( 1.000e-14) 241 Index: 1.731e+00 1.749e+00 0.000e+00 1.000e+01 (-1.000e+00) 242 Scale: 2.453e+03 0.000e+00 3.000e+01 5.000e+05 ( 1.000e+00) fixed GAL_V02 Spectrum: PowerLaw 532 Prefactor: 1.060e+00 1.212e+00 0.000e+00 1.000e+01 ( 1.000e+00) 533 Index: 0.000e+00 0.000e+00 -1.000e+00 1.000e+00 ( 1.000e+00) fixed 534 Scale: 1.000e+02 0.000e+00 5.000e+01 2.000e+02 ( 1.000e+00) fixed EG_v02 Spectrum: FileFunction 531 Normalization: 1.053e+00 1.233e+00 1.000e-02 1.000e+01 ( 1.000e+00) TS (Free Index): 0.00 Ra Dec: 18.778 26.373 Creating a high resolution counts map... INFO: Auto-setting vmin to -1.000e-01 [aplpy.core] INFO: Auto-setting vmax to 1.110e+00 [aplpy.core] Saving /lscratch/kocevski/28935158/cmap_HighResolution_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.png Cleaning up... ** Nuclear option initiated! ** Updating database... UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:01:34.436607', job_id='28935158', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='1781640094.44', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:01:34.436607', job_id='28935158', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='1781640094.44', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Traceback (most recent call last): File "/sdf/data/fermi/g/LCRepository/Likelihood/Scripts/DatabaseTools.py", line 124, in executeCommand cursor.execute(command) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/cursor.py", line 554, in execute self._handle_result(self._connection.cmd_query(stmt)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 495, in cmd_query result = self._handle_result(self._send_cmd(ServerCmd.QUERY, query)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 397, in _handle_result raise errors.get_exception(packet) DatabaseError: 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Command execution failed. Waiting 7.15856690367 seconds and trying again... UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:01:34.436607', job_id='28935158', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='1781640094.44', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:01:34.436607', job_id='28935158', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='17 WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory 81640094.44', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Traceback (most recent call last): File "/sdf/data/fermi/g/LCRepository/Likelihood/Scripts/DatabaseTools.py", line 124, in executeCommand cursor.execute(command) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/cursor.py", line 554, in execute self._handle_result(self._connection.cmd_query(stmt)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 495, in cmd_query result = self._handle_result(self._send_cmd(ServerCmd.QUERY, query)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 397, in _handle_result raise errors.get_exception(packet) DatabaseError: 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Command execution failed. Waiting 11.5704410605 seconds and trying again... UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:01:34.436607', job_id='28935158', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='1781640094.44', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:01:34.436607', job_id='28935158', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='1781640094.44', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Traceback (most recent call last): File "/sdf/data/fermi/g/LCRepository/Likelihood/Scripts/DatabaseTools.py", line 124, in executeCommand cursor.execute(command) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/cursor.py", line 554, in execute self._handle_result(self._connection.cmd_query(stmt)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 495, in cmd_query result = self._handle_result(self._send_cmd(ServerCmd.QUERY, query)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 397, in _handle_result raise errors.get_exception(packet) DatabaseError: 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Command execution failed. Waiting 21.7418089483 seconds and trying again... Analysis Complete. Tue Jun 16 13:02:15 PDT 2026 Done. Performing analysis on: 4FGL_J0115.1+2622_daily_bin2173 RA = 18.7784, Dec = 26.3733 tmin = 802569601, tmax = 802828801 emin = 100.0, emax = 100000.0 irfs = P8R3_SOURCE_V2 ROI = 12 zmax = 90 Fitting strategies: Fix sources to their catalog values = True Leave variable source normalizations free = True Perform pre-fit where ALL sources are frozen to catalog values = False Perform secondary fit with a free spectral index = True Remove all catalog sources = False Remove weak (TS < 2) catalog sources = False Freeze Galactic component = False Likelihood fit parameters: Statistic: UNBINNED Optimizer: MINUIT Catalog: 4FGL Repository job = True LAT data source: Data catalog Updating database... UPDATE lightcurve_data_v2 SET job_id='28935354', job_status='RUN', time_executed='2026-06-16 13:01:48.633072', time_epoch_executed='1781640108.63' WHERE source_name='4FGL J0115.1+2622' and cadence='daily' and bin_id='2173' UPDATE lightcurve_data_v2 SET job_id='28935354', job_status='RUN', time_executed='2026-06-16 13:01:48.633072', time_epoch_executed='1781640108.63' WHERE source_name='4FGL J0115.1+2622' and cadence='daily' and bin_id='2173' 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Traceback (most recent call last): File "/sdf/data/fermi/g/LCRepository/Likelihood/Scripts/DatabaseTools.py", line 124, in executeCommand cursor.execute(command) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/cursor.py", line 554, in execute self._handle_result(self._connection.cmd_query(stmt)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 495, in cmd_query result = self._handle_result(self._send_cmd(ServerCmd.QUERY, query)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 397, in _handle_result raise errors.get_exception(packet) DatabaseError: 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Command execution failed. Waiting 23.8687632451 seconds and trying again... UPDATE lightcurve_data_v2 SET job_id='28935354', job_status='RUN', time_executed='2026-06-16 13:01:48.633072', time_epoch_executed='1781640108.63' WHERE source_name='4FGL J0115.1+2622' and cadence='daily' and bin_id='2173' UPDATE lightcurve_data_v2 SET job_id='28935354', job_status='RUN', time_executed='2026-06-16 13:01:48.633072', time_epoch_executed='1781640108.63' WHERE source_name='4FGL J0115.1+2622' and cadence='daily' and bin_id='2173' 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Traceback (most recent call last): File "/sdf/data/fermi/g/LCRepository/Likelihood/Scripts/DatabaseTools.py", line 124, in executeCommand cursor.execute(command) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/cursor.py", line 554, in execute self._handle_result(self._connection.cmd_query(stmt)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 495, in cmd_query result = self._handle_result(self._send_cmd(ServerCmd.QUERY, query)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 397, in _handle_result raise errors.get_exception(packet) DatabaseError: 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Command execution failed. Waiting 13.8152261675 seconds and trying again... Done. Creating custom output directory: /lscratch/kocevski/28935354 Creating custom pfile directory: /lscratch/kocevski/28935354/pfiles/ Retrieving the FT1 file... Issuing command: datacat find --group FT1 --filter 'nMetStop>=802569601.0 && nMetStart<802828801.number of points = 7429 number of fields = 31 RA_SUN column already exists. File will not be modified. 0' /Data/Flight/Reprocess/P305 Issuing command: datacat find --group FT1 --filter 'nMetStart>564945418 && nMetStop>=802569601.0 && nMetStart<802828801.0' /Data/Flight/Level1/LPA Retrieving 46 files... Done. Merging files... Checksum keywords updated successfully. Merged file saved to: /lscratch/kocevski/28935354/ft1_4FGL_J0115.1+2622_daily_bin2173.fits Retrieving the FT1 file... Issuing command: datacat find --group FT2 --filter 'nMetStop>=802569601.0 && nMetStart<802828801.0' /Data/Flight/Level1/LPA Retrieving 46 files... Done. Merging files... Merged file saved to: /lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits Selecting the photons: time -p gtselect infile=/lscratch/kocevski/28935354/ft1_4FGL_J0115.1+2622_daily_bin2173.fits outfile=/lscratch/kocevski/28935354/ft1_filteredMKT_4FGL_J0115.1+2622_daily_bin2173.fits ra=18.7784 dec=26.3733 rad=12.0 tmin=802569601.0 tmax=802828801.0 emin=100.0 emax=100000.0 zmin=0.0 zmax=90.0 evclass=128 evtype="INDEF" convtype=-1 phasemin=0.0 phasemax=1.0 evtable="EVENTS" chatter=2 clobber=yes debug=no gui=no mode="ql" WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). Done. real 3.40 user 2.64 sys 0.19 Adding sun position to ft2 file: /sdf/group/fermi/g/LCRepository/Repository/bin/sunpos /lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits Selecting the good time intervals: time -p gtmktime scfile=/lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits sctable="SC_DATA" filter="IN_SAA!=T && LIVETIME>0 && gtifilter('/sdf/group/fermi/g/LCRepository/Likelihood/GTIs/nogrb.gti',(START+STOP)/2) && (angsep(RA_SUN,DEC_SUN,RA_ZENITH,DEC_ZENITH)>115 || gtifilter('/sdf/group/fermi/g/LCRepository/Likelihood/GTIs/nosolarflares.gti',(START+STOP)/2))" roicut=no evfile=/lscratch/kocevski/28935354/ft1_filteredMKT_4FGL_J0115.1+2622_daily_bin2173.fits evtable="EVENTS" outfile="/lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits" apply_filter=yes overwrite=yes header_obstimes=yes tstart=0.0 tstop=0.0 gtifile="default" chatter=3 clobber=yes debug=no gui=no mode="ql" WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). This is gtmktime version HEAD Applying GTI filter: IN_SAA!=T && LIVETIME>0 && gtifilter('/sdf/group/fermi/g/LCRepository/Likelihood/GTIs/nogrb.gti',(START+STOP)/2) && (angsep(RA_SUN,DEC_SUN,RA_ZENITH,DEC_ZENITH)>115 || gtifilter('/sdf/group/fermi/g/LCRepository/Likelihood/GTIs/nosolarflares.gti',(START+STOP)/2)) real 1.05 user 0.20 sys 0.14 Number of photons that the gtmktime cut: 689 Generating the livetime cube: time -p gtltcube evfile="/lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits" evtable="EVENTS" scfile=/lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits sctable="SC_DATA" outfile=/lscratch/kocevski/28935354/ltcube_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits dcostheta=0.025 binsz=1.0 phibins=0 tmin=0.0 tmax=0.0 file_version="1" zmin=0.0 zmax=90.0 chatter=2 clobber=yes debug=no gui=no mode="ql" WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). Working on file /lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits .....................! real 8.39 user 7.71 sys 0.23 Generating the exposure map: time -p gtexpmap evfile=/lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits evtable="EVENTS" scfile=/lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits sctable="SC_DATA" expcube=/lscratch/kocevski/28935354/ltcube_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits outfile=/lscratch/kocevski/28935354/expmap_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits irfs="P8R3_SOURCE_V2" evtype="INDEF" srcrad=30.0 nlong=88 nlat=88 nenergies=10 submap=no nlongmin=0 nlongmax=0 nlatmin=0 nlatmax=0 chatter=2 clobber=yes debug=no gui=no mode="ql" WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). The exposure maps generated by this tool are meant to be used for *unbinned* likelihood analysis only. Do not use them for binned analyses. Computing the ExposureMap using /lscratch/kocevski/28935354/ltcube_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits .....................! real 71.07 user 66.06 sys 4.13 Generating the xml model: radLim = 0.001 maxRad = 12 normsOnly = True freeVariableSources = True Fixing all sources to their catalog values, except variable sources Creating file and adding sources from 4FGL Added 167 point sources and 0 extended sources Setting source of interest to: 4FGL J0115.1+2622 @ 18.7784 26.3733 Creating the counts map: time -p gtbin evfile=/lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits scfile=/lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits outfile=/lscratch/kocevski/28935354/cmap_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits algorithm="CMAP" ebinalg="LOG" emin=30.0 emax=200000.0 ebinfile=NONE tbinalg="LIN" tbinfile=NONE nxpix=160 nypix=160 binsz=0.25 coordsys="CEL" xref=18.7784 yref=26.3733 axisrot=0.0 rafield="RA" decfield="DEC" proj="AIT" hpx_ordering_scheme="RING" hpx_order=3 hpx_ebin=yes hpx_region="" evtable="EVENTS" sctable="SC_DATA" efield="ENERGY" tfield="TIME" chatter=2 clobber=yes debug=no gui=no mode="ql" WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). This is gtbin version HEAD real 1.20 user 0.23 sys 0.12 Creating the high resolution counts map: time -p gtbin evfile=/lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits scfile=/lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits outfile=/lscratch/kocevski/28935354/cmap_HighResolution_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits algorithm="CMAP" ebinalg="LOG" emin=30.0 emax=200000.0 ebinfile=NONE tbinalg="LIN" tbinfile=NONE nxpix=500 nypix=500 binsz=0.1 coordsys="CEL" xref=18.7784 yref=26.3733 axisrot=0.0 rafield="RA" decfield="DEC" proj="AIT" hpx_ordering_scheme="RING" hpx_order=3 hpx_ebin=yes hpx_region="" evtable="EVENTS" sctable="SC_DATA" efield="ENERGY" tfield="TIME" chatter=2 clobber=yes debug=no gui=no mode="ql" WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). This is gtbin version HEAD real 0.90 user 0.23 sys 0.13 Computing the diffuse response: time -p gtdiffrsp evfile=/lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits evtable="EVENTS" scfile=/lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits sctable="SC_DATA" srcmdl=/lscratch/kocevski/28935354/Model_4FGL_J0115.1+2622_daily_bin2173.xml irfs="P8R3_SOURCE_V2" evclsmin=0 evclass="INDEF" evtype="INDEF" convert=yes chatter=2 clobber=yes debug=no gui=no mode="ql" WARNING: version mismatch between CFITSIO header (v3.43) and linked library (v3.41). adding source EG_v02 adding source GAL_V02 Working on... /lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits.....................! real 32.70 user 30.87 sys 1.01 Creating the likelihood object... obs = UnbinnedObs('/lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits', '/lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits', expMap='/lscratch/kocevski/28935354/expmap_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits', expCube='/lscratch/kocevski/28935354/ltcube_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits', irfs='P8R3_SOURCE_V2') like = UnbinnedAnalysis(obs, '/lscratch/kocevski/28935354/Model_4FGL_J0115.1+2622_daily_bin2173.xml', optimizer='MINUIT') Using source of interest name: '4FGL J0115.1+2622' 4FGL J0115.1+2622 Spectrum: PowerLaw 240 Prefactor: 2.667e+00 0.000e+00 0.000e+00 1.000e+06 ( 1.000e-14) 241 Index: 2.211e+00 0.000e+00 0.000e+00 1.000e+01 (-1.000e+00) fixed 242 Scale: 2.453e+03 0.000e+00 3.000e+01 5.000e+05 ( 1.000e+00) fixed Likelihood Fit Parameters: Event file(s): /lscratch/kocevski/28935354/ft1_filtered_4FGL_J0115.1+2622_daily_bin2173.fits Spacecraft file(s): /lscratch/kocevski/28935354/ft2_4FGL_J0115.1+2622_daily_bin2173.fits Exposure map: /lscratch/kocevski/28935354/expmap_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits Exposure cube: /lscratch/kocevski/28935354/ltcube_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.fits IRFs: P8R3_SOURCE_V2 Source model file: /lscratch/kocevski/28935354/Model_4FGL_J0115.1+2622_daily_bin2173.xml Optimizer: MINUIT Statistic: UNBINNED Performing an iterative likelihood fit... Fit tolerance = 1 Performing likelihood fit... Done. MINUIT Return Code (Fixed Index): 0 logL (Fixed Index) = 7789.85736297 Fit tolerance = 0.0001 Performing likelihood fit... Done. MINUIT Return Code (Fixed Index): 0 logL (Fixed Index) = 7789.82679392 Fit tolerance = 1e-08 Performing likelihood fit... ********** ** 14 **SET NOWARN ********** PARAMETER DEFINITIONS: NO. NAME VALUE STEP SIZE LIMITS 1 'Prefactor ' .46824E-03 1.0000 .0000 .10000E+07 2 'norm ' 1.1538 1.0000 .0000 .10000E+07 3 'norm ' .31186E-04 1.0000 .0000 .10000E+07 4 'Prefactor ' .49055E-06 1.0000 .0000 .10000E+07 5 'Prefactor ' .54028 1.0000 .0000 .10000E+07 6 'norm ' .34305 1.0000 .0000 .10000E+07 7 'norm ' .41609 1.0000 .0000 .10000E+07 8 'Prefactor ' .78749E-03 1.0000 .0000 .10000E+07 9 'Prefactor ' .78834E-04 1.0000 .0000 .10000E+07 10 'Prefactor ' .24729E-05 1.0000 .0000 .10000E+07 11 'Prefactor ' .10884E-03 1.0000 .0000 .10000E+07 12 'norm ' 1.5423 1.0000 .0000 .10000E+07 13 'Prefactor ' .46618E-06 1.0000 .0000 .10000E+07 14 'Prefactor ' .50677E-03 1.0000 .0000 .10000E+07 15 'norm ' 2.0769 1.0000 .0000 .10000E+07 16 'Normalizat' 1.0529 1.0000 .10000E-01 10.000 17 'Prefactor ' 1.0597 1.0000 .0000 10.000 ********** ** 15 **SET ERR .5000 ********** ********** ** 16 **SET GRAD 1.000 ********** ********** ** 17 **MINIMIZE .5350E+05 .2000E-04 ********** MIGRAD MINIMIZATION HAS CONVERGED. FCN= 7789.827 FROM MIGRAD STATUS=CONVERGED 117 CALLS 961 TOTAL EDM= .31E-10 STRATEGY=1 ERROR MATRIX UNCERTAINTY= 1.2% EXT PARAMETER STEP FIRST NO. NAME VALUE ERROR SIZE DERIVATIVE 1 Prefactor .27756E-09 46.192 -.15374E-05** at limit ** 2 norm 1.1521 1.9459 -.30161E-07 .13091E-02 3 norm .0000 1.8414 .16151E-06** at limit ** 4 Prefactor .0000 4.1412 .89746E-07** at limit ** 5 Prefactor .60947 .63890 -.15130E-07 .90254E-05 6 norm .34305 .32874 .81331E-07 .34217E-02 7 norm .41467 .91550 -.20450E-06 .47324E-03 8 Prefactor .0000 8.6049 -.12591E-05** at limit ** 9 Prefactor .0000 2.1376 .17374E-06** at limit ** 10 Prefactor .55511E-10 7.6422 .35567E-05** at limit ** 11 Prefactor .11102E-09 17.688 .16773E-06** at limit ** 12 norm 1.5419 .66838 -.53005E-08 .80475E-03 13 Prefactor .0000 3.2085 .69346E-06** at limit ** 14 Prefactor .55511E-10 7.2351 -.38051E-05** at limit ** 15 norm 2.0779 2.6389 .12759E-06 .14217E-03 16 Normalizat 1.0530 .22001 -.60540E-05 .12167E-03 17 Prefactor 1.0597 .14201 .25326E-05 .13849E-03 ERR DEF= .500 Final values: Prefactor = 2.77556e-10 norm = 1.15214 norm = 0 Prefactor = 0 Prefactor = 0.609472 norm = 0.343052 norm = 0.414667 Prefactor = 0 Prefactor = 0 Prefactor = 5.55112e-11 Prefactor = 1.11022e-10 norm = 1.54187 Prefactor = 0 Prefactor = 5.55112e-11 norm = 2.07791 Normalizat = 1.05303 Prefactor = 1.05965 ********** ** 18 **HESSE ********** FCN= 7789.827 FROM HESSE STATUS=OK 255 CALLS 1216 TOTAL EDM= .12E-08 STRATEGY= 1 ERROR MATRIX ACCURATE EXT PARAMETER INTERNAL INTERNAL NO. NAME VALUE ERROR STEP SIZE VALUE 1 Prefactor .27756E-09 46.173 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 2 norm 1.1521 2.0034 .10754E-02 -1.5686 3 norm .0000 1.8412 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 4 Prefactor .0000 4.1395 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 5 Prefactor .60947 76.351 .74757E-03 -1.5692 6 norm .34305 .32062 .96405E-03 -1.5696 7 norm .41467 .99101 .28171E-02 -1.5695 8 Prefactor .0000 8.6177 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 9 Prefactor .0000 2.1312 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 10 Prefactor .55511E-10 7.6341 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 11 Prefactor .11102E-09 17.719 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 12 norm 1.5419 .66815 .85806E-03 -1.5683 13 Prefactor .0000 3.2126 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 14 Prefactor .55511E-10 7.2455 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 15 norm 2.0779 2.6505 .71637E-03 -1.5679 16 Normalizat 1.0530 .18907 .67899E-01 -.91275 17 Prefactor 1.0597 .11986 .39372E-01 -.90767 ERR DEF= .500 Minuit fit quality: 3 estimated distance: 1.24067e-09 Minuit parameter uncertainties: 1 0.000234943 2 2.00338 3 2.9295e-06 4 4.15656e-06 5 13.6433 6 0.320624 7 0.991014 8 2.1393e-05 9 1.87719e-06 10 4.19208e-05 11 8.13413e-05 12 0.668151 13 1.59787e-05 14 3.41441e-05 15 2.65052 16 0.189189 17 0.119889 Done. MINUIT Return Code (Fixed Index): 0 logL (Fixed Index) = 7789.82666297 Extracting fit parameters... 4FGL J0115.1+2622 Spectrum: PowerLaw 240 Prefactor: 0.000e+00 2.139e-05 0.000e+00 1.000e+06 ( 1.000e-14) 241 Index: 2.211e+00 0.000e+00 0.000e+00 1.000e+01 (-1.000e+00) fixed 242 Scale: 2.453e+03 0.000e+00 3.000e+01 5.000e+05 ( 1.000e+00) fixed GAL_V02 Spectrum: PowerLaw 532 Prefactor: 1.060e+00 1.199e-01 0.000e+00 1.000e+01 ( 1.000e+00) 533 Index: 0.000e+00 0.000e+00 -1.000e+00 1.000e+00 ( 1.000e+00) fixed 534 Scale: 1.000e+02 0.000e+00 5.000e+01 2.000e+02 ( 1.000e+00) fixed EG_v02 Spectrum: FileFunction 531 Normalization: 1.053e+00 1.892e-01 1.000e-02 1.000e+01 ( 1.000e+00) TS (Fixed Index): 0.00 Ra Dec: 18.778 26.373 Photon Flux Upper Limit: 4.36788848528e-08 ph cm-2 s-1 Energy Flux Upper Limit: 0.00333072525564 MeV cm-2 s-1 Saving results to: /lscratch/kocevski/28935354/likelihoodResults_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.txt Performing a free index iterative likelihood fit... Freezing all point sources, except source of interest... Done. Freeing candidate source... Done. Fit tolerance = 1 Performing likelihood fit... Done. MINUIT Return Code (Free Index): 102 logL (Free Index) = 7789.88210283 delta logL = -0.0554398545228 Fit tolerance = 0.0001 Performing likelihood fit... Done. MINUIT Return Code (Free Index): 102 logL (Free Index) = 7789.82666313 delta logL = -1.60018316819e-07 Fit tolerance = 1e-08 Performing likelihood fit... ********** ** 14 **SET NOWARN ********** PARAMETER DEFINITIONS: NO. NAME VALUE STEP SIZE LIMITS 1 'Prefactor ' .30090E-05 1.0000 .0000 .10000E+07 2 'Index ' .99689 1.0000 .0000 10.000 3 'Normalizat' 1.0530 1.0000 .10000E-01 10.000 4 'Prefactor ' 1.0597 1.0000 .0000 10.000 ********** ** 15 **SET ERR .5000 ********** ********** ** 16 **SET GRAD 1.000 ********** ********** ** 17 **MINIMIZE .5350E+05 .2000E-04 ********** MIGRAD MINIMIZATION HAS CONVERGED. MIGRAD WILL VERIFY CONVERGENCE AND ERROR MATRIX. MNHESS FAILS AND WILL RETURN DIAGONAL MATRIX. FCN= 7789.827 FROM MIGRAD STATUS=CONVERGED 37 CALLS 238 TOTAL EDM= .23E-10 STRATEGY=1 ERROR MATRIX UNCERTAINTY=100.0% EXT PARAMETER APPROXIMATE STEP FIRST NO. NAME VALUE ERROR SIZE DERIVATIVE 1 Prefactor .0000 13.906 .42118E-03** at limit ** 2 Index 1.7309 1.6873 .85102E-04 .0000 3 Normalizat 1.0530 1.1996 -.13711E-05 -.17460E-03 4 Prefactor 1.0597 1.1809 -.71167E-07 -.26202E-03 ERR DEF= .500 Final values: Prefactor = 0 Index = 1.7309 Normalizat = 1.05302 Prefactor = 1.05965 ********** ** 18 **HESSE ********** MNHESS FAILS AND WILL RETURN DIAGONAL MATRIX. FCN= 7789.827 FROM HESSE STATUS=FAILED 9 CALLS 247 TOTAL EDM= .23E-10 STRATEGY=1 ERROR MATRIX UNCERTAINTY=100.0% EXT PARAMETER APPROXIMATE INTERNAL INTERNAL NO. NAME VALUE ERROR STEP SIZE VALUE 1 Prefactor .0000 13.906 .42118E-03 -1.5708 WARNING - - ABOVE PARAMETER IS AT LIMIT. 2 Index .30001 1.7740 .85102E-04 -.71262 3 Normalizat 1.0530 1.1996 -.13711E-05 -.91275 4 Prefactor 1.0597 1.1809 -.71167E-07 -.90767 ERR DEF= .500 Minuit fit quality: 1 estimated distance: 2.25034e-11 Minuit parameter uncertainties: 1 2.2176e-05 2 1.74893 3 1.23283 4 1.21194 Done. MINUIT Return Code (Free Index): 101 logL (Free Index) = 7789.82666297 delta logL = -9.09494701773e-12 Extracting fit parameters... 4FGL J0115.1+2622 Spectrum: PowerLaw 240 Prefactor: 0.000e+00 2.218e-05 0.000e+00 1.000e+06 ( 1.000e-14) 241 Index: 1.731e+00 1.749e+00 0.000e+00 1.000e+01 (-1.000e+00) 242 Scale: 2.453e+03 0.000e+00 3.000e+01 5.000e+05 ( 1.000e+00) fixed GAL_V02 Spectrum: PowerLaw 532 Prefactor: 1.060e+00 1.212e+00 0.000e+00 1.000e+01 ( 1.000e+00) 533 Index: 0.000e+00 0.000e+00 -1.000e+00 1.000e+00 ( 1.000e+00) fixed 534 Scale: 1.000e+02 0.000e+00 5.000e+01 2.000e+02 ( 1.000e+00) fixed EG_v02 Spectrum: FileFunction 531 Normalization: 1.053e+00 1.233e+00 1.000e-02 1.000e+01 ( 1.000e+00) TS (Free Index): 0.00 Ra Dec: 18.778 26.373 Creating a high resolution counts map... INFO: Auto-setting vmin to -1.000e-01 [aplpy.core] INFO: Auto-setting vmax to 1.110e+00 [aplpy.core] Saving /lscratch/kocevski/28935354/cmap_HighResolution_802569601_802828801_4FGL_J0115.1+2622_daily_bin2173.png Cleaning up... ** Nuclear option initiated! ** Updating database... UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:08:13.088891', job_id='28935354', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='1781640493.09', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:08:13.088891', job_id='28935354', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='1781640493.09', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Traceback (most recent call last): File "/sdf/data/fermi/g/LCRepository/Likelihood/Scripts/DatabaseTools.py", line 124, in executeCommand cursor.execute(command) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/cursor.py", line 554, in execute self._handle_result(self._connection.cmd_query(stmt)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 495, in cmd_query result = self._handle_result(self._send_cmd(ServerCmd.QUERY, query)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 397, in _handle_result raise errors.get_exception(packet) DatabaseError: 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Command execution failed. Waiting 22.8445489942 seconds and trying again... UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:08:13.088891', job_id='28935354', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='1781640493.09', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; UPDATE lightcurve_data_v2 SET energy_flux_upper_limit='3.33e-03', job_status='DONE', photon_flux_upper_limit='4.37e-08', time_completed='2026-06-16 13:08:13.088891', job_id='28935354', GAL2='1.06', fit_tolerance='1e-08', EG2='1.05', EG='1.05', time_epoch_completed='17shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory 81640493.09', return_code2='101', ts='0.00', comment='SUCCESS', return_code='0', GAL='1.06', dlogl='-9.09e-12', ts2='0.00', photon_index_error='0.00', photon_index='2.21' WHERE bin_id='2173' AND source_name='4FGL J0115.1+2622' AND cadence='daily'; 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Traceback (most recent call last): File "/sdf/data/fermi/g/LCRepository/Likelihood/Scripts/DatabaseTools.py", line 124, in executeCommand cursor.execute(command) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/cursor.py", line 554, in execute self._handle_result(self._connection.cmd_query(stmt)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 495, in cmd_query result = self._handle_result(self._send_cmd(ServerCmd.QUERY, query)) File "/sdf/group/fermi/u/kocevski/software/conda/envs/fermitools_v1.0.5/lib/python2.7/site-packages/mysql/connector/connection.py", line 397, in _handle_result raise errors.get_exception(packet) DatabaseError: 1290 (HY000): The MySQL server is running with the --read-only option so it cannot execute this statement Command execution failed. Waiting 25.2351557732 seconds and trying again... Analysis Complete. Tue Jun 16 13:09:01 PDT 2026